Rapid colorimetric sensing of tetracycline antibiotics with in situ growth of gold nanoparticles

A colorimetric assay utilizing the formation of gold nanoparticles was developed to detect tetracycline antibiotics in fluidic samples. Tetracycline antibiotics showed the capability of directly reducing aurate salts into atomic gold which form gold nanoparticles spontaneously under proper conditions. The resulted gold nanoparticles showed characteristic plasmon absorbance at 526 nm, which can be visualized by naked eyes or with a spectrophotometer. UV–vis absorbance of the resulted gold nanoparticles is correlated directly with the concentrations of tetracycline antibiotics in the solution, allowing for quantitative colorimetric detection of tetracycline antibiotics. Reaction conditions, such as pH, temperature, reaction time, and ionic strength were optimized. Sensitivity of the colorimetric assay can be enhanced by the addition of gold nanoparticle seeds, a LOD as low as 20 ng mL⁻¹ can be achieved with the help of seed particles. The colorimetric assay showed minimum interference from ethanol, methanol, urea, glucose, and other antibiotics such as sulfonamides, amino glycosides etc. Validity of the method was also evaluated on urine samples spiked with tetracycline antibiotics. The method provides a broad spectrum detection method for rapid and sensitive detection of reductive substances such as tetracycline antibiotics in liquid and biological samples.     

Capability of detection and three-way data

Due to the possibility of making analytical determinations in the presence of non-modelled interferents and to identify the analyte of interest, calibrations based on scores of PARAFAC decomposition of three-way data are becoming increasingly important in routine analysis.Furthermore, the IUPAC and EU (European Decision 2002/657/EC) have accepted the definition given by the ISO 11843 for the capability of detection as the minimum net quantity detectable with a pre-set probability of false positive and false negative. What is more, recently our research group has generalised this definition of capability of detection, CCβ, to multivariate calibrations. In practice, CCβ is a good measure of the quality of the calibration because in its definition it brings together analytical sensitivity with precision in analytical determinations.This paper studies the effect of the pre-treatment of the sample, the signal/noise ratio and the second-order advantage on CCβ when using second-order signals modelled by PARAFAC. All of them are experimental factors which influence the quality of the calibration. Analytical pre-treatment is habitual in the analysis of real samples. Specifically, we analyse the effect of the extraction phase and the clean-up of milk samples on the determination of chlortetracycline by HPLC-DAD. It is shown that it is more efficient to do the joint PARAFAC decomposition of the pure standards with the milk samples.Secondly, the effect of asymmetry on CCβ, according to the path of the noise of the signals, is studied. Specifically, in the determination of naphthalene by excitation-emission spectroscopy, EEM, it is the emission spectrum which limits the capability of detection. It is shown that by eliminating the spectra with the poorest signal/noise ratio in this path, the capability of detection can be substantially improved.Thirdly, the impact on CCβ when the second-order advantage is used, that is when PARAFAC calibration is used over samples with an unknown interference not modelled in the calibration step. This is important to apply a PARAFAC calibration to routine analysis in the IUPAC and European Decision framework. Specifically, in the determination of enrofloxacine in poultry feeding water through excitation-emission fluorescence CCβ is evaluated when the PARAFAC is built only with calibration samples or with the calibration samples plus the test samples with uncalibrated and unknown interferent.     

Structural aspects of phencyclidines: crystal structure and quantum mechanical calculations for 1-[1-(2-thienyl)cyclohexyl] piperidine and its hydrochloride

Crystal structure determinations for neutral and protonated phencyclidine, 1-[1-(2-thienyl)cyclohexyl] piperidine, show that the piperidine-axial conformer on the cyclohexane ring is present in the neutral compound, and that the piperidine-equatorial conformer in the protonated species. Quantum mechanical calculations in vacuo using ab initio techniques also arrive at the same conclusion. A search of the crystallographic literature via the Cambridge structural database reveals that all protonated phencyclidines assume the piperidine-equatorial conformation, and most neutral phencyclidines assume the piperidine-axial conformation.     

Simple and sensitive spectrophotometric methods for determination of amantadine hydrochloride

Three simple and sensitive spectrophotometric methods (A–C) for determination of amantadine hydro-chloride have been developed and validated. The first method (A) is based on the oxidation of the drug by ammonium molybdate. The second method (B) was based on the charge-transfer complexation reaction between the amantadine base as an electron donor and iodine as a σ-acceptor. The third method (C) is based on the reaction of N-alkylvinylamine formed from the interaction of the free amino group in amantadine molecule and acetalde-hyde with chloranil to give colored vinylamino-substituted benzoquinone. The colored products of these reactions were measured at their corresponding maximum absorption peaks. Different variables affecting the reactions were carefully studied and optimized. Under the optimum conditions, linear relationships with good correlation coefficients 0.9993–0.9998 were found between the reading and the corresponding concentration of the drug in the range 2–90 μg·ml⁻¹. The limits of detection ranged from 0.16 to 1.91 μg·ml⁻¹. The precision of the methods was satisfactory: the values of relative standard deviation did not exceed 1.63%. The proposed methods were successfully applied to the analysis of amantadine HCl in its capsules with good accuracy and precision; the label claim percentages ranged from 99.8 to 100.5 ± (0.52–1.22) %. The results obtained by the proposed spectrophotometric methods were comparable with those obtained by the official method. Published in Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 6, pp. 707–712.     

An Efficient and Economical Method for the Preparation of Fmoc-Argω,ω'(Boc)2-OH

The arginine derivative Fmoc‐Arg^ω,ω′(Boc)₂‐OH has been prepared in perfect yield starting from Fmoc‐Orn·HCl and N,N′‐di‐Boc‐N′′‐triflyguanidine with the presence of diisopropylethylamine (DIEA). This work provides an efficient and economical method for the preparation of this compound.     

Influence of Crosslinking Agent on the Release of Drug from the Matrix Transdermal Patches of HPMC/Eudragit RL 100 Polymer Blends

The present work was designed to develop suitable transdermal matrix patches using the polymer blends of hydroxy propyl methyl cellulose (HPMC) and Eudragit RL100 (ERL) with triethyl citrate as a plasticizer in group A and in group B, other than HPMC and ERL, crosslinking agent, succinic acid was added. A 3² full factorial design was employed for both groups. The concentration of HPMC and ERL were used as independent variables, while percentage drug release was selected as dependent variable. Physical evaluation was performed such as moisture content, moisture uptake, tensile strength, flatness and folding endurance. In vitro diffusion studies were performed using cellulose acetate membrane (pore size 0.45 μ) in a Franz's diffusion cell. The concentration of diffused drug was measured using UV-visible spectrophotometer (V-530, Jasco) at λ _max 272 nm. The experimental results shows that the transdermal drug delivery system (TDDS) containing ERL in higher proportion gives sustained the release of drug and patches containing crosslinking agent shows more release than those do not contains succinic acid.     

A novel CHS/ALG bi-layer composite membrane with sustained antimicrobial efficacy used as wound dressing

<正>A membrane composed of an alginate(ALG) layer and a chitosan(CHS) layer with sustained antimicrobial efficacy was prepared.Ciprofloxacin HC1(CIP) was incorporated into the ALG layer.Morphological feature of the composite membrane was analyzed by scanning electron microscopy(SEM).Water uptake capacity,in vitro drug release,and in vitro antimicrobial activity were evaluated.The composite membrane exhibited perfect binding characteristic between the two layers.The water uptake capacity of all the membranes was above 800%.The CIP could release from the composite membranes for 48 h.The membrane could control the bacterial growth persistently.The results suggested that this CHS/ALG composite membrane incorporated with CIP had the potential for wound dressing application.     

The C–HCl2Cu(II) synthon in the structural direction and assembly of supramolecular complexes with the 3,3′-bis(2-benzimidazolyl)-2,2′-dipyridine ligand and its N-substituted derivatives

Three new Cu(II) supramolecular complexes [Cu(L₁)Cl₂]·2DMF (1), [Cu(L₂)Cl₂] (2) and [Cu(L₃)Cl₂]·DMF (3) (L₁ = 3,3′-bis(2-benzimidazolyl)-2,2′-dipyridine, L₂ = 3,3′- bis(N-ethyl-2-benzimidazolyl)-2,2′-dipyridine and L₃ = 3,3′-bis(N-benzyl-2-benzimidazolyl)-2,2′-dipyridine) have been prepared and characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. X-ray structural analysis of L₁, L₂·3.5H₂O and L₃·H₂O indicates that all three ligands adopt the trans conformation with the two benzimidazole fragments located on opposite sides of the dipyridyl backbone. While in complexes 1–3, all the ligands display the cis conformation and behave as bidentate chelating reagents to coordinate with Cu(II). The inorganic chloride ions always act as a reliable hydrogen bonded acceptor in these structures, and the resulting C–HCl₂Cu supramolecular synthons play a significant role in the formation and stabilization of the structures. Moreover, additional non-covalent interactions, such as C–Hπ, are also identified to extend the discrete (0-D) or low-dimensional (1-D) motifs into high-dimensional architectures.     

Synthesis and growth mechanism of zirconia nanotubes by anodization in electrolyte containing Cl−

The formation and growth of a self-organized zirconia porous layer can be achieved directly by anodization of Zr in chloride containing electrolytes. The morphology of the porous layers is affected by electrochemical conditions such as Cl⁻ concentration. Zirconia nanotubes with diameters ranging from 250 to 300 nm and a length of 33 μm were formed under proper conditions. The nanotubes have smooth and straight walls. The composition of the nanotubes was characterized by using an energy dispersive spectrometer. Selected area electron diffraction investigation reveals that the as-anodized zirconia nanotubes have an amorphous structure. Crystal phase transition and structural stability of the ZrO₂ nanotubes after heat treatment were characterized. A possible growth mechanism is presented.