Femtosecond laser structuring of titanium implants

In this study we perform the first femtosecond laser surface treatment of titanium in order to determine the potential of this technology for surface structuring of titanium implants. We find that the femtosecond laser produces a large variety of nanostructures (nanopores, nanoprotrusions) with a size down to 20 nm, multiple parallel grooved surface patterns with a period on the sub-micron level, microroughness in the range of 1-15 μm with various configurations, smooth surface with smooth micro-inhomogeneities, and smooth surface with sphere-like nanostructures down to 10 nm. Also, we have determined the optimal conditions for producing these surface structural modifications. Femtosecond laser treatment can produce a richer variety of surface structures on titanium for implants and other biomedical applications than long-pulse laser treatments.     

绕圆柱体自由表面磁流体流动和传热的研究

本文对在不同雷诺数下,绕圆柱体的磁流体自由表面流动及传热进行了模拟,分析了磁场对绕流圆柱尾迹和涡分离的影响,获得了两种雷诺数下的电磁力密度、流场和温度场分布。结果表明,磁场不仅影响了流动的形态,而且对湍流有抑制作用,降低了自由表面的更新机制,从而减少了传热能力;在相同的Hartmann数下,相比低雷诺数下的流动换热情况,高雷诺数下的湍流不能被完全抑制,自由表面与尾迹的相互作用也较强,因而自由表面换热也较强。     

Improved Lower Bounds for the Critical Probability of Oriented Bond Percolation in Two Dimensions

We present a coupled decreasing sequence of random walks on Z that dominate the edge process of oriented bond percolation in two dimensions. Using the concept of random walk in a strip, we describe an algorithm that generates an increasing sequence of lower bounds that converges to the critical probability of oriented percolation p_c. From the 7th term on, these lower bounds improve upon 0.6298, the best rigorous lower bound at present, establishing 0.63328 as a rigorous lower bound for p_c. Finally, a Monte Carlo simulation technique is presented; the use thereof establishes 0.64450 as a non-rigorous five-digit-precision (lower) estimate for p_c. Mathematics Subject Classification (1991): 60K35 Supported by CNPq (grant N.301637/91-1). Supported by a grant from CNPq.     

Studies on Fast Algorithm for the Scattering of a Large Array of Waveguide-Fed Wide-Slot Antennas in Millimeter Wave Region

We present an effective numerical technique to characterize the scattering of wide-slot antennas fed by waveguides with arbitrary terminations in terms of the method of moment (MoM) and the mixed potential integral equation (MPIE). In particular, the precorrected-fast Fourier transform (P-FFT) eliminates the need to generate and store the usual square impedance matrix andthus leads to speed up the matrix-vector multiplication in the resultant system. This property makes the Rao-Wilton-Glisson (RWG) functions to be useful in simulating electrically large-scale problems. In addition, the scattering from the finite ground surfaces is accounted for in the total scattered field by using the method of equivalent edge currents. The numerical results are presented and compared with both the traditional method of moment results obtained using the entire-domain basis functions and the experimental results, to demonstrate the proposed method to be a good candidate for study on the scattering of arbitrary wide-slot large array.     

Angular and NiFe thickness dependence of exchange bias in IrMn/NiFe/IrMn thin film

Exchange biased IrMn/NiFe/IrMn thin films were studied as a function of NiFe thickness. In plane angular dependence of a resonance field distribution which is measured by FMR was analyzed as a combined effect of an unidirectional anisotropy and an uniaxial anisotropy. The unidirectional anisotropic field and the uniaxial anisotropic field were linearly varied with NiFe thickness while the films with a thicker NiFe layer do not follow the linear variation. Resonance field and linewidth variations were also analysed with NiFe thickness.     

Determination of Thermal Conductivity of Liquids by a Multi-Point Laser Pump Method

As an advanced optical method, a multi-point pump method is presented for measurements of thermo-physical properties of liquids. Meanwhile, based on the laser-induced thermal grating method, a new theory model is presented and used to analyse the thermal effects caused by the multi-point laser pump, by which the thermal conductivity of liquids can be obtained. The results of some typical liquids, such as water, ethanol and acetone, are presented and are consistent with those of acknowledged values, demonstrating that the multi-point method is simple and useful for characterizing thermal properties of liquids.     

Role of the d-f Coulomb interaction in intermediate valence and Kondo systems: a numerical renormalization group study

Using the numerical renormalization group method, the dependences on temperature of the magnetic susceptibility χ(T) and specific heat C(T) are obtained for the single-impurity Anderson model with inclusion of d-f the Coulomb interaction. It is shown that the exciton effects caused by this effect (charge fluctuations) can significantly change the behaviour of C(T) in comparison with the standard Anderson model at moderately low temperatures, whereas the behaviour of χ(T) remains nearly universal. The ground-state and temperature-dependent renormalizations of the effective hybridization parameter and f-level position caused by the d-f interaction are calculated, and satisfactory agreement with the Hartree-Fock approximation is derived.     

Adaptive synchronization of a critical chaotic system

This paper further investigates the synchronization problem of a new chaotic system with known or unknown system parameters. Based on the Lyapunov stability theory, a novel adaptive control law is derived for the synchronization of a new chaotic system with known or unknown system parameters. Theoretical analysis and numerical simulations show the effectiveness and feasibility of the proposed schemes.     

用计算机绘制点电荷对的电场线

根据点电荷对的电场线公式设计程序,用计算机求出几种点电荷对的电场线上所有点,进行逐点描绘得到精确图形。     

Exchange‐coupled L10‐FePt/Fe composite patterns with perpendicular magnetization

L1₀‐FePt and exchange‐coupled L1₀‐FePt/Fe composite films are grown epitaxially on MgO(001) single crystal substrates and are subsequently large‐area patterned utilizing an electron beam lithography process with Ar⁺ ion etching. The patterning process of the continuous film system leads to a different demagnetization behavior resulting in an increase of the out‐of‐plane coercivity of the patterned samples. Due to exchange‐coupling between L1₀‐FePt and Fe the coercivity of the L1₀‐FePt/Fe composite patterns is reduced by 52% as compared to the coercivity of L1₀‐FePt patterns. From the analysis of the temperature dependence of the coercivity it follows that the dots include regions with reduced anisotropy. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)