Effect of ultrasound and chlorine dioxide on Salmonella Typhimurium and Escherichia coli inactivation in poultry chiller tank water

This study evaluated the application of ultrasound alone or combined with chlorine dioxide (ClO₂) for Salmonella Typhimurium and Escherichia coli inactivation in poultry processing chiller tank water. A Full Factorial Design (FFD) 2² was conducted for each microorganism to evaluate the effect of ultrasound exposure time (x₁: 1 to 9 min; fixed: 37 kHz; 330 W; 25 °C) using a bath, and ClO₂ concentration (x₂: 1 to 17 mg L⁻¹) on microorganism count expressed in log CFU mL⁻¹ in distilled water. Variable x₂ had a negative effect on Salmonella Typhimurium (-5.09) and Escherichia coli (-2.00) count, improving the inactivation; while a x₁ increase present no inactivation improvement, explaining the use of x₁ lower level (1 min) and x₂ higher level (17 mg L⁻¹). The best condition for microorganism inactivation based on FFD was evaluated in chiller tank water (with organic matter) at 25, 16, and 4 °C; x₁ was kept (1 min), however x₂ was adjusted to obtain the same residual free chlorine (2.38 mg L⁻¹) considering the ClO₂ consumption by organic matter, achieving the value of 30 mg L⁻¹. An inactivation of 49% and 31% were observed for Salmonella Typhimurium and Escherichia coli. When ultrasound was replaced by a simple agitation in the presence of ClO₂, there was no inactivation for both microorganisms. Moreover, at poultry carcass pre-chilling (16 °C) and chilling (4 °C) conditions, the synergism of ultrasound combined with ClO₂ was more pronounced, with microorganisms’ reductions up to 100%.     

消毒灭菌的电离辐射与电磁辐射等物理技术比较分析北大核心CSCD

消毒灭菌技术广泛应用于食品工业、医疗领域、水处理等方面。相对于传统化学和热效应的消毒灭菌方法,γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等物理手段具有不污染环境、消毒灭菌温度低、没有化学残留物等优点而日益受到重视。但这些物理技术手段各有不同,本文首先介绍了γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等消毒灭菌的技术原理,然后对比了各自优缺点和应用领域。每种方法都有优势和不足,应针对不同的消毒灭菌对象而选择不同的方式。最后,展望了消毒灭菌的发展方向,提出了消毒灭菌在家庭日常消毒、医疗垃圾处理、有人状态下的室内空气消毒等方面的迫切需求。     

Electrochemical alternatives for drinking water disinfection

Chlorination is the most common method worldwide for the disinfection of drinking water. However, the identification of potentially toxic products from this method has encouraged the development of alternative disinfection technologies. Among them, electrochemical disinfection has emerged as one of the more feasible alternatives to chlorination. This article reviews electrochemical systems that can contribute to drinking water disinfection and underscores the efficiency of recently developed diamond films in chlorine-free electrochemical systems.     

新型低共熔溶剂的制备及其在分散液-液微萃取水样中臧红T和胭脂红的应用EI北大核心CSCD

建立了一种基于低共熔溶剂的旋涡辅助分散液-液微萃取和高效液相色谱连用检测水样中臧红T和胭脂红染料的方法。制备了一类分别由苄基三乙基溴化铵、苄基三丁基溴化铵、苄基三乙基氯化铵或苄基三丁基氯化铵(氢键受体)和正辛酸(氢键供体)组成的新型疏水性低共熔溶剂。最佳萃取条件为:选取苄基三丁基氯化铵和正辛酸(摩尔比为1∶2)制备的低共熔溶剂为萃取剂,萃取剂用量为75μL,萃取时间为1 min,溶液pH=7,NaCl浓度为3 mg/mL。在最优化条件下,检测臧红T和胭脂红的线性范围为4.8~1000 ng/mL;相关系数(R^(2))分别为0.9981和0.9987;检出限分别为1.5和1.8 ng/mL;定量限均为4.8 ng/mL。将该方法应用于实际水样中臧红T和胭脂红的测定,加标回收率为88.5%~113.6%,相对标准偏差均低于8.8%。     

Formation of halogenated by-products of parabens in chlorinated water

Chemical transformations of four alkyl esters of p-hydroxybenzoic acid, parabens, in chlorinated water samples are investigated. Quantification of the parent species and identification of their reaction by-products were performed using gas chromatography in combination with mass spectrometry. Experiments were accomplished considering free chlorine and paraben concentrations at the mg L⁻¹ and μg L⁻¹ level, respectively. Concentration of water samples, using solid-phase extraction, and silylation of the target species were carried out in order to improve the detectability of parent species and their possible transformation products, achieving quantification limits at the low ng L⁻¹ level. Under employed experimental conditions, the decrease in the concentrations of parabens followed pseudo-first-order kinetics. Half-lives values obtained for model ultrapure water solutions were in good agreement with those observed in tap water samples. For the first type of sample, only two by-products were detected for each paraben. They corresponded to chlorination of the aromatic ring in one or two carbons situated in ortho-positions to the hydroxyl group. Both species were also generated after the addition of parabens to chlorinated tap water. Moreover, three new transformation products were noticed for each parent compound. They were identified as bromo- and bromochloro-parabens, formed due to the existence of traces of bromide in tap water sources. Experiments carried out by mixing paraben-containing personal care products with tap water, containing free chlorine, confirmed the formation of all above described halogenated by-products. In addition, the presence of the di-chlorinated forms of methyl and propyl paraben has been detected for first time in raw sewage water samples.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Factors affecting atrazine concentration and quantitative determination in chlorinated water

Although the herbicide atrazine has been reported to not react measurably with free chlorine during drinking water treatment, this work demonstrates that at contact times consistent with drinking water distribution system residence times, a transformation of atrazine can be observed. Some transformation products detected through the use of high performance liquid chromatography–electrospray mass spectrometry are consistent with the formation of N-chloro atrazine. The effects of applied chlorine, pH, and reaction time on the transformation reaction were studied to help understand the practical implications of the transformation on the accurate determination of atrazine in drinking waters. The errors in the determination of atrazine are a function of the type of dechlorinating agent applied during sample preparation and the analytical instrumentation utilized. When a reductive dechlorinating agent, such as sodium sulfite or ascorbic acid is used, the quantification of the atrazine can be inaccurate, ranging from 2-fold at pH 7.5 to 30-fold at pH 6.0. The results suggest HPLC/UV and ammonium chloride quenching may be best for accurate quantification. Hence, the results also appear to have implications for both compliance monitoring and health effects studies that utilize gas chromatography analysis with sodium sulfite or ascorbic acid as the quenching agent.     

Theoretical investigation of the kinetics for the hydrogen abstraction reaction of 1,1,1,2-tetrafluoroethane (HFC-134a) by chlorine radical

The hydrogen abstraction reaction of 1,1,1,2-tetrafluoroethane (HFC-134a) by chlorine radical is investigated by theoretical calculations. Equilibrium geometries and harmonic vibrational frequencies of the reactants, transition state, and products are calculated using high-level ab initio methods. Rate constants of forward and backward reactions for the temperatures from 200 to 1000 K are calculated using classical transition state theory with Eckart tunneling correction, fitted in the expressions k_f (T) = 1.19 × 10⁻²³T^3.93exp (−1110/T), and k_b (T) = 8.86 × 10⁻²⁴T^3.32exp (−959/T) cm³ molecule⁻¹ s⁻¹ for forward and backward reactions, respectively, and are in reasonable agreement with the available experimental values.     

气相色谱-质谱法检测饮用水新生含氮消毒副产物氯代乙酰胺

建立了气相色谱-质谱(GC-MS)法检测饮用水中新生致突变含氮消毒副产物(N-DBPs)二乙酰胺(DCAcAm)和三乙酰胺(TCAcAm)的分析方法.考察了GC/MS和GC/ECD两种检测仪器及不同样品前处理技术对氯代乙酰胺(CAcAms)的检测效果.对比发现,酸催化水解+GC/ECD的分析方法容易受其它消毒副产物(DBPs)的影响,直接液液萃取(LLE)+GC/MS更适合CAcAms的分析;乙酸乙酯(ETAC)的萃取效果优于DBPs分析常用萃取剂甲基叔丁基醚(MTBE).在选定条件下,DAcAm和TAcAm在10～1000 μg/L的范围内线性关系良好,r＞0.9995; 方法回收率在82.0%～111.9%之间;RSD小于10%;检出限(MDL)和测定限(RQL)均低于1 μg/L.     

Construction of Recycling Photocatalytic Gels for the Disinfection of Pathogens and Degradation of Organic Pollutants

Bismuth oxybromide (BiOBr) nanosheets are exciting photocatalysts for microbial disinfection and organic dye degradation. However, it remains a great challenge to easily recycle these nanomaterials and improve their photocatalytic ability. Herein, we constructed a novel photocatalytic BiOBr@PAG gel containing BiOBr nanosheets and polyacrylamide gel (PAG), based on peroxydisulfate-induced polymerization reaction. The photocatalytic gel had equally distribution of BiOBr nanosheets on the surface, and could be easily recycled from water. More strikingly, the gel could also rapidly kill all tested pathogenic bacteria (i. e., Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus) under irradiation. Its disinfection activity is attributed to remarkable intracellular ROS production and oxidative cell damage. Furthermore, the gel had higher photocatalytic activity than BiOBr nanosheets alone during degradation of organic dyes. This study developed a novel strategy for preparation of easy-recycling and high-efficiency photocatalytic systems for practical application in environmental treatment and medicinal disinfection.