酚醛型吸附树脂对水体系中吡啶和N,N-二甲基苯胺的吸附性能研究

研究了酚醛型吸附树脂在水体系中对吡啶和N，N-二甲基苯胺的静态和动态吸附行为．结果表明，在水中树脂对吡啶和N，N-二甲基苯胺的吸附主要以疏水吸附机理进行；吸附吡啶和N．N-二甲基苯胺的初始阶段，即达到38．3～48．9％平衡吸附时，吸附速率数据和半经验速率方程很吻合：酚醛型吸附树脂等温吸附吡啶和N，N-二甲基苯胺的平衡吸附数据符合Langmuir方程，相关系数在0．99以上，酚醛型吸附树脂吸附吡啶和N，N-二甲基苯胺属单分子层吸附：用80％的乙醇溶液作洗脱剂来洗脱吸附吡啶已达饱和的JDW-2树脂，效果是很理想的．在3．6个床体积内洗脱率达91．52％，4．8个床体积内洗脱率达到94．85％。表明酚醛型吸附树脂具有优良的洗脱性能．     

新型固液双重致孔球形离子交换剂的制备及其性能研究

以甲基丙烯酸缩水甘油酯为单体 ,采用固液联合致孔方式 ,通过一步悬浮聚合制备了一种新型双孔高分子球形载体 .经化学修饰后 ,得到含二乙胺羟丙基的阴离子交换剂 (介质A) .优化了制备条件 .并与用相同方法制备的但仅含有机溶剂致孔剂的介质B进行了比较 .介质A和B均具有较高的静态吸附容量和机械强度 .由于介质A内含有流动相可以对流通过的大孔 ,因此其动态吸附容量远高于介质B ,并且在较高的流速下表现出较好的色谱流动性能     

Adsorption of poly(ethylene glycol)s on mercury/aqueous solution interface 1. Kinetics of PEG 8000 adsorption

In order to study the influence of the adsorption of fulvic compounds on voltammetric signals and to understand better the adsorption of these compounds on hydrophobic natural water interfaces, adsorption studies of macromolecules such as poly(ethylene glycol) (HO(CH₂CH₂O)_n) with molecular weight of 8000 were done on the mercury/water interface by a.c. voltammetry at the potential of zero charge. The maximum surface concentration, adsorption equilibrium constant and adsorption rate constant have been determined from the global adsorption mechanism, controlled by two determining steps: diffusion and kinetics of adsorption at the interface.     

Isothermal titration calorimetric studies of surfactant interactions with negatively charged, ‘hairy’ latex nanoparticles

Isothermal titration calorimetry (ITC) measurements of the mixture of the cationic surfactant cetyl trimethyl ammonium bromide (CTAB) with negatively charged, hairy copolymer latices (poly-(2,3-epoxypropylmethacrylate-co-methacrylic acid) in different ratio) at high water excess indicate a monomer adsorption mechanism of CTAB by the polymer particles. The number of adsorbed CTAB molecules at saturation corresponds approximately to the number of negative elementary charges bound at the surface of the latices. The mixing enthalpy is the sum of demicellization and sorption enthalpies. At 25 °C for CTAB the demicellization enthalpy amounts to 10 kJ/mol, whereas the adsorption enthalpy varies from –7 kJ/mol (surface charge density of the latices =–0.37 C/m²) to +3 kJ/mol (=–0.085 C/m²). The hydrodynamic radius R_H of the latex particles upon titration of cationic detergent and salt (NaBr) decreases by about 2 nm until the onset of aggregation near the isoelectric point. Titration of nonionic or anionic detergents has much less influence on the hydrodynamic radius and produces no measurable adsorption heat. The results are consistent within a model of latex particles with extended negatively charged polymer chains interacting predominantly via Coulombic forces with detergents.     

醋酸十二铵的吸附和SiO2悬浮液的稳定性

（1）测定了醋酸十二烷基铵（DAA）在CAB－O－SIL上的吸附，其等温线属双平台或LS型[1－3，5]；（2）NaCl的存在使DAA的吸附增加．但不影响其低浓度下第一平台的吸附量；HCl的存在则在全浓度范围内抑制了DAA的吸附，（3）测定了CAB－O－SIL颗粒在上述各溶液中的悬浮液的稳定性；（4）根据表面形成小胶团的吸附理论（即二步模型产）[2，3，5，]，并借助电导跟踪溶液中发生的变化，满意地解释了吸附和聚沉的实验结果．     

笼形聚偕胺肟树脂的研究HX／ACAO树脂吸附贵金属

氢卤酸、硝酸、硫酸、磷酸和硼酸处理的笼形聚偕胺肟树脂（ＨＸ／Ａ－ＣＡＯ）对Ａｇ＋和等贵金属离子的吸附能力按如下顺序：ＰｄＣｌ４２－：Ｈ３ＢＯ３／ＡＣＡＯ＞ＢＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ．ＩｒＣｌ６２－：ＢＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ≥ＨＮＯ３／ＡＣＡＯ．ＰｔＣｌ６２：ＢＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ．Ａｇ＋：ＢＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ．ＡｕＣｌ４－：ＢＣＡＯ＞Ｈ３ＢＯ３＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＣｌ／Ａ－ＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞ＨＮＯ３／Ａ－ＣＡＯ．研究了Ｈ３ＢＯ３／ＡＣＡＯ树脂对Ａｇ＋和离子的吸附动力学，讨论了吸附机理．     

Prediction of adsorption of organic component and water vapour mixture onto activated carbon

A simple isotherm equation is derived for the adsorption of an organic component onto activated carbon in presence of water vapour. The theoretical results are compared with experimental data for toluene-water vapour-activated carbon, which were published byRipperger andGermerdonk [10].

---

Vorhersage der Adsorption einer organischen Komponente und Wasserdampf an Aktivkohle

Zusammenfassung Es wird eine einfache Adsorptionsisotherme abgeleitet, welche die gleichzeitige Adsorption eines organischen Stoffes und Wasser an Aktivkohle beschreibt. Die theoretischen Ergebnisse werden mit experimentellen Resultaten vonRipperger undGermerdonk [10] für Toluol-Wasser-Aktivkohle verglichen.

---

Symbols a _i adsorbate concentration in adsorbent, kg/kg of carbon - a _0i monolayer capacity, kg/kg of carbon - b _i kinetic parameter of theLangmuir equation - E _j adsorption energy in thej-th layer - i i-th component (1 — water vapour, 2 — organic compound) - j j-th layer - m number of layers - n number of adsorbed components - p partial pressure, Pa - p* saturation partial pressure, Pa - p _C water vapour partial pressure at begining of capillary condensation, Pa - surface coverage     

CZE separations of basic proteins at low pH in fused silica capillaries with surfaces modified by silane derivatization and/or adsorption of polar polymers

Mixtures of several basic proteins have been used to test CZE capillaries with surfaces modified by new pretreatment procedures; the performance obtained has been compared with that achieved using capillaries treated by procedures described in the literature. It has been shown that addition of non-ionic polyvinylalcohols (PVA) to CZE buffer solutions deactivates even bare, i.e. untreated, fused silica surfaces and renders them suitable for separations of basic proteins. The performance obtained from such surfaces was comparable with that of capillaries modified by the more elaborate procedures of etching, silanol derivatization, and/or adsorptive coating (again with polymers). A home-made device is described which enables derivatization and coating reactions to be performed on fused silica capillaries under an inert atmosphere, i.e. one free from oxygen and water.     

Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.