GRAFT COPOLYMERIZATION OF METHYL ACRYLATE ONTO CHITOSAN INITIATED BY POTASSIUM DIPERIODATONICKELATE (IV)

ABSTRACT

A novel redox system, potassium diperiodatonickelate [Ni (IV)]‐chitosan, was employed to initiate the graft copolymerization of methyl acrylate (MA) onto chitosan in alkali aqueous solution. The effects of reaction variables such as monomer concentration, initiator concentration, reaction time, pH and temperature were determined. By means of a series of copolymerization, the grafting conditions were optimized. The maximum grafting percentage obtained was 404.1% when 0.3 g chitosan was copolymerized with 1.8 mL monomer at 35°C for 5 hours with [Ni (IV)]=9.4×10^?4 M and the total volume was 20 mL. Ni (IV)-chitosan system is found to be an efficient redox initiator for this graft copolymerization. A single electron transfer mechanism is proposed to explain the formation of radicals and the initiation. The grafted copolymers were characterized by IR and X-ray diffraction diagrams. The thermal stability of chitosan and chitosan-g-PMA was studied by thermogravimetric analysis (TGA).     

A review on environmental applications of chitosan biopolymeric hydrogel based composites

Abstract

Chitosan (CS) is being used for fabrication of low cost, biocompatible materials that have applicability in fields such as agriculture, biotechnology and environment. In Environmental research, one of the applications of CS based hydrogel composites are in form of biosorbents for eviction of toxic dyes, heavy metals and nutrients from effluent streams. The adsorption potential could be attributed to the reactive functional groups existing on the surface of CS. CS based materials can also be employed for oil/water separation, as a fertilizer carrier, in Microbial fuel cells as Electrolyte membrane and as Electrochemical/Biosensors for detecting and analyzing few environmental pollutants such as pesticides. The earlier review papers on the subject matter have concentrated mainly on dye and heavy metal removal without giving details of its utility in the field of electrochemistry and agriculture. Though the biopolymer holds numerous applications, it has not been discussed extensively. Thus, an attempt has been made to elucidate the current and potential applications of CS hydrogels and composites based on the efficacy it has shown in areas of removal of organic and inorganic contaminants such as dyes, heavy metals and nutrients, in agriculture, oil and water separation, Microbial Fuel cells and Electrochemical/Biosensors.

• HIGHLIGHTS

• Chitosan based hydrogel composites could be extensively used in the field of Environment Technology.

• The composites act as effective biosorbents for dye, heavy metal and nutrient removal because of the functional groups present on Chitosan’s surface.

• These can also be effectively used for oil/water separation and also as a fertilizer/pesticide carrier for their slow release.

• Chitosan based electrolytes can become a promising ecofriendly substitute for synthetic polymers in fuel cells.

• These biopolymers have also been researched upon as electrochemical/biosensors in recent years for detecting environmental pollutants.

     

Chitosan-DNA Particles for DNA Delivery: Effect of Chitosan Molecular Weight on Formation and Release Characteristics

Novel DNA-chitosan particles were prepared based on associative phase separation and interfacial diffusion. These particles formed at water/water emulsion type interfaces were characterized with respect to several properties including stability, DNA conformational state, and entrapment and release of DNA. In particular it was found that the chitosan molecular weight is a good controlling parameter.     

Swelling and Reswelling Characteristics of Cross-Linked Poly(vinyl alcohol)/Chitosan Hydrogel Film

Poly(vinyl alcohol) (PVA), hydrogel was prepared by using glutaraldehyde as a cross-linking agent. The blend semi-synthetic hydrogel film, consisting of PVA and chitosan, was prepared from a solvent-casting technique and characterized for their intermolecular interactions using infrared method. The swelling and reswelling behaviors, as well as mechanical properties of the synthetic and semi-synthetic gels were examined by weighing and tensile testing, respectively. Cross-linking the two types of polymer with glutaraldehyde produces a film with lower crystallinity and smaller swelling and reswelling degrees, but having improved mechanical properties. Also, the two types of films show a pH-dependent swelling characteristic. It was found that, the reswelling properties of synthetic hydrogels can be improved by blending PVA with certain ratio of natural polymer. This blending film, can be improve sandy soil properties for cultivation, such as, controlled release of water.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.     

基于Diels-Alder点击反应构建壳聚糖-O-聚乙二醇接枝共聚物

通过Diels-Alder(D-A)反应,合成了具有规整化学结构的接枝共聚物,壳聚糖-O-聚乙二醇(CS-O-PEG).D-A反应所需双烯体(呋喃环)通过糠基硫醇与端甲基丙烯酸酯聚乙二醇之间的巯基-丙烯酸酯(thio-acrylate)反应合成得到;马来酰亚胺基丙酸通过活泼酯法偶联到十二烷基硫酸钠-壳聚糖复合物(SCC)羟基上,从而获得亲双烯体.采用红外光谱(FTIR)和核磁共振(1H-NMR)表征了中间产物与最终产物的结构,并用原位核磁监测D-A反应及其逆反应过程.结果表明,聚乙二醇双烯体可在水介质中温和条件下定量接枝到壳聚糖羟基上,反应具有点击特征;同时,聚乙二醇与壳聚糖之间的连接键在高温下(90℃)可通过D-A逆反应而发生断裂.     

Simultaneous determination of ten organophosphate pesticide residues in fruits by gas chromatography coupled with magnetic separation

In this study, γ‐Fe₂O₃/chitosan magnetic microspheres were synthesized and evaluated by X‐ray diffraction, SEM, thermogravimetric analysis, and static and kinetic adsorption experiments. Results showed that the magnetic microspheres exhibited good adsorption ability, and offered fast kinetics for the adsorption of trichlorfon, methamidophos, malathion, methyl parathion, dimethoate, omethoate, phosphamidon, phorate, isocarbophos, and chlorpyrifos. Based on magnetic separation, a simple method of magnetic SPE coupled to GC for the simultaneous determination of ten trace organophosphate pesticide residues was developed. Under the optimal conditions, the enrichment factor for ten organophosphorus pesticides was 10.1–364.7 and linear range was 0.001–10.0 mg/L. The LOD (S/N = 3) of the method for the ten pesticides was 0.31–3.59 μg/kg. The RSD for three replicate extractions of spiked samples was between 2.5 and 6.3%. The pear and apple samples spiked with ten organophosphate pesticides at 20 and 200 μg/kg levels were extracted and determined by this method with good recoveries ranging from 79.9 to 98.7%. Moreover, the method has been successfully applied for the determination of the ten organophosphate pesticide residues in peach samples.     

Characterization and in vitro release kinetics of chitosan based biocomposites from Scotch Bonnets

The main aim of this study is to formulate the combination of the bioactive composite containing chitosan/β -tricalcium phosphate (CH/β-TCP) as potential drug delivery platforms for the sustained release of antibiotics. Herein the mode of amoxicillin (AMX) maintained in the β-TCP/chitosan composite was characterized using XRD, FT-IR to confirm the phase purity and functional groups. SEM was used to examine the size and shape of particles. The SEM images of the biocomposites after drug release confirmed that they are biodegradable. In vitro drug release experiments in PBS (pH 7.4) revealed a sustained release profile in a neutral medium. Drug release profiles were evaluated according to five different kinetic models including Zero Order, First Order, Higuchi, Hixon Crowel, and Korsmeyer-Peppas. The release profile was best expressed by the Korsmeyer Peppas model because the results showed high linearity. Overall, the positive effect of chitosan coating on the drug elution profile of β-TCP as carriers for the controlled delivery of antibiotics was regarded as biocompatible for the controlled drug delivery system.     

L-Glutamic acid loaded collagen chitosan composite scaffold as regenerative medicine for the accelerated healing of diabetic wounds

Diabetic wounds (DWs) are characterized by prolonged inflammation, which poses a significant challenge for clinicians and researchers to promote healing. In this study, we fabricate L-Glutamic acid (LGA) loaded collagen/chitosan (COL-CS) composite scaffold for the accelerated healing of DW. The characterization outcomes of the composite scaffold revealed that a crosslinked scaffold holds optimum porosity, low matrix degradation, and sustained drug release in contrast to a non-crosslinked scaffold. In vitro, LGA composite scaffolds have not exhibited any toxicity on 3T3L1 cell lines. In vivo, the LGA composite scaffold has shown significantly (p < 0.001), higher rates of wound contraction than those in control and COL-CS scaffold treated groups. In addition, MMP-9 levels were also significantly reduced in LGA composite scaffold-treated group compared with those in the control and COL-CS scaffold treated group. Thus, the LGA composite scaffold may serve as a promising therapy in DW due to its unique modulatory effect on inflammatory biomarker MMP-9.     

Control of pore environment in highly porous carbon materials for C2H6/C2H4 separation with exceptional ethane uptake

Adsorptive separation of C₂H₆ from C₂H₄ by adsorbents is an energy-efficient and promising method to boost the polymer grades C₂H₄ production. However, that C₂H₆ and C₂H₄ display very similar physical properties, making their separation extremely challenging. In this work, by regulating the pore environment in a family of chitosan-based carbon materials (C-CTS-1, C-CTS-2, C-CTS-4, and C-CTS-6)- we target ultrahigh C₂H₆ uptake and C₂H₆/C₂H₄ separation, which exceeds most benchmark carbon materials. Explicitly, the C₂H₆ uptake of C-CTS-2 (166 cm³/g at 100 kPa and 298 K) has the second-highest adsorption capacity among all the porous materials. In addition, C-CTS-2 gives C₂H₆/C₂H₄ selectivity of 1.75 toward a 1:15 mixture of C₂H₆/C₂H₄. Notably, the adsorption enthalpies for C₂H₆ in C-CTS-2 are low (21.3 kJ/mol), which will facilitate regeneration in mild conditions. Furthermore, C₂H₆/C₂H₄ separation performance was confirmed by binary breakthrough experiments. Under different ethane/ethylene ratios, C-CTS-X extracts a low ethane concentration from an ethane/ethylene mixture and produces high-purity C₂H₄ in one step. Spectroscopic measurement and diffraction analysis provide critical insight into the adsorption/separation mechanism. The nitrogen functional groups on the surface play a vital role in improving C₂H₆/C₂H₄ selectivity, and the adsorption capacities depend on the pore size and micropore volume. Moreover, these robust porous materials exhibit outstanding stability (up to 800 °C) and can be easily prepared on a large scale (kg) at a low cost (～$26 per kg), which is very significant for potential industrial applications.