流动注射化学发光法测定溶菌酶含量

基于溶菌酶催化水解壳聚糖的产物氨基葡萄糖,与金溶胶-鲁米诺可产生很强的化学发光,建立了流动注射化学发光测定溶菌酶含量的方法.对水解和化学发光反应条件进行了考察.结果表明,pH 4.0、50 ℃水解5h为最佳水解条件.在金胶、鲁米诺及NaOH的浓度分别为0.05,0.05和10 mmol/L条件下,化学发光检测效果最好....     

Protein delivery based on uncoated and chitosan-coated mesoporous silicon microparticles

Mesoporous silicon is a biocompatible, biodegradable material that is receiving increased attention for pharmaceutical applications due to its extensive specific surface. This feature enables to load a variety of drugs in mesoporous silicon devices by simple adsorption-based procedures. In this work, we have addressed the fabrication and characterization of two new mesoporous silicon devices prepared by electrochemistry and intended for protein delivery, namely: (i) mesoporous silicon microparticles and (ii) chitosan-coated mesoporous silicon microparticles. Both carriers were investigated for their capacity to load a therapeutic protein (insulin) and a model antigen (bovine serum albumin) by adsorption. Our results show that mesoporous silicon microparticles prepared by electrochemical methods present moderate affinity for insulin and high affinity for albumin. However, mesoporous silicon presents an extensive capacity to load both proteins, leading to systems were protein could represent the major mass fraction of the formulation. The possibility to form a chitosan coating on the microparticles surface was confirmed both qualitatively by atomic force microscopy and quantitatively by a colorimetric method. Mesoporous silicon microparticles with mean pore size of 35 nm released the loaded insulin quickly, but not instantaneously. This profile could be slowed to a certain extent by the chitosan coating modification. With their high protein loading, their capacity to provide a controlled release of insulin over a period of 60-90 min, and the potential mucoadhesive effect of the chitosan coating, these composite devices comprise several features that render them interesting candidates as transmucosal protein delivery systems.     

Improved cellular response on multiwalled carbon nanotube-incorporated electrospun polyvinyl alcohol/chitosan nanofibrous scaffolds

We report the fabrication of multiwalled carbon nanotube (MWCNT)-incorporated electrospun polyvinyl alcohol (PVA)/chitosan (CS) nanofibers with improved cellular response for potential tissue engineering applications. In this study, smooth and uniform PVA/CS and PVA/CS/MWCNTs nanofibers with water stability were formed by electrospinning, followed by crosslinking with glutaraldehyde vapor. The morphology, structure, and mechanical properties of the formed electrospun fibrous mats were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and mechanical testing, respectively. We showed that the incorporation of MWCNTs did not appreciably affect the morphology of the PVA/CS nanofibers; importantly the protein adsorption ability of the nanofibers was significantly improved. In vitro cell culture of mouse fibroblasts (L929) seeded onto the electrospun scaffolds showed that the incorporation of MWCNTs into the PVA/CS nanofibers significantly promoted cell proliferation. Results from this study hence suggest that MWCNT-incorporated PVA/CS nanofibrous scaffolds with small diameters (around 160 nm) and high porosity can mimic the natural extracellular matrix well, and potentially provide many possibilities for applications in the fields of tissue engineering and regenerative medicine.     

Stimuli-responsive multilayer chitosan hollow microspheres via layer-by-layer assembly

Novel stimuli-responsive multilayer chitosan hollow microspheres with chitosan as the unique component have been fabricated by the sequential layer-by-layer electrostatic assembly technique from the sacrificial templates (polystyrene sulfonate, PSS) with chitosan (CS) as the polycation and carboxymethyl chitosan (CMCS) as the polyanion, respectively. Their hollow structure was confirmed by the TEM analysis. The DLS analysis indicated that the multilayer chitosan microcapsules were pH and ionic strength dual-responsive. Due to the biocompatibility of the single component chitosan used, the multilayer chitosan microcapsules are expected to be used in the controlled release of drugs.     

Chitosan functionalized with di-2-propanolamine: Its application as solid phase extractant for the determination of germanium in water samples by ICP-MS

Cross-linked chitosan was chemically modified with di-2-propanolamine via an arm of chloromethyloxirane (CCTS-DPA resin). The adsorption behavior of the resin towards 62 elements was examined using a mini-column pretreatment method, and the collected elements were eluted with 1 mol L^− 1 nitric acid before measurement by inductively coupled plasma-mass spectrometry (ICP-MS).The CCTS-DPA resin can adsorb several metal cations and several oxoanionic elements at appropriate pH. However, di-2-propanolamine (DPA) attached to cross-linked chitosan (CCTS) showed excellent ability and selectivity for the adsorption of germanium at pH 6 to 9. The adsorption capacity of the resin for germanium (IV) was found to be 106 mg g^− 1 resin, whereas the adsorption rate constant was 9.82 × 10^− 2 min^− 1. Through the column treatment, alkali and alkaline earth matrices in river water and seawater matrices could be completely removed. The resin can also successfully remove chloride and selenium that can interfere with the direct determination of germanium by ICP-MS. The applicability of the CCTS-DPA resin was further demonstrated for the collection/preconcentration of germanium in environmental water samples and its determination by ICP-MS. The concentrations of germanium in tap water, river water and seawater samples were found in the range of 0.011 to 0.022 μg L^− 1.     

One step electrochemically deposited nanocomposite film of chitosan-carbon nanotubes-gold nanoparticles for carcinoembryonic antigen immunosensor application

A simple and controllable one-step electrodeposition method for the preparation of a chitosan-carbon nanotubes-gold nanoparticles (CS-CNTs-GNPs) nanocomposite film was used to fabricate an immunosensor for detection of carcinoembryonic antigen (CEA). The porous three-dimensional CS-CNTs-GNPs nanocomposite film, which offered a large specific surface area for immobilization of antibodies, exhibited improved conductivity, high stability and good biocompatibility. The morphology of the formed nanocomposite film was investigated by scanning electron microscopy (SEM), and the electrochemical behaviors of the immunosensor were characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Under the optimal conditions, the proposed immunosensor could detect CEA in two linear ranges from 0.1 to 2.0 ng mL⁻¹ and from 2.0 to 200.0 ng mL⁻¹, with a detection limit of 0.04 ng mL⁻¹. The immunosensor based on CS-CNTs-GNPs nanocomposite film as the antibody immobilization matrix could exhibit good sensitivity, stability, and reproducibility for the determination of CEA.     

Adsorption of graphene oxide/chitosan porous materials for metal ions

Porous graphene oxide/chitosan（PGOC） materials were prepared by a unidirectional freeze-drying method.Their porous structure,mechanical property and adsorption for metal ions were investigated.The results show that the incorporation of graphene oxide（GO） significantly increased the compressive strength of the PGOC materials.The saturated adsorption capacity of Pb²⁺ increased about 31%,up to 99 mg/g when 5 wt%GO was incorporated These biodegradable,nontoxic,efficient PGOC materials will be a potential adsorbent for metal ions in aqueous solution.     

Fluoride removal from water by chitosan derivatives and composites: A review

Fluoride is an essential element, indispensable for maintenance of dental health. Nevertheless, fluoride concentrations in drinking water above 1.5 mg L⁻¹ may be detrimental to human health. Many methods have been developed for removing excessive fluoride from drinking water, adsorption seems to be an effective, environmentally friendly and economical one. Since the sorption capacity of fluoride below 2 mg L⁻¹ on most conventional adsorbents is not satisfactory, much effort has been devoted to develop new and cost-effective fluoride adsorbents. This review reports the recent developments in the F⁻ removal in water treatment, using chitosan derivatives and composites in order to provide useful information about the different technologies. When possibly the adsorption capacity of chitosan derivatives and composites under different experimental conditions is reported to help to compare the efficacy of the fluoride removal process. A comparison with the adsorption capacity of other low cost adsorbents is also tabled.     

Adsorption of acid yellow dye on flakes of chitosan prepared from fishery wastes

Chitosan flakes, extracted from prawns and labeo rohita scales, with high adsorption capacity were prepared after chemical treatment and were used to remove acid yellow dye from water. The results showed that adsorption capacity is dependent on pH, initial concentration of dye, BET, Langmuir surface area and pore volume of the adsorbent. In acidic conditions, the polymer amino groups were protonated (positively charged polymer chain), which showed attraction with negative ions of anionic dye. Chitosan from prawns scales showed higher dye adsorption under the same experimental conditions. Adsorption isotherms were developed and equilibrium data fitted well to Langmuir and Freundlich isotherm models.     

Electrochemical behaviour of platinum at polymer-modified glassy carbon electrodes

In this paper, the preparations and voltammetric characteristics of chitosan-modified glassy carbon (Ct-MGC) and platinum electrodes are studied. Ct-MGC can be used for pre-concentration and quantification of trace amounts of platinum in solution. At low pH medium, the complex of Pt with protonated group-NH³⁺ in the chitosan molecule has been confirmed by FT-IR spectra studies.