Improved quantification limits in chiral capillary electrochromatography by peak compression effects

The peak compression effect has been applied to improve quantification limits in chiral capillary electrochromatography (CEC). A stationary phase based on the chiral selector vancomycin (Chirobiotic V) was used for separations of the enantiomers of mianserin. By adding solvents with a low dielectric constant, e.g. 2-propanol or tetrahydrofuran, to the sample solution, peak compression could be induced. The plate numbers for the minor enantiomer increased from approximately 100,000 to 1.4-1.6 million plates/m, when the composition of the mobile phase was adjusted so that the analyte eluted within either one of two system zones originating from the sample solution. A 10-fold improvement in the quantification limit for the minor enantiomer was obtained compared to elution under non-focused conditions.     

Water‐Soluble N‐(n‐Fatty acyl)chitosans

Chitosan was partially N‐acylated by treatment with n‐fatty acid anhydrides in a homogeneous solution in 2 vol.‐% aqueous acetic acid‐methanol (1:2 v/v). The degree of substitution (d.s.) for N‐acyl groups in the water‐soluble N‐acylchitosan derivatives was in the range of 0.42–0.82 for N‐acetyl, 0.37–0.76 for N‐propionyl, 0.52–0.71 for N‐butyryl and 0.54–0.64 for N‐pentanoyl and ca. 0.58 for N‐hexanoyl, respectively.

Water soluble N‐(n‐fatty acyl)chitosans.     

Determination of metoprolol enantiomers in human urine by GC-MS using (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride as a chiral derivatizing agent

Summary A method for the assay of R-(+)- and S-(−)- metoprolol in human urine has been developed using gas chromatography-mass spectrometry. The method involved purification by liquid-liquid extraction and derivatization with N-methyl-N-(trimethylsilyl)trifluoroacetamide to form an O-silyl ether, followed by subsequent chiral derivatization with (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride to form diastereomeric amide. The reaction was rapid and the diastereomeric derivatives were well resolved. Quantitation was performed by selected-ion monitoring of fragment ions of the diastereomers in electron impact ionization mode. No racemization was found during the reaction. The detection limit was 0.5 ng·mL⁻¹. The intra-day variation ranged between 0.38 and 7.86% in relation to the measured concentration and inter-day variation was 2.26–8.06%. The method has been applied to the determination of R-(+)-and S-(−)- metoprolol in human urine from healthy volunteers dosed with racemic metoprolol tartrate.     

Reaction of 2,6-dibenzylidenecyclohexanone with phosphorus pentachloride: Triple functionalization of the isosemiquinoid system

The reaction of 2,6-dibenzylidenecyclohexanone with PCl₅ occursvia the sequential stages of desoxychlorination and substitutional phosphorylation to form (after oxidation, methoxylation, and hydrolysis on the surface of the chromatographic SiO₂ adsorbent) organophosphorus products of the 1-(a-chloro-, a-hydroxy-, or -alkoxy)benzyl-2-chloro-3-(-(dimethylphosphoryl)benzylidene)cyclobex-1-ene series.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 441–443, February, 1996.     

Catalytic enantioselective allylation of aldehydes via a moisture-tolerant chiral BINOL-In(III) complex

A moisture-tolerant chiral indium complex has been developed to effect good enantioselectivities in the addition of allyltributylstannanes to aldehydes. The allylation of a variety of aromatic, α,β-unsaturated and aliphatic aldehydes resulted in both moderate to good yields and high enantioselectivities (up to 86% ee).     

Chiral Phosphinophenyloxazolines Bearing Alkoxymethyl Substituents: Synthesis and Application in the Palladium Catalyzed Allylic Substitution Reactions

The chiral phosphine‐oxazoline ligands 3 and 4 bearing 4‐alkoxymethyl substituents on the oxazoline ring with (R)‐configuration were prepared from L‐serine methyl ester in 66% and 33% yields, respectively. Along this synthetic pathway, the β‐hydroxylamides derived from L‐serine methyl ester and 2‐halobenzoyl chlorides were expediently converted to the corresponding oxazolines by using diethylaminosulfur trifluoride as the activation agent. Potassium diphenylphosphide was the reagent of choice for replacing the bromine atom on the phenyl ring, giving the desired oxazoline‐phosphine ligands 3 and 4 . Together with [Pd(η³‐allyl)Cl]₂, ligands 3 and 4 induced an enantioselective allylic substitution reaction of 1,3‐diphenyl‐2‐pro‐penyl acetate by dimethyl malonate. Although ligands 3 and 4 exhibit the (R)‐configuration, differing from the (S)‐configuration of Pfaltz‐Helmchen‐Williams phosphine‐oxazoline ligands, all these ligands led to the same enantiotopic preference in the allylic substitution reaction. To facilitate the recovery and reuse of the phosphine‐oxazoline ligand, immobilization on Merrifield resin was attempted, albeit in low loading.     

Optimisation of the chlorthalidone chiral separation by capillary electrochromatography using an achiral stationary phase and cyclodextrin in the mobile phase

The separation of chlorthalidone enantiomers in capillary electrochromatography on an achiral stationary phase when adding a chiral selector, hydroxypropyl-β-cyclodextrin, to the mobile phase, was optimised. The goal was to investigate the feasibility of modelling retention times and resolution when during the optimisation procedure regular replacement of columns is required due to their fragility. Therefore, it is essential that the packing procedure delivers reproducible columns. The optimisation of an existing chlorthalidone separation was chosen as case study. The influence of two factors, chiral selector concentration and organic modifier content, on the responses was modelled. The experiments performed prior to modelling were defined by a central composite design. Results on different columns, obtained under identical experimental conditions, were found comparable and thus modelling was possible in situations where several columns were required to complete a design. A second-order polynomial model was built for both responses. Optimal separations were also predicted using Derringer’s desirability functions. The optimum was found at 33 mM cyclodextrin and 16% (v/v) acetonitrile on two types of columns (with different packing times) leading to a strong reduction in analysis time for an equally good separation compared to the initial conditions. Measured and predicted responses were found comparable, indicating that acceptable models were obtained.     

DiastereoselectiveandEnantioselectiveSynthesisof(1S,2S)-2-Ethyl-1-aminocyclopropaneCarboxylicAcid

During the last decade, 1-aminocyclopropanecarboxylic acid and its derivatives (ACCS) have attracted increasing attention of organic and bioorganic chemists due to their outstanding biological properties, ranging from antimicrobial, insecticidal, plant growth and fruit ripening controls, etc.1. Moreover, the three-membered carbocycle provides building blocks of unprecedented synthetic potential because it undergoes selective ring opening, ring enlargement or cycloaddition reactions2. The mo…     

A unique reversal of elution order during direct enantiomeric resolution of amide derivatives of 1-phenyl-2-aminopropane by high performance liquid chromatography on chiral stationary phases

Enantiomeric amide derivatives of (S)- and (R)-1-phenyl-2-aminopropane (dextro- and levoamphetamine, respectively) were resolved by high performance liquid chromatography on commercially available ionically and covalently bonded chiral stationary phases ((R)-N-(3,5-dinitrobenzoyl)phenylglycine). Ten enantiomeric amide pairs were synthesized and chromatographed on the columns by using a mobile phase of hexane-isopropanol (97 : 3), a flow rate of 2 ml/min, and a column temperature of 20°C. The (R)-isomer of all 10 amides eluted first on the covalent column as did the (R)-isomer of nine derivatives on the ionic column. however, the 3,5-dinitrobenzoyl amide of (S)- amphetamine eluted before the (R)-isomer on the ionic column. This reversal in enantiomeric elution order reveals the complexity of the interactions occurring on these columns and emphasizes the hazards of relying on observed elution order as an a priori indication of absolute configuration.     

Chromatographic evaluation of perphenylcarbamoylated β-cyclodextrin bonded stationary phase for micro-high performance liquid chromatography and pressurized capillary electrochromatography

Application of mono (6^A-N-ethylenediamine-6^A-deoxy) perphenylcarbamoylated β-cyclodextrin (β-CD) bonded stationary phase (CSP) in micro-high performance liquid chromatography (micro-HPLC) and pressurized capillary electrochromatography (p-CEC) was firstly presented. A series of racemic α-amidophosphonates were resolved in reversed- and normal-phase modes on this CSP. The investigated chromatographic parameters include retention factor (k′), separation factor (α) and resolution (Rs) of solutes. In addition, the structural variation of the solutes and the experimental factors affecting chiral separations have been examined, including the percentage of alcohol modifier, the linear velocity (u) of the mobile phase, electrical field strength, etc. Baseline separation was achieved for most of the entities. Hydrophobic interaction, steric effect and π-π interaction contribute to the possible mechanism. Comparative results indicate that higher Rs value up to 3.1 was found in micro-HPLC, higher efficiency up to 29,970 in p-CEC.