As(Ⅲ)-Cu(Ⅱ)协同抑制鲁米诺-MnO_4~-化学发光反应的研究及其应用

本文报道了As(Ⅲ)-Cu(Ⅲ)两种离子对鲁米诺-MnO_4~-化学发光反应的协同抑制作用,据此拟定了测定微量As(Ⅲ)的化学发光新方法。该法灵敏度较高,检测限为6.8×10~(-9)g/ml As(Ⅲ),选择性也较好,同时线性范围宽(7.0×10~(-9)～3.0×10~(-6)g/ml),测定手续简便。应用本法测定工业废水中的As(Ⅲ),结果满意。     

On-chip potential gradient detection with a portable capillary electrophoresis system

A portable chip-CE system with potential gradient detection (PGD) was developed and applied to the determinations of alkali metals and alkaloids. The separation efficiency appeared to be satisfactory and nonaqueous capillary electrophoresis (NACE) proved to be applicable to PGD or conductivity detection. The power supplies, separation and detection were built on a device of 3 kg in weight. A branch channel near the end of the separation channel was designed to perform PGD and make the application of relatively high field strength possible. The study is the first report on the application of PGD on the microchip platform. The design of the chip-CE system shows several advantages, such as simplicity, miniaturization and wide applicability.     

对NO生理作用的新认识及其电化学实时检测

本文综述了近年来学术界对ＮＯ生理作用的新认识，并介绍了现场实时检测生物活体中释放的ＮＯ浓度的电化学方法．     

化学发光消耗型锰传感器

化学和生物发光是由化学反应产生的一种光辐射,不需要任何光源。又由于它们具有高灵敏度、宽线性范围和相对比较便宜的仪器等优点,因而在化学和生物传感器领域引起了广泛的兴趣。已用于H_2O_2、乳酸和胆固醇等多种生物活性物质的测定,但未见有金属离子传感器的报道。本文发展了一种新型的全固态模式的消耗型锰离子化学发光传感器。该传感器将除待测物外的所有化学发光反应试剂全部固定在阴离子交换树脂Amberlyst A-27上,于化学发光反应之前,将一定量化学发光试剂从固定化试剂柱上洗脱,与样品中的锰离子产生化学发光。已成功地应用于水样中痕量锰离子的测定。每个固定化试剂柱可连续使用100次以上。 1 实验部分 1.1 仪器和试剂 化学发光传感器由流动系统和检测系统两部分组成。其中流动系统主要由蠕动泵、六通阀、固定化试剂柱和流通池组成。检测系统由光电信增管、负高压、放大器和记录仪组成(图1)。     

奋乃静和氟奋乃静的毛细管电泳柱端喷壁式安培检测

应用自组装毛细管电泳．安培检测装置，建立了同时分离检测抗精神病药奋乃静与氟奋乃静的新方法。在1050mV(vs．Ag／AgCl)检测电位下，奋乃静与氟奋乃静的检出限分别达0．060mg／L与0．075mg／L。在最佳检测条件下，两组分的响应电流与浓度之间有着良好的线性关系，线性范围为0．75～75mg／L。将方法用于药物片剂以及模拟尿样和血清样品中奋乃静和氟奋乃静的测定，结果令人满意。     

High-performance anion-exchange chromatography of carbohydrates using a new resin and pulsed amperometric detection

Summary This paper reports the results of a study on the use of a new polymer-based, strong anion-exchange, stationary phase for rapid and selective separation of carbohydrates and related compounds by high-pH, anion-exchange chromatography with pulsed amperometric detection. The new adsorbent has been obtained by direct nitration of 2.8 μm, spherical non-porous highly cross-linked, styrene-divinylbenzene copolymer beads, followed by reduction of superficially introduced nitro groups with nascent hydrogen and quaternization of the resultant amino groups with iodomethane. It is reported that by optimizing the ionic strength of the mobile phase, columns packed with the new anion-exchanger can be successfully employed to separate, either in isocratic or gradient elution mode, oligosaccharides, positional isomers of gluco-disaccharides, as well as uronic acids and sugar monophosphates.     

Efficiency of four different techniques in coupled HPLC-UV/VIS to quantify overlapping peaks with known spectral features

Summary Four different techniques to quantify unresolved chromatographic peaks with known spectral features combined with photodiode array detection, are investigated as regards their efficiency for the accurate and precise determination of drugs in the low g-range. The comparison includes peak suppression utilising difference chromatograms, first-order derivative chromatograms, selective chromatograms, generated by the calculation of orthogonal polynomial shares, and the powerful least-squares multicomponent analysis approach. Each of these methods uses UV-spectra taken throughout, the peak. The results presented and conclusions reached should enable the chromatographer to come to a decision about the reasonable use of these options now provided by multichannel detection in HPLC.     

流动注射化学发光法测定自来水中二氧化氯

在pH12．5的NaOH—KCl缓冲介质中，ClO2直接氧化Luminol能产生很强的化学发光，而且发光强度在一定的范围内与ClO2的浓度呈线性关系，据此建立了流动注射化学发光测定ClO2的新方法。探讨了最佳的发光条件，测定ClO2的线性范围为0．5—200μg／L，检出限为0．3μg／L。本法简便、怏速、灵敏，选择性和重复性较好，应用于自来水中剩余ClO2的测定，结果满意。     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

Substituent effects on the kinetics for the chemiluminescence reaction of 6-arylimidazo[1,2-a]pyrazin-3(7H)-ones (Cypridina luciferin analogues): support for the single electron transfer (SET)-oxygenation mechanism with triplet molecular oxygen

Kinetics of chemiluminescence reactions of 2-methyl-6-phenylimidazo[1,2-a]pyrazin-3(7H)-one (1c, Cypridina luciferin analogue) and substituent effects of the 6-aryl group of derivatives 1 strongly suggest that the rate-determining step is a single electron transfer from an anion derived from 1 to a triplet molecular oxygen (O₂) in the oxygenation process.