一般非均匀凸介质迁移算子本征值的分布

本文讨论一般非均匀凸介质所确定的迁移算子的本征值的分布问题，利用Ｈｉｌｂｅｒｔ空间的Ｈ算子理论，完整地解决了一般非均匀凸介质中迁移算子本征值的分布问题，若｛λｎ｝ｎ＝１＾∞是迁移算子本征值的一种计数，我们证明了Σ↓ｎ＝１↑∞ｅ＾６Ｒｅλｎτ〈＋∞，其中τ是粒子的最大逃逸时间，并对本征值的发散程度以及本征值的个数函数作了相应的讨论。     

Study on a Cross Diffusion Parabolic System

This paper considers a kind of strongly coupled cross diffusion parabolic system,which can be usedas the multi-dimensional Lyumkis energy transport model in semiconductor science.The global existence andlarge time behavior are obtained for smooth solution to the initial boundary value problem.When the initialdata are a small perturbation of an isothermal stationary solution,the smooth solution of the problem under theinsulating boundary condition,converges to that stationary solution exponentially fast as time goes to infinity.     

Microscopically structural studies of lithium niobate powders

On the basis of the crystallographic characteristics of lithium niobate (LN) crystals, Law of Bravais and Pauling's third rule (i.e. Polyhedral Sharing Rule) are employed with the aim to find the relationship between the crystal structure and morphological faces of LN powders. In order to validate our analytical results, we have successfully synthesized LN powders and measured the corresponding X-ray powder diffraction. Our results show that the structural analysis is consistent with the experimental data and is helpful and effective for us to control the single-crystal growth and to design superstructures at the specific plane, starting from the viewpoint of the microscopic behaviors of constituent chemical bonds and polyhedra in the crystallographic frame.     

The role of binder mobility in spontaneous adhesive contact and implications for cell adhesion

The standard view of mechanical adhesive contact is as a competition between a reduction in free energy when surfaces with bonding potential come into contact and an increase in free energy due to elastic deformation that is required to make these surfaces conform. An equilibrium state is defined by an incremental balance between these effects, akin to the Griffith crack growth criterion. In the case of adhesion of biological cells, the molecules that tend to form surface-to-surface bonds are confined to the cell wall but they are mobile within the wall, adding a new phenomenon of direct relevance to adhesive contact. In this article, the process of adhesive contact of an initially curved elastic plate to a flat surface is studied for the case in which the binders that account for adhesion are able to migrate within the plate. This is done by including entropic free energy of the binder distribution in the total free energy of the system. By adopting a constitutive assumption that binders migrate at a speed proportional to the local gradient in chemical potential, the transient growth of an adhesion zone due to binder transport is analyzed. For the case of a plate of very large extent, the problem can be solved in closed form, whereas numerical methods are invoked for the case of a plate of limited extent. Results are presented on the rate of growth of an adhesion zone in terms of system parameters, on the evolution of the distribution of binders and, in the case of a plate of limited extent, on the long-term limiting size of the adhesion zone.     

MEASUREMENTS OF Fe AND Cu K-Shell IONIZATION CROSS SECTIONS BY SLOW ELECTRON IMPACT

ＭＥＡＳＵＲＥＭＥＮＴＳＯＦＦｅＡＮＤＣｕＫ－ＳｈｅｌＩＯＮＩＺＡＴＩＯＮＣＲＯＳＳＳＥＣＴＩＯＮＳＢＹＳＬＯＷＥＬＥＣＴＲＯＮＩＭＰＡＣＴＬｉＴａｉｈｕａＡｎＺｈｕＬｕｏＺｈｅｎｇｍｉｎｇＣｅｎｔｅｒｆｏｒＲａｄｉａｔｉｏｎＰｈｙｓｉｃｓ，Ｉｎｓ...     

化学位移各向导性对半整数自旋四极核的2D NMR章动的影响

考察了化学位移各向异性对半整数自旋四极核2D NMR章动的影响.用数值方法对2D NMR章动实验的演化期的Hamiltonian矩阵进行对角化,然后用帐篷法进行粉末平均,获得了自旋为I=3/2、5/2、7/2和9/2的四极核在不同化学位移各向异性下的2D NMR章动谱.实验结果与理论计算符合较好.     

三级近似束流光学计算程序

为了精确计算束流在离子光学系统中的传输,用Visual FORTRAN 6.5语言编写了一个计算程序,长约13000行. 此程序可以计算由三圆筒单透镜、三膜片单透镜、双元筒透镜、均匀场静电加速管、磁四极透镜、六极磁铁、静电四极透镜、偏转磁铁、螺线管透镜、ExB~正交电磁场分析器、静电偏转器、漂浮管、QWR(Quarter Wave Resonators)和SLR(Split Loop Resonators)射频加速元件等元件任意组成的离子光学系统. 粒子轨迹的计算可精确到三级近似. 粒子的分布类型也可以有多种选择. 程序具有最优化计算功能,即可以自动调整元件的参数,以实现所需要的光学条件. 各元件之后的横向和纵向相图以及系统的束流包络线以图形方式显示在屏幕上.     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

Dependence of calculated electron effective attenuation lengths on transport mean free paths obtained from two atomic potentials

We report changes in electron effective attenuation lengths (EALs) resulting from use of transport mean free paths (TMFPs) obtained from the Dirac–Hartree–Fock (DHF) potential instead of the Thomas–Fermi–Dirac (TFD) potential in an algorithm used in the National Institute of Standards and Technology (NIST) Electron Effective‐Attenuation‐Length Database (SRD 82). TMFPs from the former potential are believed to be more reliable than those obtained from the latter potential. We investigated changes in the EALs for selected photoelectron and Auger‐electron lines in four elemental solids (Si, Cu, Ag, and W), for Si 2p photoelectrons of varying energy in SiO₂, and for photoelectrons excited by Al Kα X rays in four candidate gate‐dielectric materials (HfO₂, ZrO₂, HfSiO₄, and ZrSiO₄). For each material, we computed the change in the average EAL for a range of overlayer‐film thicknesses from zero to a maximum value corresponding to attenuation of the substrate signal to 10% of its original value. This EAL change was a maximum for electrons emitted normally from the surface and decreased monotonically with increasing emission angle. The maximum EAL change varied between ?4.4% and 2.6% for the three groups of materials. We found that the maximum EAL change correlated mainly with the TMFP change. We found that TMFP changes in other solids could generally lead to maximum EAL changes between ?2.6% and 1.9% for electron energies between 500 and 2000 eV. For lower energies, the maximum EAL changes could be larger for some solids. Our revised EALs for Si 2p photoelectrons in SiO₂ excited by Mg and Al Kα X rays agree within 0.5% with values reported by Seah and Spencer from a detailed analysis of SiO₂ film‐thickness measurements by XPS and other techniques. Copyright © 2006 John Wiley & Sons, Ltd.     

对称双吡咯甲烷的合成与分子内氢键的研究

５－甲基吡咯－２－羧酸酯在磺酰氢，溴或四乙酸铅作用下，生成相应的在５－甲基上含取代基的产物，后者不经分离不便可自缩合得标题化合物，核磁共振氢谱研究和分子构象木匠，当３，３位的取代基为甲酸（酯）基或乙酸（酯）基时，可形成３，３位酯基与另一吡咯环上的氮氢之间的分子内氢键，而３，３位是其它取代基，如乙酰基，丙酸（酯）基，丁酸（酯）基时不能形成类似的分子内氢键。