Formation of Ad-Layers and Clusters on Condensation of Metal Vapors on Solid Surfaces

Synthesis of organometallic materials can be accomplished in many cases by cocondensation of metal atoms and organic molecules at low temperatures. The reaction kinetics is determined by the competition between metal cluster growth and formation of the organometallic compound. Interesting compounds may contain one or more metal atoms; the latter type could be obtained by reaction between a cluster containing the desired number of metal atoms and an organic molecule. A precise knowledge of the events occurring on condensation of metal atoms and cluster formation can therefore be of value in the control of chemical synthesis. These phenomena have been investigated in connection with the study of the growth of thin metallic films, both experimentally and theoretically. Direct observation of the formation of very small clusters is difficult. The good agreement between experimental results and recent calculations for the development of large clusters, however, allows reliable theoretical conclusions for the first stages of adsorption and cluster formation. The present contribution describes experimental work on film growth and relevant theoretical concepts, and an attempt is made to develop applications to organometallic synthesis.     

Chemical and thermal analysis of the biopolymers in thyme (Thymus vulgaris)

Thyme (Thymus vulgaris) has been known, long time ago, for its aromatic properties. It contains essential oils and polymers such as cellulose (mixture of hemicellulose and cellulose) and lignin. The thyme, studied in this work, was gathered from the same place, in the period from November 1999 to October 2000. The chemical analysis (water, total ash, essential oils, extractive substances, cellulose, holocellulose and lignin) can be used roughly in the characterisation of the four periods that correspond to the four seasons of the year. The cellulose level was found to be more than lignin level in the wet periods (growth of the plant). The opposite was found in the dry periods. The total ash and essential oil levels were found to be high during the period of high pluviometry. The thermal decomposition of cellulose and holocellulose was found to fit well with the first-order kinetics. The activation energy, under air flow, was 185 and 196 kJ mol⁻¹ for cellulose and holocellulose, respectively. The maximum decomposition rate and thermal analysis heating rate of lignin were found to have a direct linear relationship.     

Potentiometric studies of dithiooxamide with a sulphide-selective membrane electrode

The sulphide-selective electrode is applicable to the determination of dithiooxamide by titration with silver nitrate. The effect of the alkali content of the solutions on the reaction has been studied. The reaction products are silver sulphide, oxalic acid, and nitric acid. If the alkali concentration of the solution is lower than that equivalent to the acid formed during the titration, the amount of sulphide produced by hydrolysis decreases and the equilibrium potential is established more slowly.The determination is rapid and accurate in the presence of 1 M sodium hydroxide.     

Mechanism of silicon film deposition in the RF plasma reduction of silicon tetrachloride

Plasma-chemical reduction of SiCl₄ in mixtures with H₂ and Ar has been studied by optical emission spectroscopy (OES) and laser interferometry techniques. It has been found that the Ar:H₂ ratio strongly affects the plasma composition as well as the deposition (r _D) and etch (r _E) rates of Si: H, Cl films and that the electron impact dissociation is the most important channel for the production of SiCl_x species, which are the precursors of the film growth. Chemisorption of SiCl_x and the reactive surface reaction SiCl_x+H–SiCl_(x–1)0+HCl are important steps in the deposition process. The suggested deposition model givesr _D [SiCl_x][H], in agreement with the experimental data. Etching of Si: H, Cl films occurs at high Ar: H₂ ratio when Cl atoms in the gas phase become appreciable and increases with increasing Cl concentration. The etch rate is controlled by the Cl atom chemisorption step.     

Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

The optimization of silica gel synthesis from chemical bottle waste using response surface methodology

To reduce the amount of hazardous chemical bottle waste in the environment, we report the optimization research of silica extraction in chemical bottle waste into silica gel. Alkali fusion and sol–gel process were utilised to prepare silica gel effectively. The alkali fusion process was carried out by adding sodium hydroxide to produce sodium silicate. Afterwards, silica gel was prepared by the sol–gel method using hydrochloric acid. Box-Behnken Design (BBD) was applied to Optimisation factors the poptimiseactors affecting the silica recovery. The factors that optimised mass ratio, particle size, and temperature. The optimum recovery of silica gel was obtained by SiO₂: NaOH mass ratio of 1:3, the particle size of 63–74 µm, and a temperature of 800 °C. The purity of silica gel optimum is 63.74% characterised using X-ray fluorescence. The structure of silica gel is the appearance of amorphous peaks at 2θ 20-30° characterised using an x-ray diffractogram. The silica gel surface was characterises using scanning electron microscopy-energy dispersive x-ray. It showed an irregular surface and characteristic showed that silica gel had a radius of 15.74 nm and a specific surface area of 297.08 m².     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

Chiral stationary phases for LC and SFC obtained by “Polymer coating”

Summary Chirally substituted Si–H-containing polysiloxanes were synthesized, which can be immobilized on small particle silica gel as well as on the smooth surfaces of fused silica capillaries. Immobilization is achieved either by crosslinking or by chemical bonding to the surfaces via silanol groups; both reactions can only be performed by addition of H₂PtCl₆, which acts as catalyst for hydrosilylation and as stoichiometric reagent for crosslinking. Chiral substituents of systematically varied chemical structure were introduced into the polysiloxanes by hydrosilylation. The mechanism of immobilization was investigated by spectroscopic methods, notably²⁹Si-NMR. Homogenous stationary-phase coatings of variable film thickness and corresponding retentivity can easily be achieved. The enantioselectivity of the phase systems was characterized in dependency on the chemical structure of the chiral selectors attached to the polysiloxane chain of the chiral stationary phases and also in terms of the functional groups introduced into the solutes by derivatisation.     

微波大气吸收衰减特性分析及分层数值算法

 给出了微波在大气中传输受气体分子吸收导致衰减的较精确计算模型，该模型扩展了传统计算模式忽略温度、湿度、压力变化及传播距离受限制的近似算法。结合我国某地区的实测气象数据模拟计算了该地区的大气吸收衰减，最后根据数值计算结果分析了微波随频率、发射角度以及月份（季度）变化的传播特性，并简要说明了此研究在微波遥感中的实际意义。