傅里叶红外光谱法鉴别部分胡椒属生药的研究

利用共有峰率和变异峰率双指标,以胡椒属七种药用植物的红外指纹图谱为依据,计算出所测样品的共有峰率和变异峰率。建立了胡椒属七种药用植物共有峰率和变异峰率双指标序列,结果揭示了胡椒属七种药用植物的亲缘关系。中药海风藤与石南藤、大叶蒟根茎的共有峰率均在77%以上,变异峰率均在30%以下,此三种胡椒属药用植物亲缘关系较近;海风藤与胡椒根茎、十八症根的共有峰率在61%左右,亲缘关系稍远;海风藤与蒌叶根茎的共有峰率仅为44%。亲缘关系较远。利用红外二阶导数谱图,可以鉴别中药海风藤及其伪品石南藤、十八症根、大叶蒟根茎、胡椒根茎等品种。傅里叶红外光谱法可以对样品进行无损处理,不需要对药材进行复杂的提取分离过程即可提供化合物的官能团、类别、氢键等信息。该法能从整体水平分析谱图特征峰,具有分析速度快,重现性好,非破坏性和样品量小,制样简单,专属性强,节约成本,保护环境等优点。可以解决中药海风藤因资源短缺,伪品较多,鉴别困难等问题,也可为临床用药的安全、有效提供保障。傅里叶红外光谱法为胡椒属药用植物亲缘关系的探讨和真伪鉴别提供了一种新方法。符合中药向综合分析和整体分析发展的趋势。     

Synthesis and textural evolution of alumina particles with mesoporous structures

Alumina particles with mesostructures were synthesized through a chemical precipitation method by using different inorganic aluminum salts followed by a heterogeneous azeotropic distillation and calcination process. The obtained mesoporous γ-alumina particles were systematically characterized by the X-ray diffraction, transmission electron microscopy and nitrogen adsorption-desorption measurement. Effects of the aluminum salt counter anion, pH value and the azeotropic distillation process on the structural or textural evolution of alumina particles were investigated. It is found that Cl⁻ in the reaction solution can restrain the textural evolution of the resultant precipitates into two-dimensional crystallized pseudoboehmite lamellae during the heterogeneous azeotropic distillation, and then transformed into γ-Al₂O₃ particles with mesostructures after further calcination at 1173 K, whereas coexisting SO₄²⁻ can promote above morphology evolution and then transformed into γ-Al₂O₃ nanofibers after calcination at 1173 K. Moreover nearly all materials retain relatively high specific surface areas larger than 100 m² g⁻¹ even after calcinations at 1173 K.     

电化聚合聚吡咯的角分布X射线光电子能谱研究

用角分布Ｘ射线光电子能谱（ＸＰＳ）测试和样品原位加热相结合的方法研究了阴离子是对甲苯磺酸根的电生导电聚吡咯的化学和聚集态结构．其结果表明聚吡咯表面约几个原子层内原子的相对浓度依下述次序递减：Ｃ＞Ｏ＞Ｓ＞Ｎ；导电聚吡咯中的氮原子至少有吡咯氮和氧化态氮两种；在２００℃加热以后聚合物链不受影响，但阴离子向表面迁移，同时氧化态氮大大减少．     

Dopant-free NiOx Nanocrystals: A Low-cost and Stable Hole Transport Material for Commercializing Perovskite Optoelectronics

Advancing inverted (p-i-n) perovskite solar cells (PSCs) is critical for commercial applications given their compatibility with different bottom cells for tandem photovoltaics, low-temperature processability (≤100 °C), and promising operational stability. Although inverted PSCs have achieved an efficiency of over 25 % using doped or expensive organic hole transport materials (HTMs), their synthesis cost and stability still cannot meet the requirements for their commercialization. Recently, dopant-free and low-cost non-stoichiometric nickel oxide nanocrystals (NiO_x NCs) have been extensively studied as a low-cost and effective HTM in perovskite optoelectronics. In this minireview, we summarize the synthesis and surface-functionalization methods of NiO_x NCs. Then, the applications of NiO_x NCs in other perovskite optoelectronics beyond photovoltaics are discussed. Finally, we provide a perspective for the future development of NiO_x NCs for the commercialization of perovskite optoelectronics.     

p型硅片上激光诱导局部化学沉镍

在以肼为还原剂的碱性化学镀镍溶液中实现ｐ型单晶硅片上激光诱导微区化学沉镍，讨论了激光能量、照射时间对镍沉积层的影响，使用ＳＥＭ、ＡＥＳ和ＲＢＳ等方面对镀层的形貌、性质进行了分析。激光诱导化学沉积得到了均匀致密、结合力好的纯镍镀层。镀层与基体间具有Ｓｃｈｏｔｔｋｙ接触特性。     

Development of m-plane GaN anisotropic film properties during MOVPE growth on LiAlO2 substrates

The anisotropic film properties of m-plane GaN deposited by metal organic vapour phase epitaxy (MOVPE) on LiAlO₂ substrates are investigated. To study the development of layer properties during epitaxy, the total film thickness is varied between 0.2 and 1.7 μm. A surface roughening is observed caused by the increased size of hillock-like features. Additionally, small steps which are perfectly aligned in (1 1 −2 0) planes appear for samples with a thickness of ∼0.5 μm and above. Simultaneously, the X-ray rocking curve (XRC) full width at half maximum (FWHM) values become strongly dependent on incident X-ray beam direction beyond this critical thickness. Anisotropic in-plane compressive strain is initially present and gradually relaxes mainly in the [1 1 −2 0] direction when growing thicker films. Low-temperature photoluminescence (PL) spectra are dominated by the GaN near-band-edge peak and show only weak signal related to basal plane stacking faults (BSF). The measured background electron concentration is reduced from ∼10²⁰ to ∼10¹⁹ cm⁻³ for film thicknesses of 0.2 μm and ∼1 μm while the electron mobilities rise from ∼20 to ∼130 cm²/V s. The mobilities are significantly higher in [0 0 0 1] direction which we explain by the presence of extended planar defects in the prismatic plane. Such defects are assumed to be also the cause for the observed surface steps and anisotropic XRC broadening.     

抗坏血酸在聚阿魏酸修饰玻碳电极上的电化学行为研究

研究了抗坏血酸(AA)在聚阿魏酸修饰电极上的电化学性质。在AA存在的条件下,电极过程由扩散控制,测得扩散系数为8.18×10-8cm2/s。AA浓度在0.01~5.0 mmol/L范围内与峰电流呈现良好的线性关系。通过计时安培法测得催化速率常数为8.6×103mol-1.L.s-1。     

Biogenic aldehyde determination by reactive paper spray ionization mass spectrometry

Ionization of aliphatic and aromatic aldehydes is improved by performing simultaneous chemical derivatization using 4-aminophenol to produce charged iminium ions during paper spray ionization. Accelerated reactions occur in the microdroplets generated during the paper spray ionization event for the tested aldehydes (formaldehyde, n-pentanaldehyde, n-nonanaldehyde, n-decanaldehyde, n-dodecanaldehyde, benzaldehyde, m-anisaldehyde, and p-hydroxybenzaldehyde). Tandem mass spectrometric analysis of the iminium ions using collision-induced dissociation demonstrated that straight chain aldehydes give a characteristic fragment at m/z 122 (shown to correspond to protonated 4-(methyleneamino)phenol), while the aromatic aldehyde iminium ions fragment to give a characteristic product ion at m/z 120. These features allow straightforward identification of linear and aromatic aldehydes. Quantitative analysis of n-nonaldehyde using a benchtop mass spectrometer demonstrated a linear response over 3 orders of magnitude from 2.5 ng to 5 μg of aldehyde loaded on the filter paper emitter. The limit of detection was determined to be 2.2 ng for this aldehyde. The method had a precision of 22%, relative standard deviation. The experiment was also implemented using a portable ion trap mass spectrometer.     

低浓度HPAM/AlCit交联体系的27Al NMR研究

用27Al NMR谱研究了高分子量低浓度的部分水解聚丙烯酰胺(HPAM)与柠檬酸铝(AlCit)体系交联反应过程中Al的化学位移和Al的自旋-晶格弛豫时间的变化. 结果表明, HPAM与AlCit反应后, 与HPAM分子链上的羧基发生配位交联的Al的化学位移向低场移动, 而不参与交联反应的AlCit分子结构中Al的化学位移基本不变. HPAM/AlCit交联体系中存在三种形态的Al, 分别对应三种不同的自旋-晶格弛豫时间. 当HPAM的质量浓度≤200 mg/L时, HPAM与AlCit反应过程中交联态Al的自旋-晶格弛豫时间τ13随反应进行变小, HPAM与AlCit主要发生分子内交联反应. 当HPAM的质量浓度≥250 mg/L时, HPAM与AlCit反应过程中交联态Al的自旋-晶格弛豫时间τ13随反应进行变大, HPAM与AlCit主要发生分子间交联反应.     

Silver-coated LiVPO4F composite with improved electrochemical performance as cathode material for lithium-ion batteries

Nano-structured LiVPO₄F/Ag composite cathode material has been successfully synthesized via a sol–gel route. The structural and physical properties, as well as the electrochemical performance of the material are compared with those of the pristine LiVPO₄F. X-ray diffraction (XRD) and scanning electron microscopy (SEM) reveal that Ag particles are uniformly dispersed on the surface of LiVPO₄F without destroying the crystal structure of the bulk material. An analysis of the electrochemical measurements show that the Ag-modified LiVPO₄F material exhibits high discharge capacity, good cycle performance (108.5 mAh g⁻¹ after 50th cycles at 0.1 C, 93% of initial discharge capacity) and excellent rate behavior (81.8 mAh g⁻¹ for initial discharge capacity at 5 C). The electrochemical impedance spectroscopy (EIS) results reveal that the adding of Ag decreases the charge-transfer resistance (R_ct) of LiVPO₄F cathode. This study demonstrates that Ag-coating is a promising way to improve the electrochemical performance of the pristine LiVPO₄F for lithium-ion batteries cathode material.