Properties of cerium-zirconium mixed oxides partially substituted by neodymium: Comparison with Zr-Ce-Pr-O ternary oxides

CeO₂ doped with praseodymium, neodymium and/or zirconium atoms were prepared by coprecipitation and by the sol-gel method. Structural properties were investigated by in situ XRD and Raman spectroscopy while oxygen storage capacity (OSC) was measured by transient CO oxidation. All the compounds, except pure Nd₂O₃, have a fluorite-type structure as well as a Raman band at 560 cm⁻¹ characteristic of the oxygen vacancies involving non-stoichiometric oxides. The lattice parameter under hydrogen, being dependent on the temperature, revealed two reduction mechanisms: one at a low temperature at the surface and another at a high temperature in the bulk. Ce-Nd binary oxides show a strong tendency towards crystallite aggregation, which reduces accessibility to gases and OSC properties. Zirconium improves the thermal resistance to sintering of both Ce-Nd and Ce-Pr oxides. The Zr-Ce-Pr-O followed by Zr-Ce-Nd-O compounds displaying high oxygen mobility at a low temperature, appear to be very promising for practical applications such as OSC materials.     

三配位五价磷化合物[R—P（=X）（=Y）的结构及化学性质

综述了三配位五价磷化合物的结构犊 征及其所具有的加成反应，络合反应，磷中心的亲电反应等化学性质。参考文献２２篇。     

基团的电子效应与单取代苯对位^1H,^13C的化学位移

基团的电子效应与单取代苯对位１Ｈ、１３Ｃ的化学位移＊韩长日冯娇杨钟照平（海南师范学院化学系海口５７１１５８）关键词１Ｈ的化学位移１３Ｃ的化学位移基团电负性共轭效应引言在１Ｈ、１３Ｃ核磁共振谱中，化学位移值的大小主要取决于屏蔽作用的大小，而屏蔽作用的大...     

球壳烯类的化学修饰

自从Kratschmer和Huffman发表了较为简便的制备和分离碳-60,碳-70的方法以来,对于球壳烯类,特别是碳-60的表征和物化性质已进行了较为翔实的研究。关于球壳烯类的化学修饰,尽管起步较晚,对其兴趣也日益高涨。本文综述了球壳烯类的化学修饰,特别在球壳烯外壳的化学反应方面。     

Composition and spectral studies of polyaniline salts

Five different polyaniline salts have been prepared by chemical polymerization of aniline in aqueous solution of different acids. The polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Electron paramagnetic, electronic absorption, infrared spectral and conductivity measurements have been performed on the polyaniline salts and polyaniline bases. This composition and the extent of dopant in polyaniline salt systems have been determined. There is no definite correlation between the conductivity and the stoichiometric ratio between the polyaniline base and the acid, and also the spin concentration.     

Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

Quality evaluation of fingerprints of herbal medicine with chromatographic data

In this study, local least squares (LLS) and principal component analysis (PCA) were applied to deal with the disturbances in a data set of chromatographic fingerprints after necessary data transformations. It has been demonstrated that PCA with standard normal variate (SNV) transformation of data led to meaningful classification of 33 different Erigeron breviscapus herbal samples. The result was also corroborated by variance squares discriminant method. The quality of herbal objects was further evaluated, and the causes of this fact have been explained from a chemical point of view. At the same time, it implied an idea for qualitative evaluation of the herbal objects with a common class pattern of chromatographic fingerprints.     

Probing the hydride transfer process in the lumiflavine-1-methylnicotinamide model system using group softness

The hydride transfer process between the isoalloxazine moiety of flavins and the nicotinamide moiety of NAD(P)H has been explored by using density functional theory based reactivity index in the 1-methylnicotinamide-lumiflavine model system. Based on crystallographic data available, we have found that the group softness index helps to locate and orientate reactive regions in these interacting molecules while the electrophilicity index successfully describes the reactivity pattern of this system.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

DMF-甲醇体系粘度与核磁共振化学位移的同时关联

提出了一个基于局部组成概念上的核磁共振模型. 利用该模型和以前别人提出的局部组成型粘度方程, 成功地同时关联属于传递性质的粘度数据和属于波谱性质的核磁共振化学位移数据，关联所得到化学位移的平均绝对偏差小于0.0072，粘度的平均绝对偏差小于0.0006 mPa•s，结果表明提出的局部组成模型是合理的.