Analytical characteristics and sensitivity mechanisms of electrolyte-insulator-semiconductor system-based chemical sensors—a critical review

Recent trends in research and development of electrolyte-insulator-semiconductor (EIS) field-effect chemical sensors (ion-selective field-effect transistors, light-addressable potentiometric sensors, capacitive EIS-sensors) with inorganic gate insulators (oxide, nitride and chalcogenide films) are reviewed. Physical properties of EIS systems and basic mechanisms of their chemical sensitivity are examined. Analytical characteristics and sensing mechanisms of EIS pH sensors with oxide and nitride films, as well as metal ions sensors with chalcogenide films, are critically discussed. Prospects of future research on EIS field-effect biosensors are briefly outlined.     

磷脂酶A2家族的功能性分类研究

采用“结合强度指纹图谱分析”方法, 通过对多重分子对接得到的作用强度数据进行聚类矩阵分析对蛋白质进行功能分类. 着重研究了磷脂酶A₂家族基于抑制剂作用强度的功能分类, 并且与基于序列的聚类结果进行比较, 成功地解决了序列比对方法不能处理的远源蛋白(cPLA₂)的分类问题.     

Engineering of Cardiotoxin by Chemical Synthesis: (I) Rapid Synthesis of Fully Active Cardiotoxin II and IV of Taiwan Cobra Venom

Two 60-residue snake toxins with four disulfide bridges, cardiotoxin II and IV, of Taiwan cobra (Naja naja atra) have been rapidly prepared in overall yields of 3.9% (cardiotoxin II) and 3.7% (cardiotoxin IV) within three weeks using the chemical method. Physicochemical characterization of these synthetic cardiotoxins was carried out by amino acid analysis, mass spectroscopy, capillary electrophoresis, peptide mapping, circular dichroism spectroscopy, and lethal toxicity. As compared with natural cardiotoxins, the results indicated that the synthetic cardiotoxins possessed the same physicochemical properties as those of natural ones. Therefore, in addition to preparation of various important toxins with satisfactory quantities for biochemical and pharmacological studies within a short lime, this rapid method also provides an important route to obtain many interesting toxins and designed toxin analogues for structure/function relationship studies in the near further.     

The optimization of silica gel synthesis from chemical bottle waste using response surface methodology

To reduce the amount of hazardous chemical bottle waste in the environment, we report the optimization research of silica extraction in chemical bottle waste into silica gel. Alkali fusion and sol–gel process were utilised to prepare silica gel effectively. The alkali fusion process was carried out by adding sodium hydroxide to produce sodium silicate. Afterwards, silica gel was prepared by the sol–gel method using hydrochloric acid. Box-Behnken Design (BBD) was applied to Optimisation factors the poptimiseactors affecting the silica recovery. The factors that optimised mass ratio, particle size, and temperature. The optimum recovery of silica gel was obtained by SiO₂: NaOH mass ratio of 1:3, the particle size of 63–74 µm, and a temperature of 800 °C. The purity of silica gel optimum is 63.74% characterised using X-ray fluorescence. The structure of silica gel is the appearance of amorphous peaks at 2θ 20-30° characterised using an x-ray diffractogram. The silica gel surface was characterises using scanning electron microscopy-energy dispersive x-ray. It showed an irregular surface and characteristic showed that silica gel had a radius of 15.74 nm and a specific surface area of 297.08 m².     

指纹图谱法在参麦注射液质控中的应用

 中医药理论和实践要求综合评价中药的质量 ,指纹图谱法是对中药制剂进行综合宏观分析的可行手段之一 ,因此采用反相高效液相建立了参麦注射液的特征指纹图谱。条件 :Hypersil C18(4 6mmi d × 2 5 0mm ,5 μm)反相柱 ,流动相由水 (A)和乙腈 (B)组成 ,B的体积分数在 5 0min内由 5 %线性增长到 95 % ,流速为1 0mL/min ;紫外检测 ,波长为 2 0 2nm。 2 3个特征指纹峰与内标 (联苯 )的峰面积比作为指标 ,结合主成分分析 投影判别法比较了同一厂家不同批次产品和不同厂家同类产品的化学指纹差异。     

Probing the Effects of Reagent Gas Pressure and Ion Source Temperature for Dimethyl Ether Chemical Ionization of Tricyclic Antidepressants in an External Source Ion Trap Mass Spectrometer

This study examines the reagent gas pressure and ion source temperature dependence for dimethyl ether chemical ionization (DME CI) mass spectra recorded with an external source ion trap mass spectrometer (ITMS). Information for better controls of the reagent gas pressure in order to obtain fair CI spectra is provided. The origin of M^+? ions observed in DME CIMS is discussed in detail. Furthermore, the ion source temperature effect on the DME CI is also investigated.     

Titanium as a chemical modifier for the determination of cobalt in marine sediments

The determination of cobalt in marine sediments by electrothermal atomic absorption spectrometry was studied using no modifier and magnesium and titanium as modifiers. Titanium is one of the major sediment constituents, which widely affects the cobalt determination and it was studied as a chemical modifier since it was the only concomitant that increased the cobalt signal in the concentration range usually found in sediments. The performance of Mg and Ti as chemical modifiers was compared relative to maximum pyrolysis and atomization temperatures, linear calibration range, sensitivity and matrix effects. The pyrolysis curves showed that the analyte could be stabilized up to 1400 °C when either Ti or Mg(NO₃)₂ was present, while only 1000 °C could be used in the absence of a modifier. The optimum atomization temperature was 2500 °C in all cases. Analytical curves were compared using no modifier, 5 μg Ti and 100 μg Mg(NO₃)₂ as modifiers, and the linear range found was up to approximately 4 ng Co whether a modifier was used or not. With Ti as a chemical modifier, analytical curves for cobalt in aqueous solution and in a synthetic matrix resulted in the same sensitivity (m₀=55 pg), whereas the use of Mg led to characteristic mass values of 59 and 72 pg in aqueous solution and in a synthetic matrix, respectively, showing some matrix effect. The detection limits (3σ, n=10) were 0.4 μg g⁻¹ using no modifier and 0.3 μg g⁻¹ with Ti as a modifier in the original matrix. A reference estuarine sediment NIST 1646 with a non-certified content of 10.5 μg g⁻¹ Co was analyzed and the found value of 10.9±2.4 μg g⁻¹, (n=3), using Ti as chemical modifier and calibration against aqueous standards, was in good agreement with the recommended value.     

A facile preparation of nanocrystalline Mo2C from graphite or carbon nanotubes

Nanocrystalline Mo₂C powders were successfully synthesized at 500 °C by reacting molybdenum chloride (MoCl₅) with C (graphite or carbon nanotube) in metallic sodium medium. X-ray powder diffractometer (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscope (XPS) and surface area analyzer (BET method) were used to characterize the samples. Experiments reveal that the carbon source used for the carbide synthesis has a great effect on the particle size and the surface area of the samples. When micro-sized graphite was used as C source the obtained nanocrystalline Mo₂C powder consists of particles of 30∼100 nm, with a surface area of 2.311 m²/g. When carbon nanotubes were used as C source, the as-synthesized Mo₂C sample is composed of particles of 20∼50 nm, with a surface area of 23.458 m²/g, which is an order of magnitude larger than that of the carbide prepared from the graphite.     

The reaction of phenylarsenazo with chromium(III)

The conditions for the reaction between phenylarsenazo (PAA) (2-[(2-arsonophenyl)azoj-7-(phenylazo)-1, 8-dihydroxynaphthalene-3,6-disulphonic acid) and chromium(III) have been studied. A blue 1:1 complex is formed at pH 2.2 on heating the reactants at 100 degrees for 15 min. It has maximum absorption at 635 nm and is stable for at least 24 hr. The molar absorptivity is 3.3 x 10(4) 1.mole(-1).cm(-1). Beer's law is obeyed in the chromium concentration range 0-1.4 mug ml . The reaction has been successfully applied to determination of chromium in alloy steel.     

Stereochemistry of planarchiral compounds,part X

2,7-Dibromo-1,6-methano[10]anulene (3) and 2,9-Dibromo-syn-1,6:8,13-diimino[14]anulene (9) were quantitatively separated into their enantiomers by chromatography on triacetylcellulose (TAC) in ethanol. X-ray structure analysis (Bijvoet technique) established the chiralities (+)(R)-3 and (+)(S)-9 for the dextrorotatory enantiomers.Comparison of the CD spectra allowed the configurational assignment to further optically active [10] and [14] anulenes which were also accessible by chromatography onTAC. Conversion of (+)(R)-2-bromo-1,6-methano[10]anulene (2) into the corresponding methylester (–)-4 confirmed its previously proposed chirality (–)(R).2,7-Dibromo-1,6-oxido[10]anulene (7) and 2,9-dibromo-syn-diimino[14]anulene (9) are in contrast to the 2,9-dibromo-syn-dioxido[14]anulene (10) optically stable until 250°C. Consequently their inversion barriers are higher than 42 kcal (176 kJ) mol^–1.The CD spectra of mono and disubstituted anulenes (with C₁ and C₂ symmetry, resp.) are compared: For the [10]anulenes theCotton effect around 330 nm seems to be specific for their configuration with a positive effect indicating (S)-chirality and vice versa. Some regularities concerning the chromatographic resolutions are discussed.

---

Stereochemie planar chialer Verbindungen, 10. Mitt.: Röntgenkristallstruktur und absolute Chiralität überbrückter [10]- und [14] Anulene

Zusammenfassung 2,7-Dibrom-1,6-methano[10]anulen (3) und 2,9-Dibrom-syn-1,6:8,13-diimino[14]anulen (9) wurden durch Chromatographie an Triacetylcellulose (TAC) in Ethanol quantitativ in ihre Enantiomeren getrennt. Röntgenstruktur-analyse (Bijvoet-Technik) bewies für die rechtsdrehenden Enantiomeren die Chiralität (+)(R)-3 bzw. (+)(S)-9.Ein Vergleich der CD-Spektren ermöglichte die Konfigurationszuordnung weiterer optisch aktiver [10]- und [14]Anulene, die gleichfalls durch Chromato-graphie anTAC erhalten worden waren. Umwandlung von (+)(R)-2-Brom-1,6-methano[10]anulen (2) in den entsprechenden Methylester (–)-4 bestätigte dessen schon früher vorgeschlagene Chiralität (–)(R).Dibrom-1,6-oxido[10]anulen (7) und Dibrom-diimino[14]anulen (9) sind im Gegensatz zum Dioxido[14]anulen (10) bis 250°C optisch stabil. Ihre Inver-sionsbarrieren liegen somit über 42 kcal (176kJ) mol^–1.Die CD-Spektren von mono- und disubstituierten Anulenen (mit C₁ bzw. C₂-Symmetrie) werden verglichen: Für die [10]Anulene scheint derCottoneffekt um 330 nm konfigurationsspezifisch zu sein, wobei ein positiver Effekt (S)-Chiralität anzeigt — und vice versa. Einige Regelmäßigkeiten bezüglich der chromatographischen Enantiomerentrennung werden diskutiert.