土壤环境中铅的化学

论述了环境中铅的背景值、来源、污染、质量标准、化学循环以及环境中铅的烷基化，为铅污染治理提供理论依据。     

Potentiometric studies of dithiooxamide with a sulphide-selective membrane electrode

The sulphide-selective electrode is applicable to the determination of dithiooxamide by titration with silver nitrate. The effect of the alkali content of the solutions on the reaction has been studied. The reaction products are silver sulphide, oxalic acid, and nitric acid. If the alkali concentration of the solution is lower than that equivalent to the acid formed during the titration, the amount of sulphide produced by hydrolysis decreases and the equilibrium potential is established more slowly.The determination is rapid and accurate in the presence of 1 M sodium hydroxide.     

Study of Tea Digitized Chromatographic Fingerprint Spectra Using Micellar Electrokinetic Chromatography

IntroductionTeaisthemostwidelyconsumedbeverageinpeople’slife .Theheightenedpopularityofthisbeveragethroughouttheworldinrecentyearsmaybedueinparttotheevidenceofarelationshipbetweenteaconsumptionandpreventionofcertainformsofhumandisease .Themaincomponentsofteaarepolyphenoliccompounds ,commonlyknownascatechins ,whichrepresentagroupofcom poundsbelongingtotheflavonoidfamily .Thesecom poundsarewidelydistributedinthetealeavesandconsti tuteupto 30 %ofthedryleafweight.1Muchinteresthasbeenfocusedoncat…     

C_（60）化学修饰的PNVC材料的UV－VIS谱研究

本实验采用金属有机化学方法成功地将富勒烯分子引入到ＰＮＶＣ侧链形成ＣＢＰ（ＣｈａｒｍＢｒａｃｅｌｅｔＰｏｌｙｍｅｒ）型共聚功能材料，研究了其ＵＶ－ＶＩｓ谱行为。结果表明，Ｃ_（６０）或Ｃ_（６０）／Ｃ_（７０）混合物化学修饰的产物其紫外可见谱明显向长波方向移动，谱峰范围由２８０ｎｍ扩展至８７０ｎｍ。Ｃ_（６０）含量增加，红移程度增大，在可见区域的吸收程度亦增加。产物主要存在５个特征峰，分别位于２１５ｎｍ、２６５ｎｍ、２９８ｎｍ、３３５ｎｍ、３４５ｎｍ处，其中２１５ｎｍ峰为Ｃ_（６０）仅存的特征峰。最后讨论了不同合成条件与产物硝化处理对其ＵＶ－ＶＩＳ谱行为的影响。     

Enhanced selectivity for inhibition of analog-sensitive protein kinases through scaffold optimization

The ability to inhibit any protein kinase of interest with a small molecule is enabled by a combination of genetics and chemistry. Genetics is used to modify the active site of a single kinase to render it distinct from all naturally occurring kinases. Next, organic synthesis is used to develop a small molecule, which does not bind to wild-type kinases but is a potent inhibitor of the engineered kinase. This approach, termed chemical genetics, has been used to generate highly potent mutant kinase-specific inhibitors based on a pyrazolopyrimidine scaffold. Here, we asked if the selectivity of the resulting pyrazolopyrimidines could be improved, as they inhibit several wild-type kinases with low-micromolar IC₅₀ values. Our approach to improve the selectivity of allele-specific inhibitors was to explore a second kinase inhibitor scaffold. A series of 6,9-disubstituted purines was designed, synthesized, and evaluated for inhibitory activity against several kinases in vitro and in vivo. Several purines proved to be potent inhibitors against the analog-sensitive kinases and exhibited greater selectivity than the existing pyrazolopyrimidines.     

Modification of HPTLC-plates by in situ chemical bonding with non-polar and polar organosilanes

A method has been developed for the preparation of modified silica plates for high performance thin-layer chromatography (HPTLC). Some typical organosilanes were thus allowed to react in situ with the silica of Merck HPTLC-plates. This method was found to be highly reproducible, simple and cheap. Non-polar plates were prepared and compared with commercial plates from Merck, Whatman and Macherey-Nagel. Modification with cyanodecyltrichlorosilane resulted in plates that showed good coverage, efficiency and low residual silica activity. Silica modified with a multifunctional silane has different properties in different organic solvents. It will appear to be non-polar in a polar solvent and vice versa. New advantageous separation systems are thus made feasible by the presence of cyano groups on the plate. The utility of modified thin-layer plates is demonstrated by the separation of some homologues of p-hydroxybenzoic acid esters and of some polycyclic aromatic hydrocarbons.     

Zum chemischen Transport von Molybdän mit SbBr3 – Experimente und Modellrechnungen

On the Chemical Transport of Molybdenum using SbBr₃ – Experiments and Thermochemical Calculations Mo migrates in a temperature gradient from the region of higher temperature to the lower temperature using SbBr₃ as transport agent. For various mean transport temperatures (750 ? T ? 1000°C; T = 0,5 (T₁ + T₂); T₂ ? T₁ = 100°C) we observed small transport rates (? ? 0,6 mg/h) which rise up to 16 mg/h for higher transport agent concentrations. Small amounts of MoO₂ and Sb were detected beside Mo in the sink. The observed solid phases in the sink are in agreement with thermodynamical calculations by CVTrans which also demonstrate that the formation of MoO₂ and Sb as well as the transport effect of SbBr₃ are caused by traces of H₂O from the quartz glass wall. The sequence of deposition of Mo, MoO₂ and Sb in the examined temperature range can be calculated (CVTrans) and measured with the transport balance.     

飞行时间型质量分析器(TOFMS)的研制及应用

自行研制了电子碰撞离子化的飞行时间型质量分析器（ＴＯＦＭＳ），用于物质的化学分析。用研制的ＴＯＦＭＳ测量了Ａｒ离子化的飞行时间谱和离子的部分电离截面积比与碰撞电子能量的依赖关系，将它与Ｓｔｅｐｓｈａｎ等人的实验结果进行了比较。     

Coated-wire organic ion-selective electrodes in titrations based on ion-pair formation : Determination of arenediazonium salts with sodium tetraphenylborate

Titrimetric determinations of arenediazonium salts can be based on ion-pair formation between the diazonium cation and tetraphenylborate. Titrations are done under cooling with ice and are followed potentiometrically with organic ion-selective electrodes comprising PVC membranes plasticized with polar solvents and coated on aluminium wires. The method was tested in determinations of arenediazonium salts derived from 20 aromatic amines, including aniline, toluidines, naphthylamines and their derivatives. Except for compounds containing hydrophylic groups such as —COOH and —OH, the potentiometric titration curves have well defined end-points. The results are reproducible, with relative standard deviations in the range 0.4–1.4% at the millimolar level. The method can be used for reliable determinations of arenediazonium salts in analytical control of azo dyestuff production.     

Chemical ionization mass spectrometry of hydrofluorocarbons, hydrofluorocarbon ethers and perfluoroalkenes

Positive and negative chemical ionization (CI) mass spectrometry is studied for hydrofluorocarbons (HFCs), hydrofluorocarbon ethers (HFEs), and perfluoroalkenes (PFCs) using various kinds of reagent gas. While no quasi-molecular ion was observed under electron impact ionization for saturated MFCs, [M-F]⁺ is detected under CI conditions using methane as a reagent gas. Mechanisms for the generation of [M-F]⁺ are discussed. Furthermore, nitrogen monoxide can be used as a reagent gas to observe [M + NO]⁺ for many HFCs and HFEs. In negative mode chloroform is also available to generate [M + Cl]⁻ for HFCs and HFEs containing -CHF- groups.