低浓度HPAM/AlCit交联体系的27Al NMR研究

用27Al NMR谱研究了高分子量低浓度的部分水解聚丙烯酰胺(HPAM)与柠檬酸铝(AlCit)体系交联反应过程中Al的化学位移和Al的自旋-晶格弛豫时间的变化. 结果表明, HPAM与AlCit反应后, 与HPAM分子链上的羧基发生配位交联的Al的化学位移向低场移动, 而不参与交联反应的AlCit分子结构中Al的化学位移基本不变. HPAM/AlCit交联体系中存在三种形态的Al, 分别对应三种不同的自旋-晶格弛豫时间. 当HPAM的质量浓度≤200 mg/L时, HPAM与AlCit反应过程中交联态Al的自旋-晶格弛豫时间τ13随反应进行变小, HPAM与AlCit主要发生分子内交联反应. 当HPAM的质量浓度≥250 mg/L时, HPAM与AlCit反应过程中交联态Al的自旋-晶格弛豫时间τ13随反应进行变大, HPAM与AlCit主要发生分子间交联反应.     

Investigations on Chemical Vapour Transport of Intermetallic Phases in the System Co/Fe/Si

The ternary phases existing on the quasi binary section CoSi/FeSi and CoSi₂/β‐FeSi₂ have been investigated by solid state reactions and chemical transport. The solid solution serie Co_xFe_1‐xSi can be described as a regular solution. The transport behaviour calculated is in good agreement with the experiments. The phases have been characterized by X‐ray powder diffraction, EDX and ICP‐OES. The temperature dependence of the resistivity has been measured from 20 K up to room temperature on single crystals.     

Thermal characteristics of polyurethane foams incorporated with phase change materials

Thermal energy storage plays an important role in heat management because of the demand for developed energy conservation, and has applications in diverse areas, from building heating/cooling systems which enable solar energy incorporation into the structure, to textiles and clothings providing an enhanced thermal comfort. In this study, we aimed to improve thermal characteristics of polyurethane rigid foams that have been widely used for thermal insulation as the ultimate energy savers due to their ability to form sandwich structures with various facer materials. Through a laboratory-scale work, two paraffin waxes acting as phase change materials, namely n-hexadecane and n-octadecane, each of which is capable of managing large heat storage/release, were directly incorporated into the polyurethane foams at different ratios. Polymerization modified by means of n-alkane addition could be achieved without any adverse effect. In order to determine both structural and thermal characteristics, seven types of foams produced were examined by FT-IR, SEM, DSC analyses, calorimeter bomb and mechanical tests. Results show that polyurethane foams can be designed as thermal insulators equipped with an improved buffering function against temperature changes.     

Preparation and Characterization of Microencapsulated Hexadecane Used for Thermal Energy Storage

Polyurea microcapsules about 2.5μm in diameter containing phase change material for thermal energy storage application were synthesized and characterized by interfacial polycondensation method with toluene-2,4-diisocyanate and ethylenediamine as monomers in an emulsion system. Hexadecane was used as a phase change material and OP, which is nonionic surfactant, and used as an emulsifier. The chemical structure and thermal behavior of the microcapsules were investigated by FTIR and thermal analysis respectively. The results show encapsulated hexadecane has a good potential as a solar energy storage material.     

Nanostructured ZrO2 and Zr‐C‐N Coatings from Chemical Vapor Deposition of Metal‐Organic Precursors

Nanocrystalline zirconium carbonitride (Zr‐C‐N) and zirconium oxide (ZrO₂) films were deposited by chemical vapor deposition (CVD) of zirconium‐tetrakis‐diethylamide (Zr(NEt₂)₄) and ‐tert‐butyloxide (Zr(OBu^t)₄), respectively. The films were deposited on iron substrates and characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The Zr‐C‐N films show blue, golden brown or bronze colours, with colour stability depending upon the precursor composition (pure metal amide or mixed with Et₂NH). The deposition temperature showed no pronounced effect on the granular morphology of the Zr‐C‐N films. The XRD data of the films correspond to the formation of carbonitride phase whereas the XPS analyses revealed a strong surface oxidation and incorporation of oxygen in the film. The films deposited using a mixture of Zr(NEt₂)₄ and Et₂NH showed higher N content, better adhesion and scratch resistance when compared to films obtained from the CVD of pure Zr(NEt₂)₄. Subject to the precursor composition and deposition temperature (550‐750 °C), the microhardness values of Zr‐C‐N films were found to be in the range 2.11‐5.65 GPa. For ZrO₂ films, morphology and phase composition strongly depend on the deposition temperature. The CVD deposits obtained at 350 °C show tetragonal ZrO₂ to be the only crystalline phase. Upon increasing the deposition temperature to 450 °C, a mixture of tetragonal and monoclinic modifications was formed with morphology made up of interwoven elongated grains. At higher temperatures (550 and 650 °C), pure monoclinic phase was obtained with facetted grains and developed texture.     

Chemical bonding effect in electron scattering by gaseous molecules

The experimental intensity of 30 keV electron small angle scattering by a gaseous molecule is much different from the calculation using usual independent atom model. This is due to the rearrangement of electron distribution in a molecule by the formation of chemical bonds, and is called chemical bonding effect (CBE). The molecules studied are mainly hydrocarbons such as methane, acetylene, ethane, etc. and some non-hydrocarbons. The measurement was carried out on both elastic and total scattering and the effect was found for not only elastic but also inelastic scattering. The effect is relatively large for hydrogen rich molecules as H₂O, NH₃ and hydrocarbons, but is essentially related to the number of atoms contained in molecules. The origin of CBE will attribute mainly to the concentration of inner atomic electrons resulting from chemical bonding.     

Charge compensation and oxidation in NaxCoO2−δ and LixCoO2−δ studied by XANES

A comparative study on the oxidation and charge compensation in the A_xCoO_2−δ systems, A=Na (x=0.75, 0.47, 0.36, 0.12) and Li (x=1, 0.49, 0.05), using X-ray absorption spectroscopy at O 1s and Co 2p edges is reported. Both the O 1s and Co 2p XANES results show that upon removal of alkali metal from A_xCoO_2−δ the valence of cobalt increases more in Li_xCoO_2−δ than in Na_xCoO_2−δ. In addition, the data of O 1s XANES indicate that charge compensation by oxygen is more pronounced in Na_xCoO_2−δ than in Li_xCoO_2−δ.     

The effect of pressure on the dissociation constant of hydrofluoric acid and the association constant of the NaF ion pair at 25°C

The effect of pressure on the dissociation constant of hydrofluoric acid was determined by using the indicator technique at 25°C at an ionic strength of 0.1m over a pressure range of 1 to 2000 atm. A value of 3.14 for pK _a ^* at I =0 was obtained by extrapolation to zero ionic strength at 1 atm. The pressure dependence yielded a partial molar volume change of –9.6 cm³-mol^–1 and a compressibility change of — 35×10^–3 cm³-mol^–1 –atm^–1 for the dissociation. The dependence of ionic strength on the association constant K _A ^* of NaF was studied at 25°C and 1 atm. Extrapolation to I=0 yielded a pK _A ^* of –0.78. The pressure dependence of K _A ^* gave a change of volume of 3.26 cm³-mol^–1 and a change in compressibility of 6×10^–3 cm³-mol^–1-atm^–1 for the formation of the ion pair.     

Variational reactive scattering calculations: computational optimization strategies

Summary We have developed efficient and accurate techniques for the calculation of quantum mechanical reaction probabilities of atom-diatom exchange reactions in the gas phase, and we have optimized a computer code employing these techniques and applied it sucessfully to several systems. In this paper we consider further strategies for improving the algorithm to allow even more demanding applications. In this context, improvement means that equivalent results can be obtained using fewer computational resources (computer time or storage) or that an equivalent expenditure of resources can yield higher accuracy. The new strategies discussed here lead to improvement in both of these areas. Two areas of special focus in the present paper are (i) the finite difference boundary value method used for calculating distorted wave Green's functions and regular solutions for scattering by the distortion potential and (ii) the choice of the distortion potential itself. Among other results included here is the first application of the outgoing wave or scattered wave variational principle to reactive scattering.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.