The optimization of silica gel synthesis from chemical bottle waste using response surface methodology

To reduce the amount of hazardous chemical bottle waste in the environment, we report the optimization research of silica extraction in chemical bottle waste into silica gel. Alkali fusion and sol–gel process were utilised to prepare silica gel effectively. The alkali fusion process was carried out by adding sodium hydroxide to produce sodium silicate. Afterwards, silica gel was prepared by the sol–gel method using hydrochloric acid. Box-Behnken Design (BBD) was applied to Optimisation factors the poptimiseactors affecting the silica recovery. The factors that optimised mass ratio, particle size, and temperature. The optimum recovery of silica gel was obtained by SiO₂: NaOH mass ratio of 1:3, the particle size of 63–74 µm, and a temperature of 800 °C. The purity of silica gel optimum is 63.74% characterised using X-ray fluorescence. The structure of silica gel is the appearance of amorphous peaks at 2θ 20-30° characterised using an x-ray diffractogram. The silica gel surface was characterises using scanning electron microscopy-energy dispersive x-ray. It showed an irregular surface and characteristic showed that silica gel had a radius of 15.74 nm and a specific surface area of 297.08 m².     

Probing the Effects of Reagent Gas Pressure and Ion Source Temperature for Dimethyl Ether Chemical Ionization of Tricyclic Antidepressants in an External Source Ion Trap Mass Spectrometer

This study examines the reagent gas pressure and ion source temperature dependence for dimethyl ether chemical ionization (DME CI) mass spectra recorded with an external source ion trap mass spectrometer (ITMS). Information for better controls of the reagent gas pressure in order to obtain fair CI spectra is provided. The origin of M^+? ions observed in DME CIMS is discussed in detail. Furthermore, the ion source temperature effect on the DME CI is also investigated.     

Titanium as a chemical modifier for the determination of cobalt in marine sediments

The determination of cobalt in marine sediments by electrothermal atomic absorption spectrometry was studied using no modifier and magnesium and titanium as modifiers. Titanium is one of the major sediment constituents, which widely affects the cobalt determination and it was studied as a chemical modifier since it was the only concomitant that increased the cobalt signal in the concentration range usually found in sediments. The performance of Mg and Ti as chemical modifiers was compared relative to maximum pyrolysis and atomization temperatures, linear calibration range, sensitivity and matrix effects. The pyrolysis curves showed that the analyte could be stabilized up to 1400 °C when either Ti or Mg(NO₃)₂ was present, while only 1000 °C could be used in the absence of a modifier. The optimum atomization temperature was 2500 °C in all cases. Analytical curves were compared using no modifier, 5 μg Ti and 100 μg Mg(NO₃)₂ as modifiers, and the linear range found was up to approximately 4 ng Co whether a modifier was used or not. With Ti as a chemical modifier, analytical curves for cobalt in aqueous solution and in a synthetic matrix resulted in the same sensitivity (m₀=55 pg), whereas the use of Mg led to characteristic mass values of 59 and 72 pg in aqueous solution and in a synthetic matrix, respectively, showing some matrix effect. The detection limits (3σ, n=10) were 0.4 μg g⁻¹ using no modifier and 0.3 μg g⁻¹ with Ti as a modifier in the original matrix. A reference estuarine sediment NIST 1646 with a non-certified content of 10.5 μg g⁻¹ Co was analyzed and the found value of 10.9±2.4 μg g⁻¹, (n=3), using Ti as chemical modifier and calibration against aqueous standards, was in good agreement with the recommended value.     

Method to determine quadruple points of a two-component system containing a simple hydrate phase and behavior of the system near these points

A method for determining quadruple points of a two-component system containing a simple hydrate phase is proposed. This method utilizes the quasi-static change of the system along three-phase equilibrium lines and was proved to be able to determine the quadruple points as accurately as the conventional method. By using this method, even though some preparation is necessary, a quadruple point can be determined in just a single experimental run. The behavior of the system near the quadruple points was also examined experimentally, for both the quasi-static and the irreversible change cases. At the quadruple points, the temperature and pressure of the system were kept constant for a while, as at the triple point of water. In both cases, the representative point of the state of the system passed through the quadruple point on a p–T diagram.     

聚合物与有机染料多层复合膜电致发光颜色的直流电压调制

聚合物与有机染料多层复合膜电致发光颜色的直流电压调制马於光，薛善华，黄劲松，田文晶，刘式墉，沈家骢，刘晓冬（吉林大学分子光谱与分子结构开放实验室，集成光电子学国家重点实验室，长春，１３００２３）（白求恩医科大学，长春，１３００２３）关键词聚合物，发光...     

A facile preparation of nanocrystalline Mo2C from graphite or carbon nanotubes

Nanocrystalline Mo₂C powders were successfully synthesized at 500 °C by reacting molybdenum chloride (MoCl₅) with C (graphite or carbon nanotube) in metallic sodium medium. X-ray powder diffractometer (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscope (XPS) and surface area analyzer (BET method) were used to characterize the samples. Experiments reveal that the carbon source used for the carbide synthesis has a great effect on the particle size and the surface area of the samples. When micro-sized graphite was used as C source the obtained nanocrystalline Mo₂C powder consists of particles of 30∼100 nm, with a surface area of 2.311 m²/g. When carbon nanotubes were used as C source, the as-synthesized Mo₂C sample is composed of particles of 20∼50 nm, with a surface area of 23.458 m²/g, which is an order of magnitude larger than that of the carbide prepared from the graphite.     

The reaction of phenylarsenazo with chromium(III)

The conditions for the reaction between phenylarsenazo (PAA) (2-[(2-arsonophenyl)azoj-7-(phenylazo)-1, 8-dihydroxynaphthalene-3,6-disulphonic acid) and chromium(III) have been studied. A blue 1:1 complex is formed at pH 2.2 on heating the reactants at 100 degrees for 15 min. It has maximum absorption at 635 nm and is stable for at least 24 hr. The molar absorptivity is 3.3 x 10(4) 1.mole(-1).cm(-1). Beer's law is obeyed in the chromium concentration range 0-1.4 mug ml . The reaction has been successfully applied to determination of chromium in alloy steel.     

Stereochemistry of planarchiral compounds,part X

2,7-Dibromo-1,6-methano[10]anulene (3) and 2,9-Dibromo-syn-1,6:8,13-diimino[14]anulene (9) were quantitatively separated into their enantiomers by chromatography on triacetylcellulose (TAC) in ethanol. X-ray structure analysis (Bijvoet technique) established the chiralities (+)(R)-3 and (+)(S)-9 for the dextrorotatory enantiomers.Comparison of the CD spectra allowed the configurational assignment to further optically active [10] and [14] anulenes which were also accessible by chromatography onTAC. Conversion of (+)(R)-2-bromo-1,6-methano[10]anulene (2) into the corresponding methylester (–)-4 confirmed its previously proposed chirality (–)(R).2,7-Dibromo-1,6-oxido[10]anulene (7) and 2,9-dibromo-syn-diimino[14]anulene (9) are in contrast to the 2,9-dibromo-syn-dioxido[14]anulene (10) optically stable until 250°C. Consequently their inversion barriers are higher than 42 kcal (176 kJ) mol^–1.The CD spectra of mono and disubstituted anulenes (with C₁ and C₂ symmetry, resp.) are compared: For the [10]anulenes theCotton effect around 330 nm seems to be specific for their configuration with a positive effect indicating (S)-chirality and vice versa. Some regularities concerning the chromatographic resolutions are discussed.

---

Stereochemie planar chialer Verbindungen, 10. Mitt.: Röntgenkristallstruktur und absolute Chiralität überbrückter [10]- und [14] Anulene

Zusammenfassung 2,7-Dibrom-1,6-methano[10]anulen (3) und 2,9-Dibrom-syn-1,6:8,13-diimino[14]anulen (9) wurden durch Chromatographie an Triacetylcellulose (TAC) in Ethanol quantitativ in ihre Enantiomeren getrennt. Röntgenstruktur-analyse (Bijvoet-Technik) bewies für die rechtsdrehenden Enantiomeren die Chiralität (+)(R)-3 bzw. (+)(S)-9.Ein Vergleich der CD-Spektren ermöglichte die Konfigurationszuordnung weiterer optisch aktiver [10]- und [14]Anulene, die gleichfalls durch Chromato-graphie anTAC erhalten worden waren. Umwandlung von (+)(R)-2-Brom-1,6-methano[10]anulen (2) in den entsprechenden Methylester (–)-4 bestätigte dessen schon früher vorgeschlagene Chiralität (–)(R).Dibrom-1,6-oxido[10]anulen (7) und Dibrom-diimino[14]anulen (9) sind im Gegensatz zum Dioxido[14]anulen (10) bis 250°C optisch stabil. Ihre Inver-sionsbarrieren liegen somit über 42 kcal (176kJ) mol^–1.Die CD-Spektren von mono- und disubstituierten Anulenen (mit C₁ bzw. C₂-Symmetrie) werden verglichen: Für die [10]Anulene scheint derCottoneffekt um 330 nm konfigurationsspezifisch zu sein, wobei ein positiver Effekt (S)-Chiralität anzeigt — und vice versa. Einige Regelmäßigkeiten bezüglich der chromatographischen Enantiomerentrennung werden diskutiert.

     

CPCWS中水质子的核磁共振自旋晶格弛豫时间和化学位移

运用核磁共振手段，揭示了浆体中水的形态及其动态行为，并研究浆体性质与之的关联.实验测得神府煤-石油焦-水浆（CPCWS）中水质子的化学位移与煤焦中煤的百分含量的线性关系.并从NMR测得束缚水的化学位移δb ，导出计算浆体中束缚水百分含量的公式.从CPCWS中水质子的化学位移与浆体表观粘度的相关曲线可确定最佳配比的浆体.测得全焦浆中水质子自旋-晶格驰豫时间T1比全煤浆大42倍，讨论了CPCWS的T1随煤含量的变化趋势.实验表明,T1可作为CPCWS中碳质点的疏水或亲水性以及水分子形态和动态行为的定量表征.     

Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.