凝胶色谱与多角激光光散射联用研究聚氧化乙烯的扩展效应和链构象

采用凝胶色谱与多角激光光散射联用的方法,测定了一系列不同分子量的聚乙二醇(PEG)和聚氧化乙烯(PEO)在色谱柱中的扩展效应.扩展因子随PEG/PEO分子量的增加而增大,经扩展效应改正后得到了样品的准确分子量和分子量分布.同时建立了PEO的Z均回转半径Rgz与重均分子量Mw之间的单分散标度关系:Rgz=0.0272 Mw0.56,结果表明,长链PEO在水溶液中由于排除体积效应采取溶胀的无规线团构象.     

晶型转变对尼龙11分子链运动的影响

Two crystal forms (α and δ′ form) of nylon 11 were prepared by melting, ice water bath quenching and annealing. The characteristic of chain movement of two forms was investigated using dielectric relaxation spectroscopy in the frequency range from 42 Hz to 5 MHz. The dielectric temperature spectra at different frequencies show that the primary α relaxation corresponding to the chain segment movement is located at higher temperature in α form, indicating the chain segment movement is restricted after δ′→α crystal transition. The activation energy of secondary β relaxation remained almost unchanged for two forms, but the relaxation time was longer and the relaxation strength was weaker for α form, confirming that the local relaxation was also restricted to some extent after δ′→α crystal transition.     

Modification of poly(propylene carbonate) with chain extender ADR-4368 to improve its thermal,barrier, and mechanical properties

Melt blending with the application of epoxy compound ADR-4368 as a chain extender was used to chemically modify polypropylene carbonate (PPC). ¹H nuclear magnetic resonance spectroscopy (¹H NMR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and tests using a universal material testing machine, a gas permeability tester, a water vapor permeability tester and other instruments were used to assess changes in the chemical structure, thermal and mechanical properties, and barrier efficacy of PPC before and after modification.The epoxy group in ADR-4368 reacted with the terminal hydroxyl group in PPC, considerably enhancing its mechanical properties, thermal stability and barrier efficacy to O₂ and CO₂. With the addition of 1% ADR-4368, the glass transition temperature of PPC was increased from 17 °C to 26.9 °C, while the thermal decomposition temperature (T_−5%) of PPC was increased from 177.3 °C to 240.6 °C. Moreover, the tensile strength of the modified PPC was improved from 3.3 MPa to 20.7 MPa.     

一种手性甲壳型液晶高分子的稀溶液行为及链刚性

用激光光散射和粘度法研究了一系列窄分子量分布的新的手性甲壳型液晶聚合物P1～P6的溶液行为及其链刚性.研究发现四氢呋喃是聚合物P1～P6的良溶剂.在四氢呋喃溶液中,聚合物P1～P6的特性粘数[η]和均方根旋转半径z12对重均分子量Mw的依赖关系分别是[η]=(2.75±0.05)×10-3Mw0.78±0.02和z12=(1.53±0.04)×10-2Mw0.60±0.01.按照YamakawaFujiiYoshizaki蠕虫状圆筒模型的粘度理论和BohdaneckyBushin表达式,求得聚合物的单位围长摩尔质量ML=(29.8±1.0)×102nm,构象保持长度q=(15.4±3.0)nm.q和MHS方程指数α的值说明这类在结构上属于侧链型液晶高分子的聚合物在良溶剂四氢呋喃中呈现比较伸展的刚性链构象,其链刚性与半刚性主链液晶高分子的相似.     

Struktur‐ und magnetochemische Untersuchungen an KCuGaF6

Structural and Magnetochemical Studies on KCuGaF₆ The crystal structure of KCuGaF₆ was determined on the base of X‐ray single crystal data (wR₂ = 0.084 for 2476 independent reflections). The compound crystallizes with a = 728.56(4), b = 989.51(6), c = 676.27(3) pm, β = 93.120(5)°, Z = 4 in space group P2₁/c of the pyrochlore related KCuCrF₆ type. The octahedral coordinations [GaF₆] and [CuF₆] are slightly resp. strongly distorted (mean values Ga‐F: 188.2 pm resp. Cu‐F: 188.2/200.1/227.6 pm). The longest distances Ga‐F and the shortest ones Cu‐F are found within octahedral chains of these two kinds of atoms, running along [100] and [001], resp., and being mutually bridged as well (M‐F‐M in between 114 and 145°). The magnetic mole susceptibilities measured at powders and at a single crystal follow the isotropic Heisenberg model for S = ¹/₂, if effects of chain disrupture are considered in the form of some paramagnetic portion. No indication of threedimensional magnetic order is observed down to T = 2 K and low magnetic fields H < 100 G. KCuGaF₆ (J/k = —71 K for the powder) is distinguished this way from the chain structure compounds KCuAlF₆ und Na₂CuScF₇ (J/k = —76 resp. —59 K) which were also magnetically studied and yield similar antiferromagnetic exchange constants J/k.     

Synthesis,Spectroscopic and EPR Results and Crystal Structure of Copper(II) Formato Derivatives with Pyrazine and Dimethylpyrazines

The complexes of copper formato with pyrazine and dimethylpyrazines: Cu(HCOO)₂(pyrz) ( 1 ), Cu₂(HCOO)₄(pyrz) ( 2 ), Cu₂(HCOO)₄(2,3‐Me₂pyrz) ( 3 ), Cu₂(HCOO)₄(2,5‐Me₂pyrz) ( 4 ), and Cu₂(HCOO)₄(2,6‐Me₂pyrz)₂ ( 5 ) have been synthesized and characterized by chemical analysis and IR and electronic spectro scopies. The three‐dimensional structure of compound 1 consists of –Cu–pyrz–Cu–pyrz– chains joined by bridging formate groups coordinated, in configuration syn‐anti, to two copper atoms. The coordination around the copper atom is orthorhombic with two Cu–O distances of 2.374(1) Å, two Cu–O of 1.952 Å and two Cu–N of 2.080 Å. Compound 5 is formed by molecular dimers with the [Cu₂(μ‐HCOO)₄] unit, two copper atoms and four syn‐syn fomate groups, and two ligands coordinated to the copper atoms in the axial positions. In compounds 2 and 3 chains of [Cu₂(μ‐HCOO)₄] dimers with pyrz or 2,3‐Me₂pyrz as bridging ligands are formed. The EPR signal of 1 is orthorhombic (g = 2.23, 2.20 and 2.06). In the EPR spectra of 2 – 5 compounds the triplet (S = 1) signals are observed. The g_?, g_∥ and D values are been calculated.     

Flocculation of dilute titanium dioxide suspensions by graft cationic polyelectrolytes

The flocculation of a dilute titanium dioxide (TiO₂) suspension using homopolymers and graft copolymers of acrylamide (AM) and diallyldimethylammonium chloride (DADMAC) was investigated. The graft copolymers produced by γ-irradiating the mixtures of polyacrylamide (PAM) and polyDADMAC gave better flocculating performance than homopolymers, reflecting the higher fractions of large particles and bigger floc size. A kinetic delay in the onset of flocculation was observed after adding the copolymers in the dose range 5–30 [mg polymer]/ [g TiO₂]. Increasing dosage resulted in a longer delay period. No significant flocculation was observed when the dose was above 50 [mg polymer]/[g TiO₂]. This delay was interpreted in terms of the re-conformation of polymer chains driven by charge neutralization, between the positively charged polymer branches and the negative particle surface. Depending on the dosage used, the flocculation behavior of the graft copolymer has been suggested to be equilibrium and non-equilibrium flocculation. It was also observed that re-conformation is not affected by the ion strength of the media, but a strong shear force significantly reduces the chain reconformation time. Received: 9 April 1998 Accepted in revised form: 28 August 1998     

Study on antimony oxide self-assembled inside HZSM-5

Sb/ZSM-5 was obtained by solid-state reaction with the mixture of Sb₂O₃ and zeolite HZSM-5 under a dry nitrogen flow at 773 K. Characterization of the treated zeolite was undertaken with XRD, ²⁷Al MAS NMR, BET, TGA and FT-IR. The results revealed that part of the antimony oxides migrated into the channels of zeolite, and decreased the Brönsted acid sites in Sb/ZSM-5 remarkably. The other part of antimony oxides together with the amorphous alumino-silicate in the products distributed on the external surface of zeolite ZSM-5 and modified it, while the framework of ZSM-5 in crystal phase was retained. The structure of occluded antimony oxide inside the channels of ZSM-5 was studied by XRD Rietveld method. The result showed that their structure can be described as a chain of non-perfect [Sb₅O₅(H₂O)₂]_n⁵ⁿ⁺, which is parallel to the straight channel of ZSM-5. There is about 0.6 [Sb₅O₅(H₂O)₂]⁵⁺ unit in every cell of the ZSM-5 on an average.     

Kinetics of radical telomerization of vinylidene fluoride in the presence of CCl3Z chain transfer agents

The kinetics of radical telomerization of VDF at 141 °C, initiated by ditertbutylperoxide, in the presence of three chain transfer agents (CTAs), HCCl₃, CCl₄ and CCl₃Br, are presented. The values of the chain transfer constants were assessed as 35, 0.25 and 0.06 at 141 °C for CCl₃Br, CCl₄ and HCCl₃, respectively. The values of the degree of polymerization (DP_n) were obtained for each CTA and were compared for the same CTA concentration. Hence, CCl₃Br behaved as an efficient CTA towards VDF and usually afforded the monoadduct selectively, but in certain conditions the VDF diadduct can also be produced. In contrast, HCCl₃ was not so efficient since a polymeric structure was identified as the major product.     

Synthesis and characterization of new strontium 4-carboxyphenylphosphonates

Several new strontium 4-carboxyphenylphosphonates, i.e., two modifications of Sr(HOOCC₆H₄PO₃H)₂, SrH(OOCC₆H₄PO₃)·H₂O, Sr₃(OOCC₆H₄PO₃)₂·4H₂O and Sr₃(OOCC₆H₄PO₃)₂·5.7H₂O were prepared and characterized by elemental analysis, thermogravimetry, X-ray powder diffraction and infrared spectroscopy. It was found that the compositions of these compounds depend on the acidity of the reaction medium. In addition, the presented compounds are interconvertible in dependence on pH. The position of the acid hydrogen atom in SrH(OOCC₆H₄PO₃)·H₂O was determined from the IR spectra of the studied compounds.The structure of the β modification of Sr(HOOCC₆H₄PO₃H)₂ was solved from its X-ray powder diffraction pattern using an ab initio method (the FOX program) with subsequent Rietveld refinement in the FULLPROF program. The compound is monoclinic, with the space group P2₁/c (No. 14), a=49.88(2), b=7.867(2), c=5.602(3) Å, β=128.68(2)°, and Z=4. It has a one-dimensional structure with an inorganic part built of SrO₈ distorted tetragonal antiprisms.