The stability of poly(m-carborane-siloxane) elastomers exposed to heat and gamma radiation

Poly(m-carboranyl-siloxane) elastomers containing a mixture of di-methyl- and methylphenyl-silyl units were synthesised using the ferric chloride catalysed condensation reaction between di-chloro-diorganosilane and bis(di-methylmethoxysilyl)-m-carborane. These elastomeric materials were originally developed to have greater stability to extreme thermal environments and retain tailorable physical and chemical properties relative to comparable non-carborane containing elastomers. Prepared samples were aged either by heating in air at elevated temperatures or by gamma irradiation from a ⁶⁰Co source. Multinuclear (¹H, ¹³C and ¹¹B) solid and solution state nuclear magnetic resonance (NMR) was used to assess degradation. This included measurements of segmental chain dynamics using a solid-echo pulse sequence reflecting changes in crosslink density and assessing changes to the carborane fragment by ¹¹B and ¹H Magic Angle Spinning (MAS) methods. Thermogravimetric measurements were also performed to assess thermal stability. Gamma radiation (to a dose of 1 MGy) was found to induce only a small degree of elastomer hardening as evidenced by a reduction in segmental chain dynamics. The carborane cage however, remained intact at these dose levels. Thermal degradation was observed to lead to oxidative crosslinking, the degree of which is dependent on temperature. At temperatures below 350 °C, only small changes in segmental dynamics were observed commensurate with only minor weight loss at this temperature. At temperatures above 350 °C, the degradation of the elastomer increased dramatically with decreased segmental dynamics and presumed partial oxidation of the carborane cage. The integrity of the m-carborane cage and the segmental dynamics were found to be significantly reduced at temperatures above 580 °C, in line with the known cage rearrangement temperature for icosahedral carboranes.     

VDF/CTFE共聚物原子转移自由基反应法氢化制备VDF/TrFE/CTFE三元共聚物的研究

报道了一种用于偏氟乙烯-三氟氯乙烯共聚物(VDF/CTFE共聚物)制备偏氟乙烯/三氟乙烯/三氟氯乙烯共聚物(VDF/TrFE/CTFE共聚物)的新方法,该方法以CuCl与2′,2-Bpy的配合物为催化剂,N-甲基吡咯烷酮(NMP)为溶剂,异丙苯(丙酮、2,6-二叔丁基-4-甲基苯酚)为链转移剂,通过原子转移法在VDF/CTFE共聚物上产生自由基,进而利用自由基链转移反应将VDF/CTFE共聚物上部分Cl原子用H原子取代以制备VDF/TrFE/CTFE三元共聚物.对该体系的反应机理及其影响因素进行研究发现,随着实验温度的升高(80～140℃),反应时间的延长,氢化量增加,产物中TrFE含量增加;反应温度越高,初始反应速度越快,完全氢化时间越短;催化剂与氢化量的比例基本为1:1,通过控制催化剂的量可以定量控制氢化率;新的反应体系不会对产物的分子量产生大的影响.     

Synthesis,Spectroscopic and EPR Results and Crystal Structure of Copper(II) Formato Derivatives with Pyrazine and Dimethylpyrazines

The complexes of copper formato with pyrazine and dimethylpyrazines: Cu(HCOO)₂(pyrz) ( 1 ), Cu₂(HCOO)₄(pyrz) ( 2 ), Cu₂(HCOO)₄(2,3‐Me₂pyrz) ( 3 ), Cu₂(HCOO)₄(2,5‐Me₂pyrz) ( 4 ), and Cu₂(HCOO)₄(2,6‐Me₂pyrz)₂ ( 5 ) have been synthesized and characterized by chemical analysis and IR and electronic spectro scopies. The three‐dimensional structure of compound 1 consists of –Cu–pyrz–Cu–pyrz– chains joined by bridging formate groups coordinated, in configuration syn‐anti, to two copper atoms. The coordination around the copper atom is orthorhombic with two Cu–O distances of 2.374(1) Å, two Cu–O of 1.952 Å and two Cu–N of 2.080 Å. Compound 5 is formed by molecular dimers with the [Cu₂(μ‐HCOO)₄] unit, two copper atoms and four syn‐syn fomate groups, and two ligands coordinated to the copper atoms in the axial positions. In compounds 2 and 3 chains of [Cu₂(μ‐HCOO)₄] dimers with pyrz or 2,3‐Me₂pyrz as bridging ligands are formed. The EPR signal of 1 is orthorhombic (g = 2.23, 2.20 and 2.06). In the EPR spectra of 2 – 5 compounds the triplet (S = 1) signals are observed. The g_?, g_∥ and D values are been calculated.     

菌类多糖链构象及其表征方法研究进展 （专题报道）

 概述了菌类多糖在溶液中链构象及其表征方法的研究进展.主要报道从各种真菌（香菇、茯苓、灵芝、木耳、黄单胞菌、裂褶菌等）中提取的多糖在溶液中的分子量、分子形态和尺寸,即链构象.同时介绍多糖链构象对生物活性的影响,并且指出多糖刚性链带电基团及适量分子量有利于促进它与免疫细胞上受体结合,从而抑制肿瘤细胞增殖.由此表明,多糖链构象的研究对弄清其生物功能和推动生命科学发展十分重要.多糖在溶液中主要以无规线团、双螺旋、三螺旋、蠕虫状、棒状链以及聚集体构象存在,它取决于单糖组成、糖苷键、支链结构以及分子内和分子间作用力.测定链构象的方法主要包括光散射、黏度、显微技术（透射电镜,扫描电镜以及原子力显微镜）、微量热法和小角X-射线散射等.此外,介绍了多糖溶液理论以及计算链构象参数的表达式.     

高分子单链凝聚成与线团相互穿透的多链凝聚态

高分子单链凝聚态由于链内链结构单元间存在范德化吸引作用,高分子链呈打圈链构象,而多链凝聚态由于链内链单元间的吸引作用被与相互穿透的近邻链的单元间吸引作用所屏蔽,高分子链呈高斯链构象。本文简要介绍单链凝聚态试样的制备方法,单链单晶体、单链玻璃体、溶胀的单链高弹态拉伸等的实验观察,并提出从单链凝聚态到多链凝聚态的转变过程问题,即高分子线团的相互穿透过程,目前还缺少基础了解。     

Investigation on novel thermoplastic poly(urethane-thiourea-imide)s with enhanced chemical and heat resistance

A new generation of segmented thermoplastic poly(urethane-thiourea-imide)s (PUTIs) was synthesized via reaction of polyethylene glycol and thiourea-based prepolymer with dianhydride as chain extenders. NCO-terminated prepolymer was synthesized from a new diisocyanate, 3-(3-((4-isocyanatophenyl)carbamoyl)thioureido)phenyl-4-isocyanatophenylcarbamate (IPCT), as a hard segment and PEG forming soft segment. The starting materials and polymers were characterized by conventional methods and physical properties such as solubility, solution viscosity, molecular weight, thermal stability and thermal behavior were studied. PUTIs showed partially crystalline structures. Weight average molecular weights of PUTIs (GPC measurements) were in the range of 1,68,694-1,97,035. Moreover, thermogravimetric analysis indicated that poly(urethane-thiourea-imide)s were fairly stable above 500 °C having T₁₀ of 521-543 °C. Investigation of the results authenticated the approach of introducing thiourea (using IPCT) and imide structure in polyurethanes for the improvement of thermal stability. In comparison to typical polyurethanes, these polymers exhibited better heat resistance, chemical resistance as well as processability.     

二胺扩链剂对RIM聚氨酯－脲弹性体的结构与性能的影响

采用实验室小型ＲＩＭ机制备了一组不同芳香二胺扩链的嵌段聚氨酯－脲（ＰＵＵ）弹性体，借助于ＩＲ、ＤＳＣ、ＤＭＴＡ、ＳＥＭ以及拉伸试验等测试手段对其结构与性能进行了研究．通过比较由ＭＤＡ、ＤＥＴＤＡ以及ＣＡＭＤＡ三种不同活性和结构的芳香二胺扩链剂与二异氰酸酯反应形成的硬链段对ＲＩＭＰＵＵ弹性体的结构与性能的影响，表明：ＭＤＡ基ＲＩＭＰＵＵ中软、硬链段微区界面作用指数很小，微相分离程度却很大，其性能最差；ＤＥＴＤＡ基ＲＩＭＰＵＵ弹性体有理想的界面作用指数，以及适当的微相分离程度，其性能位于三者之中最佳．ＤＭＴＡ研究证实在一定的温度范围内ＤＥＴＤＡ基ＲＩＭＰＵＵ的模量稳定性最好．     

大分子引发－转移－终止剂

大分子引发－转移－终止剂杨文君，李俊柏，沈家骢（青岛化工学院橡塑工程研究所，青岛，２６６０４２）（吉林大学化学系，长春，１３００２３）关键词聚苯乙烯，聚丙烯酰胺，嵌段共聚，扩链反应，引发－转移－终止剂含有二乙基二硫代氨基甲酸基的有机硫化物或大分子，在...     

聚对苯二甲酸乙二醇酯和聚对苯二甲酸丁二醇酯化学扩链反应

综述了用于聚对苯二甲酸乙二醇酯（ＰＥＴ）、聚对苯二甲酸丁二醇酯（ＰＢＴ）化学扩链反应的羧基加成型和羟基加成型扩链剂，以及缩合型扩链反应、羧基加成型扩链反应和羟基加成型扩链反应、羧羟基同时加成型扩链反应。讨论了扩链反应、反应特性和扩链产物的性能，并简要介绍了国内研究概况。参考文献２０篇。     

以双硫酯为链转移剂的活性自由基聚合

合成并研究了两种双硫酯链转移剂的纯化方法 ,进行了多种单体以双硫酯为链转移剂的活性自由基聚合及嵌段共聚 .发现以PhC(S)SC(CH3) 2 Ph为链转移剂的效果比PhC(S)SCH(CH3)Ph好 ,聚合产物的多分散性系数较小 .引发剂与链转移剂的摩尔数比为 1∶3 5～ 1∶4 2时 ,得到多分散性系数小 ,实测分子量与理论分子量相近的聚合产物 .聚合物的分子量随时间和转化率的增加而增加 ,加入第二单体形成嵌段共聚物 ,具有活性聚合特征 .聚甲基丙烯酸酯大分子引发剂引发丙烯酸酯单体聚合时 ,聚合速度最快 .