Pharmacokinetic detection of penicillin excreted in urine using a totally internally reflected resonance light scattering technique with cetyltrimethylammonium bromide

A quantitative analysis method for penicillins including ampicillin (AmP), benzyl penicillin (BP), oxacillin (OA) and amoxycillin (AmO) is proposed that makes use of the totally internally reflected resonance light scattering (TIR-RLS) signal from the penicillin at the H₂O/CCl₄ interface in the presence of cetyltrimethylammonium bromide (CTMAB), and enables the pharmacokinetics of penicillin taken orally and excreted through urine to be monitored. Penicillin is coadsorbed with CTMAB at the H₂O/CCl₄ interface in neutral solution, resulting in the formation of ion associates that display greatly enhanced TIR-RLS signals (maximum at 368–372 nm). This enhanced TIR-RLS intensity was found to be proportional to the penicillin concentration over the range 0.2×10^–6 to 2.2×10^–6 mol L^–1, with limits of determination (3) of 5.0×10^–8 to 7.0×10^–8 mol L^–1. Pharmacokinetics studies performed using the present method show that the excretion of orally-taken ampicillin through urine has a half-time of 1.05 h and an excremental quantum over 8 h of 49.3%, respectively.     

Volumes,heat capacities and solubilities of amyl compounds in decyltrimethylammonium bromide aqueous solutions

Apparent molar heat capacities and volumes of amylamine (PentNH₂) 0.02m, capronitrile (PentCN) 0.02m and nitropentane (PentNO₂) 0.009m in decyltrimethylammonium bromide (DeTAB) micellar solutions, in water and in octane were measured at 25°C. By assuming that their concentration approaches the standard infinite dilution state, heat capacities and volumes were rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase and heat capacity and volume of the additives in both phases are simultaneously derived. The present results are compared to those we have previously obtained for pentanol (PentOH). The thermodynamic properties of PentNH₂ in water and in micellar phase are substantially identical to those of PentOH but different from those of PentCN and PentNO₂ whereas the opposite behavior was observed in their pure liquid state and in octane. The nature of the solvent medium seems to affect the thermodynamic behavior of PentNH₂. Also, the study of the apparent molar heat capacities of the amyl compounds investigated here in micellar solutions as a function of surfactant concentration shows evidence of a maximum at about 0.4m DeTAB, which can be attributed to a micellar structural transition. Accordingly, the solubilities of PentCN and PentNO₂ as a function of the DeTAB concentration drop in the neighborhood of the concentration where heat capacities display the maximum.     

Interaction of the mutagen ethidium bromide with DNA, using a carbon paste electrode and a hanging mercury drop electrode

The interaction of ethidium bromide (2,7-diamino-10-ethyl-9-phenylphenanthridinium bromide; EB) with double stranded (ds) calf thymus DNA and thermally denatured single stranded (ss) DNA was studied in solution and at the electrode surface by means of transfer voltammetry using a carbon paste electrode (CPE) as working electrode in 0.2 M acetate buffer, pH 5.0. As a result of intercalation of this dye between the base pairs of dsDNA, the characteristic peak of dsDNA, due to the oxidation of guanine residues, decreased and after a particular concentration of EB a new peak at +0.81 V appeared, probably due to the formation of a complex between dsDNA and EB. The non-intercalated EB gives another peak, but at an increased concentration of the dye. A similar behaviour was observed during the interaction of the dye with ssDNA.Furthermore, the interaction of EB with ds, ss and supercoiled (sc) DNA was studied at the hanging mercury drop electrode (HMDE) surface by means of alternating current voltammetry in 0.3 M NaCl and 50 mM sodium phosphate buffer (pH 8.5) as supporting electrolyte. dsDNA yields a smaller peak at −1.42 V (peak III) compared to the one yielded by ssDNA, since the latter is a relaxed and more accessible form. By addition of EB into the buffer solution an increase of peak III was observed in the dsDNA form as well as in ssDNA resulting from their interaction with EB. Furthermore, the appearance of peak III in covalently closed circular scDNA after exposure to increasing concentrations of EB is a result of the introduction of ‘free ends’ in DNA affecting its structural integrity.     

TBAB修饰的负载型Wacker催化剂催化甲醇羰基化合成碳酸二甲酯

自 1 95 9年 Smidt等 [1]发现均相 Pd Cl2 - Cu Cl2 体系可高效率直接选择性氧化乙烯制乙醛以来 ,Wacker催化过程已成为乙醛工业生产的主要方法 .为解决 Wacker催化体系腐蚀性强及催化体系与产物难以分离等弊端 ,将均相 Wacker(Pd Cl2 - Cu Cl2 )催化剂固载化成为备受关注的研究课题[2 ] .多相Wacker催化剂不仅成功地应用于选择性氧化低碳烯烃制醛和酮 [3 ,4 ] ,还用于 CO深度氧化 [5～ 7] .碳酸二甲酯 (DMC)的合成与应用研究是目前绿色化学前沿课题 .在众多的 DMC合成方法中 ,常压气相法因其工艺简单、对设备无腐蚀以及产品易分离…     

伯溴代烷的微波快速合成法

198 6年Ｒ .Ｊ.Ｇｉｇｎｅｒｅ[1 ] 和Ｒ .Ｇｅｄｙｅ[2 ] 首次报道将微波用于有机合成反应以来 ,大量实验事实证明[3] 微波不仅能极大地提高某些化学反应速率 ,而且能使一些在常规加热条件下几乎不能进行的反应得以完成、获得满意的收率。用伯醇在溴化氢溶液中微波条件下发生反应制备了伯溴代烷。1　实验部分ＷｈｉｒｌｐｏｏｌＴ1 2 0Ｘ微波炉 (四川大学无线电系改装 ,可连续发射微波 ,功率连续可调 )、ＷＺＳ -Ｉ阿贝折光仪 (未校正 )。工业溴化氢 (Ｃ =40 % ,ｄ =1 38) ,其余试剂均为ＣＰ级。合成通法　将适量的醇、一定量的浓硫酸和过…     

巯嘌呤金属配合物与小牛胸腺DNA的作用

用溴化乙锭为探针研究了巯嘌呤(mercaptopurine, MP)金属配合物与小牛胸腺 DNA的作用机制，探讨了其作用模式，即巯嘌呤与DNA是非嵌插结合，巯嘌呤金属酴 物与DNA之间的作用为静电方式和一定的嵌入方式。并求得巯嘌呤金属配合物与 DNA的结合常数。     

季铵盐用于示波极谱滴定法测定培氟沙星和环丙沙星

介绍采用季铵盐 十六烷基三甲基溴化铵作滴定剂的示波极谱滴定法测定培氟沙星和环丙沙星含量的方法。在pH 4 .8HAc NaAc缓冲溶液中 ,培氟沙星和环丙沙星均能与四苯硼钠 (Na TPB)作用生成沉淀 ,干过滤后 ,用十六烷基三甲基溴化铵标准溶液代替在示波极谱滴定法中常用的有毒硫酸亚铊作为滴定剂 ,回滴滤液中过量的Na TPB ,由示波极谱图 [dE dt=f(E)曲线 ]上TPB的切口消失指示终点。本法终点直观、灵敏 ,操作简便、快速 ,应用于多批原料药样品的测定 ,均获得满意的结果 ,其回收率在 99.9%～ 10 0 .3%之间 ,最大相对误差 <± 0 .3% ,与非水滴定法测得结果基本吻合。     

维生素K1合成的改进

维生素K1分子侧链上有一双键，因而存在几何异构体．天然维生素K1是2，3一反式构型，合成品为顺式和反式异构体的混合物，而顺式异构体几乎没有生理活性．故此，八十年代以后，各国药典均对维生素K；顺式异构体规定了限量，中国药典（1995版）规定顺式异构体的含量不得超过ZI．0％［’］．目前国内流行的制备方法是以甲素配为起始原料，须经还原、乙酸化、水解、缩合、再水解和氧化五步反应制得［’］，步骤长、收率低、对环境污染大．而用异植物酶合成引人侧链时，制备的维生素K；顺式异构体含量较高，达不到药典要求．为满足新版药典的…     

New Hexazirconium Clusters Containing Hydrogen Atoms

Reduction of ZrBr₄ with HSnBu₃ yielded a blue solid. When this blue solid was treated with PMe₃, a hexanuelear cluster [Zr₆Br₁₄H₄( PMe₃)₄] (2) was isolated. Reaction of the blue solid with [PPh₄]Br in CH₂Cl₂ resulted in the formation of a paramagnetic and unstable cluster anion, [Zr₆Br₁₈H₅]^2– (3), which disproportionated to form a new cluster anion, [Zr₆Br₁₈H₅]^3– (4) and some Zr(IV) species. Compounds containing 4 can also be obtained from reaction of the blue solid with Br^– in MeCN. Reduction of ZrCl₄ with HsnBu₃ gave a red–brown solid, and [Zr₆Cl₁₄H₄(AsMe₃)₄] (9) and [Zr₅Cl₁₂H₄(AsMe₃)₅](8) were obtained by reaction of the red–brown solid with AsMe₃. No cluster compounds containing amine ligands were obtained in the reaction of the red–brown solid with amines; only compounds containing the [Zr₆Cl₁₈ H₅]^3– anion and ammonium cations were isolated. Altogether ten products were characterized by single crystal X-ray diffraction and where possible, by ¹H NMR studies.