Ag@AgBr光催化剂的制备及其可见光催化降解亚甲基蓝反应性能

采用沉积-沉淀及光还原法制备了Ag@AgBr等离子体光催化剂,利用X射线衍射、扫描电镜和紫外-可见漫反射光谱对其进行了表征,并考察了该等离子体光催化剂在可见光(λ＞420nm)下的催化性能,探讨了催化剂用量、pH值、亚甲基蓝初始浓度、H2O2添加量、循环使用及捕获剂对Ag@AgBr催化性能的影响.结果表明,当亚甲基蓝的初始浓度为10mg/L,催化剂用量为1g/L,pH=9.8时,光照12min后,亚甲基蓝的降解率高达96％,且样品经5次循环使用后活性基本保持不变;而少量H2O2的添加对光催化活性影响不大,过量的H2O2会降低光催化活性;乙二胺四乙酸捕获空穴后比异丙醇捕获·OH后的光催化活性降得     

Synthesis of Novel 1,2,3,4-Tetrahydrocarbazole Derivatives of Biological Interest

2-Cyano-N-(tetrahydrocarbazole)acetamide (1) was utilized for the synthesis of several new arylazocarbazole derivatives (2a–e). Compound (1) reacted with phenyl isothiocyanate to yield the corresponding non-isolable intermediate (3), which gave, upon treatment with dilute hydrochloric acid, thiocarbamoyl derivative (4). Compound (3) reacted with chloroacetone, chloroacetic acid, chloroacetyl chloride, ethyl bromoacetate, and phenacyl bromide to afford thiazolone derivatives (6), (8), and (10), respectively. Compound (1) was heated in the presence of pyridine and/or hydrazine hydrate and/or isatine to give the corresponding tetrahydrocarbazole derivatives (13), (14), and (18), respectively.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Novel Iodine Reagent System for Regioselective Cleavage of Epoxides to Alcohols

Epoxides are converted regioselectively to corresponding higher substituted alcohols with greater yields using diphosphorus tetraiodide (P₂I₄) as a reducing agent and a catalytic amount of tetraethylammonium bromide at room temperature.     

Synthesis of Aromatic Aldehydes by a Fast Method Involving Kornblum's Reaction

Aromatic aldehydes were synthesized by oxidation of corresponding halides with dimethyl sulfoxide on potassium bicarbonate by microwave irradiation. Short reaction time and high yields were obtained.     

Synthesis, characterization and mechanism of cetyltrimethylammonium bromide bilayer-encapsulated gold nanosheets and nanocrystals

Single-crystal Au nanosheets and fcc gold nanocrystals of uniform size were synthesized by a novel and simple route. The results of field-emission scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) indicated the formation of the single-crystal structure of gold nanosheets and fcc nanocrystals. Energy-dispersive analysis of X-ray (EDAX) showed absorbance of cetyltrimethylammonium bromide (CTAB) molecules onto the surface of gold nanostructures. Moreover, zeta potential measurements showed that CTAB-coated nanostructures were positively charged and the zeta potential remained almost the same upon centrifugation and redispersion of the resulting nanostructures in methanol, confirming the high stability of the surfactant-protected nanocomposites. Evolution of the nanostructures during the reaction was monitored by TEM observations. The results indicated that the formation of the gold nanostructures followed a two-step mechanism with a bilayer CTAB structure on the surface of the gold nanostructures.     

Stopped-flow kinetic method for the fluorimetric determination of DNA traces in biological samples based on the interaction long-wavelength fluorophor, surfactant and nucleic acid

A simple and rapid method for the determination of DNA, involving the interaction between a surfactant, a long-wavelength fluorophor (LWF) and the nucleic acid, is presented. Different chemical systems based on the local effective charge of the surfactant/LWF system with DNA were tested, choosing cetyltrimethyl ammonium bromide (CTAB) and indocyanine green (ICG) for the development of the method. The fluorescence of ICG increases in the presence of CTAB, but it rapidly decreases in the presence of deoxyribonucleic acid. The initial reaction-rate (v₀) and signal at a prefixed-time (ΔIF₂₀) are monitored at 780 and 802 nm as excitation and emission wavelengths, respectively, using stopped-flow mixing technique, which makes the method applicable to automate routine analysis. Each measurement was obtained in about 30 s, being the integration time 0.1 s. The dynamic range of the calibration graph was 10-1500 ng mL⁻¹, with a detection limit of 5 ng mL⁻¹. The precision of the method, expressed as relative standard deviation, ranged between 2.1% and 4.5%. After a sample treatment consisting on a conventional extraction, the method was applied to the determination of DNA in several samples from different biological materials.     

Enthalpies of dilution of electrolyte solutions by flow microcalorimetry

The enthalpies of dilution of NaCl, Me₄NBr, andn-Bu₄NBr were measured in water at 25°C with a new flow microcalorimeter. The data were analyzed with a polynomial equation, and the derived relative apparent molal enthalpies _L are in good agreement with literature values. Provided care is taken that mixing is complete, flow calorimeters are as reliable and much less time-consuming than cell-type instruments for enthalpies of dilution measurements.     

Analysis of propantheline bromide and related quaternary ammonium drugs by reversed-phase,ion-pair liquid chromatography with two counterions in the eluent

Summary The addition of appropriate concentrations of an organic amine and an alkylsulphonate to the mobile phase in reversed-phase, ion-pair liquid chromatography can introduce unique selectivity in to the chromatographic system allowing separation of complex mixtures of basic, acidic and neutral compounds. As an example, the methodology for a specific stability-indicating determination of propantheline bromide, a quaternary ammonium anticholinergic agent, on several reversedphase stationary phases, was developed. The retention mechanism was studied and it was concluded that both ion-interaction processes and ion-exchange processes were involved in the separation technique developed with two counterions of opposite charge in the eluent.     

Separation of Hydroxybenzoic Acid Isomers by Capillary Zone Electrophoresis

Abstract

Capillary zone electrophoresis is a highly efficient analytical technique that has been shown to be particularly useful for the analysis of isomers. Using a cathodic injection and anodic detection scheme, ortho-, meta- and para-hydroxybenzoic acids were separated in a fused-silica capillary column with a phosphate buffer at pH 10.3 (25.0 mmol/1 phosphate + 0.20 mmol/1 cetyltrimethylammonium bromide (CTAB) + 10% (v/v) 1-propanol with an applied voltage of 10 KV followed by direct UV detection. The use of CTAB as electroosmotic flow modifier allows the rapid separation of the three isomers by reversing the direction of electro-osmotic flow. The influence of pH, CTAB concentration and organic solvents on the migration behaviour of the solutes were also studied.     

Towards Controlled Graft Polymerization of Poly[styrene‐co‐(maleic anhydride)] on Functionalized Silica Mediated by Oxoaminium Bromide Salt. Facile Synthetic Pathway Using Nitroxide Chemistry

A TEMPO bromide salt is used to functionalize a silica surface with nitroxyl moieties. The functionalization reaction takes place in 48 h under mild conditions. In a second step, grafts of styrene‐maleic anhydride copolymer are grown from the functionalized silica surface by heating it in the presence of the monomers. FT‐IR and TGA analysis show that the silica was first functionalized with nitroxide moieties, and then that grafts of styrene‐maleic anhydride grew from the functionalized silica surface. A reaction mechanism is proposed in order to explain the findings. The results suggest that the oxoaminium salts are good candidates for the functionalization and grafting of surfaces that contain hydroxy groups and for the generation of hybrid materials with improved properties.