Influence of imide functionalized organo‐modified Mg‐Al layered double hydroxide on the thermal and mechanical properties of new aliphatic‐aromatic poly (amide‐imide)

A new dicarboxylic acid modified Mg‐Al LDH (DLDH) containing imide groups was prepared and its effects on the thermal and mechanical properties of the new synthesized aliphatic‐aromatic poly (amide‐imide) (PAI) were investigated via preparation of PAI/nanocomposite films by solution casting method. The results of X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) showed a uniform dispersion for LDH layers into the PAI matrix. For comparison, the effects of polyacrylic acid‐co‐poly‐2‐acrylamido‐ 2‐methylpropanesulfonic acid (PAMPS‐co‐PAA) modified Mg‐Al LDH (ALDH) on the PAI properties were also studied. The thermogravimetric analysis (TGA) results exhibited that the temperature at 5 mass% loss (T₅) increased from 277 °C to 310 °C for nanocomposite containing 2 mass% of DLDH, while T₅ for nanocomposite containing 2 mass% of ALDH increased to 320 °C, along with the more enhancement of char residue compared to the neat PAI. According to the tensile test results, with 5 mass% DLDH loading in the PAI matrix, the tensile strength increased from 51.6 to 70.8 MPa along with an increase in Young's modulus. Also the Young's modulus of PAI nanocomposite containing 5 mass% ALDH reduced from 1.95 to 0.81 GPa.     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

高中化学创新实验课程的设计与实施*

将学生所学的化学理论知识与生活实际和学科最前沿的研究热点相结合,开发并实施了 “氢氧化镁纳米材料的制备及其在处理重金属废水中的应用” 创新实验课程。该课程通过文献调研、方案设计、实验操作、结果与讨论以及论文撰写等环节,激发学生的创新潜能,系统培养学生的创新综合素质和责任意识,这有助于更好地达成化学学科核心素养。     

Mechanochemical synthesis of PbS/Ni–Cr layered double hydroxide nanocomposite

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

Modified Preparation of 99mTe-Iron Hydroxide Macroaggregate (99mTe-Fe-(OH)2MA)

A modified method for preparing ^99mTc-FHMA for pulmonary studies is elabrated. It includes a new antioxidant sodium metabisulphite. The optimum conditions for the reparation are given. A simple and rapid procedure with a yield more than 98% is described which eliminates a further purification step.     

Flammability and Thermal Oxidative Degradation Kinetics of Magnesium Hydroxide and Expandable Graphite Flame Retarded Polypropylene Composites

The flammability and the thermal oxidative degradation kinetics of expandable graphite (EG) with magnesium hydroxide (MH) in flame‐retardant polypropylene (PP) composites were studied by limiting oxygen index (LOI), UL‐94 test, and thermogravimetric analysis (TGA). The results show that EG is a good synergist for improving the flame retardancy of PP/MH composite and the effect is enhanced with decreasing EG particle size. The Kissinger method and Flynn‐Wall‐Ozawa method were used to determine the apparent activation energy (E) for degradation of PP and flame retarded PP composites. The data obtained from the TGA curve indicate that EG markedly increases the thermal degradation temperature of PP/MH composites and improves the thermal stability of the composites. The kinetic results show that the values of E for degradation of flame retarded PP composites is much higher than that of neat PP, especially PP/MH composites with suitable amount of EG, which indicates that the flame retardants used in this work have a great effect on the mechanisms of pyrolysis and combustion of PP.     

First Synthesis of 1,3-Alternate 25,27-Dialkyloxy-5,17-diarylcalix[4]arenes-crown-6 as New Cesium Selective Extractants by Suzuki Cross-coupling Reaction

The synthesis of new 25,27-dialkyloxy-5,17-diarylcalix[4]arenes-crown-6 1a–f in 1,3-alternate conformation by Suzuki cross-coupling reaction is reported. Their conformation was determined using ¹H, ¹³C, 2D NMR and ROESY analysis, and X-ray crystallography. Extraction experiments using a two-phase solvent method involving sodium, potassium or cesium picrate showed good extraction of the cesium cation. The X-ray crystal structures of 1,3-alternate 25,27-dipropoxy-5,17-diphenylcalix[4]arene-crown-6 ether 1a and its cesium picrate complex were established. Solid-state data were used to determine the complexation behavior of these new ligands. The efficiency of calixarenes 1a–f for cesium ion extraction could be ascribed to the rigidity and flatness linkages caused by the aryl groups at the lower rim of the aromatic moieties in the calixarene skeleton. In addition, the introduction of these aromatic moieties in positions 5 and 17 enhanced the solubility of the metal complexes in organic media.     

Triton-B-Catalyzed,Efficient, One-Pot Synthesis of Dithiocarbazates Through Alcoholic Tosylates

A quick, efficient, one-pot synthesis of dithiocarbazates was accomplished in high yields by the reaction of various tosylates of primary, secondary, and tertiary alcohols with a variety of substituted hydrazines using the benzyl–trimethylammonium hydroxide (Triton-B)/CS₂ system. The reaction conditions are mild with simpler workup procedures than the reported methods.     

Nonisothermal crystallization and morphology of poly(butylene succinate)/layered double hydroxide nanocomposites

Biodegradable poly(butylene succinate) (PBS) and layered double hydroxide (LDH) nanocomposites were prepared via melt blending in a twin-screw extruder. The morphology and dispersion of LDH nanoparticles within PBS matrix were characterized by transmission electron microscopy (TEM), which showed that LDH nanoparticles were found to be well distributed at the nanometer level. The nonisothermal crystallization behavior of nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. The crystallization rate of PBS was accelerated by the addition of LDH due to its heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBS remained almost unchanged. In kinetics analysis of nonisothermal crystallization, the Ozawa approach failed to describe the crystallization behavior of PBS/LDH nanocomposites, whereas both the modified Avrami model and the Mo method well represented the crystallization behavior of nanocomposites. The effective activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. The subsequent melting behavior of PBS and PBS/LDH nanocomposites was observed to be dependent on the cooling rate. The POM showed that the small and less perfect crystals were formed in nanocomposites.