Surface energy and mechanical behaviour of hardened cement paste

The Bangham equation indicates a direct proportionality between the length change of a porous body and a change of surface energy. In our experiments surface energy of hardened cement paste has been modified by desorbing or adsorbing water molecules. The internal pressure created by surface energy could be directly determined with the help of Mössbauer experiments. Based on these results it is possible to determine to what extent shrinkage or swelling is caused by a change of surface energy. Using Griffith's criterion our findings can explain quantitatively the decrease of stength as a function of increasing water content. Results are in good agreement with other methods of studying surface energy such as experiments to determine van der Waals forces.     

Al-Mg合金中锯齿形屈服现象的热分析

研究了在室温、定加载应变率拉伸的情况下Al-Mg合金中的锯齿形屈服现象.伴随着锯齿形屈服现象的发生,试件表面温度场会发生变化.而红外相机能以较高的时间、空间分辨率记录下随时间变化的试件表面温度场图像.通过分析这些热图像,探讨了A,B两种类型带的传播规律,得到了局域变形带的带宽、倾角、传播速度等特征参数.在此基础上,引入热传导方程,求得了带内的应变率.实验和计算都发现B类型带产生时试件表面带外区域存在弹性收缩现象,由此提出以是否存在带外收缩变形作为划分A,B类型带的新标准.     

Relative ageing of series and parallel systems: Effects of dependence and heterogeneity among components

The effect of system structure on relative ageing properties of coherent systems has been extensively studied in terms of the increasing [reversed] hazard ratio. In this paper, we investigate the effects of dependence and heterogeneity among components on the relative ageing of series and parallel systems. Numerical examples are provided as illustrations.     

Crystallization and Physical Ageing of Poly (2-vinyl pyridine)-b-poly(ethylene oxide) Diblock Copolymers

Summary: A set of melt miscible Poly(2-vinyl pyridine)-b-Poly(ethylene oxide) (P2VP-b-PEO) block copolymers of different compositions were studied. Transmission electron microscopy shows phase separation in the materials during the crystallization process of the PEO block as crystalline lamellae are observed for all compositions evaluated. The isothermal crystallization kinetics of PEO is progressively retarded as the P2VP content in the copolymer increases, since P2VP hinders molecular mobility in the miscible amorphous phase. Polarized light optical microscopy demonstrated that the glassy P2VP block has a negative effect on the secondary nucleation of the PEO. Finally, physical ageing experiments performed in the glassy state of the amorphous mixed phase, at different ageing times, demonstrated that a nucleating effect can be induced in the glassy state as a consequence of the reorganization of the amorphous regions. This nucleating effect significantly alters the cold crystallization rate upon subsequent heating above the glass transition temperature.     

Radioactive analysis and radiological hazards in different types of Egyptian cement

Studies of the natural γ-emitting radionuclides in different types of cements manufactured by different companies in Egypt (e.g. Iron (HI), Karnak (HK), and Super fine (HSu) products from Helwan Ltd.) have been done to determine their natural levels of radioactivity using a high-purity germanium detector (HPGe). Knowledge of radioactivity present in cement materials enables one to assess any possible radiological risks to human health. The results show that the highest mean values of ²²⁶Ra and ²³²Th activity are 234.01±20.12 and 46.56±4.65 Bq kg^?1, respectively, measured in cement sample ‘Iron’ from Helwan company (HI). The corresponding value of ⁴⁰K is 333.53±26.68 Bq kg^?1 measured in cement sample ‘Karnak’ from Helwan company (HK). For ¹³⁷Cs, this value is 3.27±0.31 Bq kg^?1 measured in cement sample (HI). The average concentrations of measured radionuclides in the different cement samples are 72.21±6.39, 24.98±2.24, 134.49±10.45, and 0.58±0.08 Bq kg^?1 for ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs, respectively. The measured activity concentrations for these radionuclides were compared with the reported data of other countries. Radium equivalent (Ra_eq) activities and different hazard indices were calculated to assess the radiation hazard. Iron HI cement sample shows a higher Ra_eq activity of 311.91±31.10 Bq kg^?1. Calculations of absorbed doses in nGy h^?1 show that the Iron (HI), Karnak (HK), and Super fine (HSu) products from Helwan company have higher activities than the permissible level (80 nGy h^?1). On the basis of the external hazard index (H _ex), Ra_eq activities, and annual effective dose rates for organs (H _organ), the natural radioactivity of cement samples is not greater than the recommended values in the established standards and hence safe for use in building constructions and therefore for inhabitants.     

Enthalpy Relaxation Study of Poly(Vinyl Chloride) Films Based on the Time-Temperature Superposition Principle

Abstract

In the enthalpy relaxation of poly(vinyl chloride), a decrease in enthalpy upon the isothermal ageing was measured using the differential scanning calorimetry method as a function of ageing time (t_A) and ageing temperature. The range of the ageing temperature was from 56?°C (T_g ? 25?°C) to 72?°C (T_g ? 9?°C) where T_g denotes the glass transition temperature. The limiting value of the decrease in enthalpy was determined by applying a stretched exponential function to the measured enthalpy data. The relaxation function (?) was derived from the measured enthalpy and the construction of a master curve was tried by shifting the ? ? t_A curves of the respective ageing temperatures horizontally. Although there was no agreement between the shift factors (a_T) and the relaxation times of the ? ? t_A curves, the superposition was successfully constructed and the a_T values obtained for the poly(vinyl chloride) sample were found to be comparable to those reported for viscoelastic experiments over a broad temperature range above and below T_g carried out for different polymers. The origin of the decrease in enthalpy was briefly discussed in terms of the chain dynamics in the isothermal condition.     

The kinetics of solid-phase microextraction measured for freshly added and aged hydrophobic compounds in two different soils

The proper choice of exposure times is critical if the freely dissolved concentration of chemicals in soil porewater is to be measured via the equilibrium solid-phase microextraction (SPME) as the times to equilibrium may vary depending on compound and soil properties. To reveal the effects of compound hydrophobicity, ageing and soil organic matter content on times to equilibrium, the SPME uptake was measured for five freshly added and aged hydrophobic organic compounds (phenanthrene, pyrene, lindane, p,p′-DDT and polychlorinated biphenyl (PCB) 153) in two contrasted soils (arable and forest soil). The tested compound-soil systems behaved kinetically different. Longer equilibrium times were observed with increasing hydrophobicity of compounds for aged compared to freshly added chemicals and for the forest soil in comparison to the arable soil. The calculated soil–porewater partition coefficients (i.e. sorption coefficients, K_d) of chemicals differed between soil types mainly due to various organic carbon (OC) contents as evidenced by the comparable K_oc values (i.e. K_d values normalised to soil OC content). Similar K_oc values were also found with the various extent of ageing, indicating that both the freshly added and aged compounds linearly partitioned between the soil organic matter and porewater. Our results suggest that, for a respective compound, variations in equilibrium times may be expected depending upon the residence time and the organic matter content in soil where the longest equilibrium times seems to appear for a combination of aged compounds and high organic soils. With regard to this outcome, the effect of the level of sample depletion due to the SPME extraction (LD_SPME) on equilibrium times was assessed. At LDs_SPME of up to 10%, equilibrium times increases linearly with LDs_SPME for p,p′-DDT and PCB 153. For phenanthrene (LD_SPME<10%), and for lindane and pyrene (1.2% < LD_SPME > 40%), no clear relationships were observed.     

Kinetics of manganese ferrite generation from aqueous solution of MnO2 and FeSO4·7H2O through copreotitation and ageing

The authors present a kinetic investigation of the generation of manganese ferrite by the ageing of some coprecipitates in contact with the residual solution.     

Enthalpic relaxation of silica–polyvinyl acetate nanocomposites

Although the effects of filler nanoparticles size and surface treatment on the glass transition temperature of the matrix phase have received well-deserved attention, nanofiller effects on other physical parameters associated with the glass transition have received less interest. To better understand how the incorporation of nanofillers affects the enthalpic relaxations associated with the glass transition, differential scanning calorimeter measurements were carried out on silica–polyvinyl acetate nanocomposites with respect to filler content, annealing temperature, and annealing period. As expected, longer annealing periods below the glass transition temperature resulted in an increase of the subsequent enthalpic relaxations. However, the presence of filler substantially reduces the enthalpic relaxation relative to that of the neat polymer at longer annealing periods only. The underlying enthalpic relaxations and the effects suppressed by the fillers are specific to the annealing temperature. These results suggest a significant alteration in the physical state of the matrix because of the presence of the filler particles. However, this does not imply the existence of a glassy layer or layers with a glass transition gradient near the filler surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2733–2740, 2008