四羧基金属酞菁负载纤维素纤维的制备及其消臭性能研究

合成了四羧基铁酞菁(Fe-CPc)和四羧基钴酞菁(Co-CPc),并对其进行了元素分析和红外光谱表征.在酸性条件下,将四羧基金属酞菁负载到改性纤维素纤维上,制备得到消臭纤维.实验结果表明,在室温条件下,四羧基铁酞菁消臭纤维(FePcF)、四羧基钴酞菁消臭纤维(CoPcF)和混合金属酞菁消臭纤维(CoFePcF)3种功能性纤维都能有效去除甲硫醇、硫化氢、氨气和三甲胺,甲硫醇和硫化氢按催化氧化机理除去,而氨气和三甲胺按酸碱中和机理除去;3种消臭纤维对甲硫醇和硫化氢的消臭效果为CoFePcF>CoPcF>FePcF.     

Determination of trace elements in ambient aerosol samples

A microwave-assisted digestion procedure using HNO₃, HF, and H₂O₂ has been developed for analysis of elements in ambient particulate matter (PM). The samples are collected on cellulose filters and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The ICP-MS is calibrated with external standards, and recovery of analytes is tested with NIST SRM 1648 Urban Dust. This method has been used to quantify the airborne concentrations of a large number of elements, including Ag, As, Ba, Be, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Mo, Ni, Pb, Rb, Se, Sb, Sr, Ti, Tl, V, and Zn. For the majority of these elements, recovery of the NIST SRM is within 15% of the certified values.     

Highly crosslinked micron-range polymer microspheres by dispersion polymerization of divinylbenzene

Narrow disperse microparticles are formed by dispersion polymerization of commercial divinylbenzene in acetonitrile or ethanol solution in the presence of 2,2′-azobis(2-methylpropionitrile) initiator and polyvinylpyrrolidone stabilizer. The particles have average diameters between 1 and 9 μm depending on monomer concentration, solvent, and temperature. While the smaller particles are relatively smooth, surface texture increases with diameter to give popcorn shapes at 9 μm diameter. High crosslinker concentration is shown to be essential for particle formation. © 1993 John Wiley & Sons, Inc.     

Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.     

Transient rheological behavior of lyotropic (acetyl)(ethyl)cellulose/m-cresol solutions

The chiroptical properties and transient rheological behavior of (acetyl)(ethyl)cellulose (AEC) m-cresol liquid crystalline solutions have been investigated. Chiroptical properties were manipulated through (i) increasing degree of acetylation of ethyl cellulose (EC), and (ii) blending AEC with EC. At the same average degree of acetylation (DA), the chiroptical properties of pure AEC were different from those of the EC/AEC mixtures. However, at the same DA, the AEC and mixed AEC/EC solutions showed similar steady state flow and oscillatory behaviors, but the transient behaviors were different. At high flow rates the mixed AEC/EC solutions exhibited double recoil after cessation of steady-state flow, whereas the AEC solutions showed double recoil only in the high DA AEC solutions. All solutions, pure and mixed, had the same stress relaxation behavior. Both pitch and handedness affected the transient behavior. After cessation of high shear rate flow, the rate of modulus evolution decreased with increasing pitch, and was faster in right-handed mesophases than in left-handed ones at a similar pitch.     

EXAMINATION OF THE SURFACE FREE ENERGY AND ACID-BASE PROPERTIES OF CELLULOSE BY THE COLUMN WICKING TECHNIQUE AND THE CRITICAL PACKING HEIGHT/DENSITY

INTRODUCTIONThe wicking technique has been used to determine the surface energy components of solids[1-7]. Generally, thereare two wicking processes in practice, i.e. thin layer wicking and column wicking. A comparison of the twowicking techniques made by van Oss et al.[2], shows that column wicking has a problem of showing differentpacking density due to some kinds of powder materials, i.e. clay can not give good repacking reproducibility[2].But thin layer wicking has a problem in sample…     

Hydrophilic core-shell microspheres: a suitable support for controlled attachment of proteins and biomedical diagnostics

Functional hydrophilic microspheres (latex particles) have found various applications in life sciences and in medicine - particularly in latex diagnostic tests. This paper presents a comprehensive review of studies on latex particles with a hydrophilic interfacial layer composed of various hydrophilic polymers with reactive groups at the ends of macromolecules or at each monomeric unit along the chain. Typical examples of these hydrophilic polymers are poly(2-hydroxyethyl methyl methacrylate), poly(acrylic acid), poly(N,N-dimethylacrylamide), polysaccharides, poly(ethylene oxide) and polyglycidol. Hydrophilic microspheres with different morphologies (uniform or core-shell, see Figure) have been synthesized by emulsion and dispersion polymerizations. The chemical structure of polymers which constitute the interfacial layer of microspheres has been investigated using a variety of instrumental techniques (such as XPS, SSIMS and NMR) and analytical methods based on specific chemical reactions suitable for the determination of particular functional groups. Microspheres are exposed to contact with proteins in the majority of medical applications. This paper presents examples of studies on the attachment of these biomacromolecules to microspheres. The relation between the structure of the interfacial layer of microspheres and the ability of these particles for the covalent binding of proteins is discussed. Several examples of diagnostic tests, in which hydrophilic microspheres with adsorbed or covalently immobilized proteins were used as reagents, are presented. The paper also contains a short review of the application of magnetic hydrophilic particles for protein separation. Examples of hydrophilic latex particles used for hemoperfusion or heavy metal ion separation are presented. Hydrophilic microspheres with uniform or core-shell morphologies.     

Principle of a new immunoassay based on electrophoretic mobility of poly(styrene/alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol) microspheres: application for the determination of helicobacter pylori IgG in blood serum

The principle of a novel latex diagnostic test for the determination of antibodies against Helicobacter pylori in blood sera is described. The test is based on the measurement of the electrophoretic mobility of the microspheres with immobilized H. pylori antigens. The electrophoretic mobility of these microspheres depends on the concentration of the antibodies against H. pylori in suspending medium. Particles with hydrophilic polyglycidol in the surface layer were used for the test. The microspheres were obtained by an emulsifier-free emulsion copolymerization of styrene and alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol macromonomer (D(n) = 220 nm, diameter polydispersity factor D(w)//D(n) = 1.02). Activation of polyglycidol hydroxyl groups with cyanuric chloride allowed for covalent immobilization of H. pylori antigens. The fraction of H. pylori not specifically adsorbed onto the microspheres was negligible. Changes of the electrophoretic mobility of the microspheres with the surface concentration of the covalently immobilized H. pylori antigens Gamma = (1.6 +/- 0.3) . 10(-3) g m(-2) were suitable for the detection of the antibodies in the sera of patients with titer in the range (determined by the indirect ELISA test) from 1:500 to 1:32 000.     

The Degree of Disorder in Hardwood Kraft Pulps Studied by Means of LODP

The amount of disordered material in two types of hardwood kraft pulps was estimated by determining the weight loss at the point where the levelling-off degree of polymerisation (LODP) was reached. The pulps used were commercial pulps viz (1)one conventional birch kraft and (2)one mixed hardwood (MHW) kraft pulp that had been prehydrolysed prior to cooking. The results indicated that the hemicellulose xylan is closely associated with the cellulose in commercial birch pulps. It is therefore only possible to use LODP as a measure of the crystallite length of hardwood cellulose in highly purified pulps, such as prehydrolysed kraft pulp. A model explaining the LODP-results is proposed.     

Cellulose hydrolysis using zinc chloride as a solvent and catalyst

Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v) by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v).