Transient rheological behavior of lyotropic (acetyl)(ethyl)cellulose/m-cresol solutions

The chiroptical properties and transient rheological behavior of (acetyl)(ethyl)cellulose (AEC) m-cresol liquid crystalline solutions have been investigated. Chiroptical properties were manipulated through (i) increasing degree of acetylation of ethyl cellulose (EC), and (ii) blending AEC with EC. At the same average degree of acetylation (DA), the chiroptical properties of pure AEC were different from those of the EC/AEC mixtures. However, at the same DA, the AEC and mixed AEC/EC solutions showed similar steady state flow and oscillatory behaviors, but the transient behaviors were different. At high flow rates the mixed AEC/EC solutions exhibited double recoil after cessation of steady-state flow, whereas the AEC solutions showed double recoil only in the high DA AEC solutions. All solutions, pure and mixed, had the same stress relaxation behavior. Both pitch and handedness affected the transient behavior. After cessation of high shear rate flow, the rate of modulus evolution decreased with increasing pitch, and was faster in right-handed mesophases than in left-handed ones at a similar pitch.     

Sol-Gel Processing of Transparent PLZT((Pb,La)(Zr,Ti)O3) Fibers

PLZT((Pb,La)(Zr,Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n-propoxide and titanium isopropoxide containing 2-methoxyethanol as the solvent. The as-drawn gel fibers were pretreated in an autoclave and preheated in flowing H₂O vapor prior to the heat-treatment for crystallization. The effects of autoclaving and preheating in flowing H₂O vapor on the structure and composition of the resultant fibers were investigated. Optically transparent single phase perovskite PLZT fibers of 5–15 m in thickness and 5 cm in length were successfully prepared when the autoclave-treatment and the preheating in flowing H₂O vapor were conducted prior to crystallization. These treatments are thought to promote hydrolysis of the organic groups and polycondensation reaction in the gel fibers, leading to the successful formation of dense, crack-free transparent PLZT fibers.     

EXAMINATION OF THE SURFACE FREE ENERGY AND ACID-BASE PROPERTIES OF CELLULOSE BY THE COLUMN WICKING TECHNIQUE AND THE CRITICAL PACKING HEIGHT/DENSITY

INTRODUCTIONThe wicking technique has been used to determine the surface energy components of solids[1-7]. Generally, thereare two wicking processes in practice, i.e. thin layer wicking and column wicking. A comparison of the twowicking techniques made by van Oss et al.[2], shows that column wicking has a problem of showing differentpacking density due to some kinds of powder materials, i.e. clay can not give good repacking reproducibility[2].But thin layer wicking has a problem in sample…     

The Degree of Disorder in Hardwood Kraft Pulps Studied by Means of LODP

The amount of disordered material in two types of hardwood kraft pulps was estimated by determining the weight loss at the point where the levelling-off degree of polymerisation (LODP) was reached. The pulps used were commercial pulps viz (1)one conventional birch kraft and (2)one mixed hardwood (MHW) kraft pulp that had been prehydrolysed prior to cooking. The results indicated that the hemicellulose xylan is closely associated with the cellulose in commercial birch pulps. It is therefore only possible to use LODP as a measure of the crystallite length of hardwood cellulose in highly purified pulps, such as prehydrolysed kraft pulp. A model explaining the LODP-results is proposed.     

Cellulose hydrolysis using zinc chloride as a solvent and catalyst

Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v) by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v).     

The role of salt on cellulose dissolution in ethylene diamine/salt solvent systems

Ethylene diamine (EDA)/salt solvent systems can dissolve cellulose without any pretreatment. A comparison of the electrical conductivity of different salts in EDA was made at 25 °C, and conductivity decreased in the order of KSCN>KI>NaSCN at the same molar concentration. Among the salts tested, potassium thiocyanate (KSCN) was capable of dissolving both high molecular weight (DP>1000) and low molecular weight (DP = 210) cellulose, and this was confirmed by polarized light microscopy. ³⁹K and ¹⁴N NMR experiments were conducted at 70 °C as a function of cellobiose concentration with EDA/KSCN as the solvent. The results showed that the K⁺ ion interacts with cellobiose more than the SCN⁻ ion does. Recovered cellulose was studied by infrared spectroscopy (FTIR) and wide angle X-ray diffraction (WAXD). Changes in the FTIR absorption bands at 1,430 and 1,317 cm⁻¹ were associated with a change in the conformation of the C-6CH₂OH group. The changes in positions and/or intensities of absorption bands at 2,900, 1,163, and 8,97cm⁻¹ were related to the breaking of hydrogen bonds in cellulose. X-ray diffraction studies revealed that cellulose, recovered by precipitating cellulose solutions with water, underwent a polymorphic transformation from cellulose I to cellulose II.     

Influence of the heating rate on the temperature profiles and on the conversion rate of powdery cellulose and pine sawdust

An experimental study of the thermal decomposition of powdered cellulose and pine sawdust has been performed. The influence of the heating rate on the temperature profiles in the sample and on the solid conversion rate has been studied. A mathematical model without adjustable parameters has been used to calculate the temperature at different points in the solid bed and the average total solid conversion. The experimental results have been compared with those calculated by the model. A good agreement has been obtained for sawdust. Some differences are observed for cellulose at high heating rates, and the influence of the thermal conductivity and the reaction heat on the results has been analysed.     

Efficient synthesis of cellulose furoates in 1-<Emphasis Type="Italic">N</Emphasis>-butyl-3-methylimidazolium chloride

The ionic liquid 1-N-butyl-3-methylimidazolium chloride ([C₄mim]⁺Cl⁻) was investigated as reaction media for the homogeneous acylation of cellulose with 2-furoyl chloride in the presence of pyridine. The preparation of cellulose furoate depending on the reaction conditions, the cellulose type and the pyridine content was studied. Cellulose furoates with a degree of substitution in the range from 0.46 to 3.0 were accessible, i.e., under mild conditions, with a low excess of reagent and in a short reaction time. The products were characterized by elemental analysis, perpropionylation, ¹H- and ¹³C NMR spectroscopy and FTIR spectroscopy. Thomas Heinze is the member of the European Polysaccharide Network of Excellence (EPNOE), www.epnoe.eu     

Effect of take-up speed on physical properties and permeation performance of cellulose acetate hollow fibers

Cellulose acetate (CA) ultrafiltration hollow fibers were spun via the dry-jet wet spinning technique. The effect of the take-up speed on the mechanical properties, morphology, thermal properties, pure water permeation, retention, and surface characterization of hollow fiber membranes were investigated. Both the inner and outer diameters of the hollow fiber decreased with the increase of take-up speed. Macrovoids were observed on the inner surface of the drawn hollow fibers. The d-space decreased with the increase of the take-up speed. The ultimate tensile stress (UTS) increased and the breaking elongation decreased with the increase of take-up speed. The permeation performance was measured. The hydraulic permeability increased and the retention decreased slightly with the increase of the take-up speed. The surface roughness increased with the increase of the take-up speed. The thermal analysis results showed that the endothermic peak shifts to the higher temperature region and coefficient of thermal expansion (CTE) decrease for a higher take-up speed.     

Ionic liquid–modified cellulosic hydrogels for loading and sustained release of selenourea: an ensuing inhibition of tyrosinase activity

Cellulose-based hydrogel materials were prepared and modified with tannic acid and l-methionine using ionic liquid as the solvent. The gels were prepared to develop a sustained release medium for selenourea (SeU). The drug delivery characteristics of selenourea-loaded cellulose (CSeU), selenourea-loaded tannic acid-modified cellulose (CTSeU), and selenourea-loaded L-methionine-modified cellulose (CMSeU) were investigated in aqueous media and simulated gastric fluid (SGF) media. This modified gel beads have been characterized using field emission scanning electron microscope, X-ray energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry–differential thermal analysis and swelling properties and compared with those of the unmodified ones. We also investigated the inhibitory effects of SeU released from these gels on the activity of mushroom tyrosinase. Out of all the gel materials, CTSeU showed maximum SeU release both in water and SGF media. However, tyrosinase inhibitory action in PBS medium was comparable for all the three gel materials.