Pd/Au(100)表面上乙烯气相氧化法合成乙酸乙烯酯催化活性的密度泛函理论研究

采用密度泛函理论方法系统地研究了Pd/Au(100)表面上乙烯气相氧化法合成乙酸乙烯酯的催化活性.对关键反应物种在该表面的吸附、共吸附性质及耦合基元反应进行了计算和讨论.乙烯在Pd/Au(100)表面上存在π-,2σ-两种稳定吸附构型,为弱化学吸附;乙酸根物种存在Pd-Au与Pd-Pd两种二位啮合(bi-dentate)构型,为强化学吸附.Pd/Au(100)表面的吸附作用使两个关键反应物种分子轨道能量靠近.共吸附构型中最高占据和最低未占据分子轨道的能级差(HOMO-LUMO-gap)随表面相邻Pd原子数目的增多而增大,表明由HOMO向LUMO分子轨道发生电子转移的能力变弱.耦合基元反应过渡态能垒的分析结果与HOMO-LUMO-gap定性分析结果一致,说明连续相邻的表面Pd原子不利于反应的进行.     

Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.     

Synthesis of conformationally restricted C2 symmetric macrodiolides via head to tail dimerization of carbonyl ylides

Tandem reaction of α-diazocarbonyl compounds in the presence of rhodium(II) acetate catalyst is described to furnish a range of conformationally restricted C₂ symmetric macrodiolides via head to tail dimerization of intramolecular carbonyl ylides.     

Effect of ethylene-co-vinyl acetate-glycidylmethacrylate and cellulose microfibers on the thermal,rheological and biodegradation properties of poly(lactic acid) based systems

The properties and biodegradation behavior of blends of poly(lactic acid) (PLA) and ethylene-vinyl acetate-glycidylmethacrylate copolymer (EVA-GMA), and their composites with cellulose microfibers (CF) were investigated. The blends and composites were obtained by melt mixing and the morphology, phase behavior, thermal and rheological properties of PLA/EVA-GMA blends and PLA/EVA-GMA/CF composite films were investigated as a function of the composition. The disintegrability in composting conditions was examined by means of morphological, thermal and chemical analyses to gain insights into the post-use degradation processes. The results indicated a good compatibility of the two polymers in the blends with copolymer content up to 30 wt.%, while at higher EVA-GMA content a phase separation was observed. In the composites, the presence of EVA-GMA contributes to improve the interfacial adhesion between cellulose fibers and PLA, due to interactions of the epoxy groups of GMA with hydroxyls of CF. The addition of cellulose microfibers in PLA/EVA-GMA system modifies the rheological behavior, since complex viscosity increased in presence of fibers and decreased with an increase in frequency. Disintegration tests showed that the addition of EVA-GMA influence the PLA disintegration process, and after 21 days in composting conditions, blends and composites showed faster degradation rate in comparison with neat PLA due to the different morphologies induced by the presence of EVA-GMA and CF phases able to allow a faster water diffusion and an efficient PLA degradation process.     

New transformations of vinyl acetate under the influence of the complex Rh(PPh3)3Cl

The strictly regioselective hydrocarboxylation of vinyl acetate to ethylidene diacetate by acetic acid formed in situ from vinyl acetate was realized for the first time with Rh(PPh₃)₃Cl as catalyst. The transformation of vinyl acetate into benzene, acetophenone, and acetylene was also realized.Institute of Organic Chemistry, Urals Branch, Russian Academy of Sciences, 420083 Ufa. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 6, pp. 1406–1408, June, 1992.     

Preparation of cellulose samples for size-exclusion chromatography analyses in studies of paper degradation

Hydrolytic degradation of cellulose was shown to take place during the activation procedure in distilled water during the dissolution procedure of cellulose samples from papers for size-exclusion chromatography analyses in the lithium chloride-N,N-dimethylacetamide (DMAc) solution system. The use of dilute aqueous sodium hydroxide solution in the activation procedure prevents hydrolytic degradation of cellulose during the dissolution procedure, especially in the case of samples of aged papers with low pH. The use of the freeze-drying technique provides samples of cellulose ready-made for dissolution in lithium chloride-N,N-dimethylacetamide solution.     

RuO4-promoted oxidative polycyclization of isoprenoid polyenes. A further insight into the stereochemistry of the process

Further studies on the RuO₄-catalyzed oxidative polycyclization of isoprenoid polyenes have been carried out. The configuration of the tris-THF product from the oxidation of geranylgeranyl acetate has been determined by a combination of spectral and chemical correlation methods. The oxidation of (E,Z)-farnesyl acetate, synthesized from nerol, has been carried out. This process stops at the first cyclization indicating that an E configuration of the Δ⁶ double bond is needed for the second cyclization to occur. The results are discussed in comparison with previous knowledge on the related Re(VII) polycyclization of polyenic bis-homoallylic alcohols.     

Picolinamide-Cu(Ac)2-imprinted polymer with high potential for recognition of picolinamide-copper acetate complex

In this report, with semi-empirical quantum method, we have studied the conformation and energy of supermolecule composed of picolinamide and its positional isomers with methacrylic acid. We tried to explore the reason why picolinamide was not likely to show imprinting effect when using methacrylic acid as functional monomer in our previous work. In order to produce imprinting effect, which was not achieved based on hydrogen bonding interaction, we have synthesized a molecular-imprinted polymer (MIP) based on copper ion coordination in prepolymerization. The complex in prepolymerization was composed of copper(II), acetate, picolinamide and 4-vinylpyridine (4-Vpy). Suprisingly, the MIP had high selectivity to picolinamide-copper acetate complex, and changes of either copper ion, picolinamide or acetate would result in decrease in the imprinting effect. This is also the first example where the high selective recognition of the MIP to its template was achieved mainly by inhibiting the binding of non-template rather than enhancing the binding of the template. And this report can be also looked upon as a first step towards the solution to the problem of imprinting of template that contains intramolecular hydrogen bond.     

纳米纤维素晶须的表面醋酸酯化改性及复合材料的力学性能

采用硫酸水解法制备纳米纤维素晶须, 再以冰醋酸为分散介质, 浓硫酸为催化剂, 醋酸酐为酯化剂对纳米纤维素晶须进行不同程度醋酸酯化改性, 得到醋酸酯化的纳米纤维素. 采用红外光谱(FTIR)、 X射线光衍射(XRD)、 透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对改性产物进行分析和表征. 结果表明, 改性纳米纤维素晶须中醋酸酯基的平均取代度过小或过大时均不适宜用作复合材料的增强相. 当改性纳米纤维素晶须中醋酸酯基的平均取代度为0.05时, 醋酸酯化反应只发生在纳米纤维素晶须的表面. 此时, 晶须能在丙酮中稳定悬浮, 表现出流动双折射现象, 并保持了改性前纳米纤维素晶须的棒状形态和高结晶度. 将这种改性后的纳米纤维素晶须作为增强相与醋酸纤维素通过溶液浇铸法制成纳米复合膜, 结果显示, 与空白醋酸纤维素膜相比, 添加改性纳米纤维素晶须后, 纳米复合膜的拉伸强度、 杨氏模量和断裂伸长率都得到了提高. 在玻璃化转变区间纳米复合膜储能模量的降低幅度小于空白膜.     

紫外光谱法测定乙酸乙烯酯中的对苯二酚

采用紫外光谱法测定乙酸乙烯酯中对苯二酚含量时,乙酸乙烯酯中的有机杂质会对测试结果产生影响.其中乙醛、丙酮对测试结果的影响程度基本呈线性递增关系,而醋酸甲酯、醋酸乙酯对测试结果不会产生影响.