A Rapid and Convenient Synthesis of Derivatives of Imidazoles under Microwave Irradiation

An efficient and a quick microwave‐assisted synthesis of benzimidazoles and trisubstituted imidazoles was developed. Three benzimidazoles were obtained as a result of the condensation of 1,2‐phenylenediamine with carboxylic acids and acetoacetic ester without catalyst. A series of trisubstituted imidazoles were synthesized by condensation of benzil, aromatic aldehyde and ammonium acetate in the presence of glacial acetic acid.     

淀粉接枝丙烯酸/醋酸乙烯酯高吸水性树脂的制备

以过硫酸铵为引发剂,N,N-亚甲基双丙烯酰胺为交联剂,淀粉与丙烯酸/醋酸乙烯酯混合单体通过接枝共聚,制备了吸水及耐盐性能均较好的淀粉接枝丙烯酸/醋酸乙烯酯高吸水性树脂(CGAV)。最佳工艺条件为:淀粉10.0 g,m(混合单体)∶m(淀粉)=4∶1,w(引发剂)=0.3%,w(交联剂)=0.05%,于45℃反应2h~3 h。在最佳工艺条件下制得的CGAV吸去离子水率760 g.g-1,吸0.9%NaC l水溶液率68 g.g-1。     

Comparison of different reactive organophosphorus flame retardant agents for cotton: Part I. The bonding of the flame retardant agents to cotton

N-Methylol dimethylphosphonopropionamide (MDPA), known as “Pyrovatex CP” and “Pyrovatex CP New” commercially, has been one of the most commonly used durable flame retardant agents for cotton for many years. In our previous research, we developed a flame retardant finishing system for cotton based on a hydroxy-functional organophosphorus oligomer (HFPO) in combination with a bonding agent such as trimethylolmelamine (TMM) and dimethyloldihydroxyethyleneurea (DMDHEU). In this research, we investigated the bonding of these two flame retardant finishing agents to cotton. We found that the majority of MDPA is bound to cotton by its N-methylol group and that the use of TMM as a co-reactant modestly increases the fixation of MDPA onto cotton. For HFPO, however, the use of a bonding agent is necessary to form a covalent linkage between HFPO and cotton. Both the fixation of HFPO on cotton and its laundering durability are influenced by the effectiveness and concentration of the bonding agent. The commercial product of HFPO contains approximately 33% more phosphorus than that of MDPA and the percent fixation of HFPO on cotton is also moderately higher than that of MDPA. The bonding between MDPA and cotton is significantly more resistant to hydrolysis during multiple launderings than that between HFPO and cotton. The selection of catalyst also plays a significant role in influencing the bonding of the flame retardant agents to cotton.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Selection of thermotolerant yeasts for simultaneous saccharification and fermentation (SSF) of cellulose to ethanol

A total of 27 yeast strains belonging to the groupsCandida, Saccharomyces, andKluyveromyces were screened for their ability to grow and ferment glucose at temperatures ranging 32-45°C. K. marxianus andK. fragilis were found to be the best ethanol producing organisms at the higher temperature tested and, so, were selected for subsequent simultaneous saccharification and fermentation (SSF) studies.     

Mercerization of primary wall cellulose and its implication for the conversion of cellulose I→cellulose II

The mercerization of homogenized primary wall cellulose extracted fromsugar beet pulp was investigated by transmission electron microscopy (TEM),X-ray diffraction together with ¹³C CP-MAS NMR, and FT-IR spectroscopy.For samples resulting from acid extraction, mercerization began at 9% NaOH, whereasfor samples purified by alkaline treatment, the mercerization started at 10%NaOH. The change in morphology when going from cellulose I to cellulose II wasspectacular, as all the microfibrillar cellulose morphology disappeared duringthe treatment. This change in morphology was very drastic as soon as the NaOHconcentrations were increased beyond 8 and 9% for the acid and alkalinepreparedsamples, respectively. On the other hand, the conversion was found to be moreprogressive in terms of increasing NaOH concentration when the transformationwas analyzed by X-ray diffraction or spectroscopy. Our observations of themercerization of isolated cellulose microfibrils are consistent with theconceptof cellulose microfibrils made of parallel chains in cellulose I and crystalsofcellulose II consisting of antiparallel chains.     

Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.     

含氯聚合物和乙烯-醋酸乙烯酯共聚物共混体系的红外光谱研究

关于氯化聚乙烯(CPE)或聚氯乙烯(PVC)与乙烯—醋酸乙烯酯共聚物(EVA)共混体系相容性的研究,已有不少报道,其中Coleman等人运用FTIR方法研究了含VA45％的EVA与CPE、PVC的共混体系,测定了该体系的低临界共溶温度(LCST)。一般认为,如果VA含量更低,由于EVA本身的结晶,共混体系将变得难以     

Selective Acetylation of Alcohols and Amines with Ethyl Acetate in the Presence of H<Subscript>6</Subscript>[PMo<Subscript>9</Subscript>V<Subscript>3</Subscript>O<Subscript>40</Subscript>] as the Catalyst

Summary. Acetylation of various alcohols and benzyl amine was tested in the presence of H₆[PMo₉V₃O₄₀], a mixed addenda heteropolyacid, in ethyl acetate under reflux condition. Phenols and anilines are not affected under the reaction conditions. Selective transestrification of alcohols can be achieved in the presence of phenol and aniline derivatives using this method.     

Characterization of the barrier properties of composites of HDPE and purified cellulose fibers

The present work presents and discusses the interrelation between composition, morphology, thermal history, mechanical and barrier properties to oxygen and limonene of composites of HDPE/MA-PE/cellulose fibers of significant interest in, among others, food packaging applications. From the overall results, it was observed that increasing the loading of purified alpha-cellulose fibers in the polyethylene matrix beyond 10 wt.% led to a decrease in the permeability coefficient of d-limonene, effect which was found to be primarily related to a decrease in the overall solubility of this strongly plasticizing aroma component. On the other hand, the oxygen permeability was found to decrease to a significant extend with increasing fiber content beyond 5 wt.%, but this effect was more strongly ascribed to a significant decrease in the diffusion coefficient. Therefore, the fibers are thought to generate a more tortuous path for the non-interacting gas molecules to travel across the composites thickness, even when tested at high relative humidity conditions. Optimum fiber loading levels in terms of overall property balance were found to be around 20 wt.%.