Effect of pH on the Encapsulation of the Salicylic Acid / Salicylate System by Hydroxypropyl-β-Cyclodextrin at 25 °c. A Fluorescence Enhancement Study in Aqueous Solutions

The encapsulation of the acid/base conjugated system salicylic acid(HSA)/salicylate (SA^-) by hydroxypropyl--cyclodextrin (HPBCD) has beenstudied through fluorescence emission enhancement measurements in aqueoussolutions at 25 °C. With the aim of analyzing the crucial importance ofa proper and cautious choice of the pH of the medium (i.e. choice of thebuffer), the study has been carried out at pH = 1, 2, 4 and 7. Since the pK_a of the HSA/SA^- system is 2.95 at 25 °C, the presence of the protonated(HSA) and non-protonated (SA^-) forms suitable for inclusion by cyclodextrinvary appreciably within the different pH conditions: 99% HSA,1% SA^- at pH = 1, 90% HSA, 10% SA^- at pH = 2,10% HSA, 90% SA^- at pH = 4, and 0% HSA,100% SA- at pH =7. The association constants K CD : HSA and K _{CD: SA-} have been determined in all cases by using a nonlinear regressionanalysis of the experimental data at three different ^em. The effectof the pH of the medium on all the equilibria involved as well as in the Kvalues is fully discussed. The 8-anilino-1-naphthalene sulfonate (ANS) +-cyclodextrin (-CD) system, widely reported in literature, hasinitially been studied to check the experimental protocol and the numericalmethod.     

The influence of pH on phosphatidylcholine monolayer at the air/aqueous solution interface

The measurements of the interfacial tension at the air/aqueous subphase interface as the function of pH were performed. The interfacial tension of the air–aqueous subphase interface was divided into contributions of individuals. A simple model of the influence of pH on the phosphatidylcholine monolayer at the air/hydrophobic chains of phosphatidylcholine is presented. The contributions of additive phosphatidylcholine forms (both interfacial tension values and molecular area values) depend on pH. The interfacial tension values and the molecular areas values for LH⁺, LOH⁻ forms of phosphatidylcholine were calculated. The assumed model was verified experimentally.     

pH对毛细管电泳分离多肽的影响

设计了一个针对高年级本科生的毛细管电泳分离实验，用以研究pH对生物小分子多肽分离的影响。5种多肽包括Bradykinin、[Hyp3]-bradykinin、Angiotensin I、Leucine Enkephalin和[Met5]-Enkaphalin，被用于毛细管电泳的分离实验。研究了毛细管电泳生物分析实验中最重要的2个因素即电渗流和样品吸附随pH的变化以及对于分离的影响。在pH=10的条件下，酸性多肽几乎没有吸附，少量的碱性多肽有吸附。在pH=6的条件下，碱性多肽具有非常强的吸附从而导致非常差的分离效果，在pH=2.3的条件下，5种多肽都能被很好地分离，由于多肽此时都带有正电荷因此几乎没有吸附。而在此pH，电渗流消失。对具有一定分析化学基础理论知识的学生而言，这是一个非常好的生物分析实验，有助于学生充分理解相关环境因素对仪器分析的重要影响。     

Quantitative determination of sodium stearyl fumarate in a tablet formulation from continuous manufacturing using a high-pH reversed-phase HPLC method

This study demonstrates the first use of a reversed-phase (RP) high-performance liquid chromatography method with a high-pH buffer for the analysis of sodium stearyl fumarate (SSF) from a tablet formulation. After examining the retention time and peak shape using various buffer concentrations, buffer pH, and RP stationary phases, an optimized method was established using the XBridge® BEH C18 at high pH. This column was further evaluated for method specificity, accuracy, precision, linearity, stability, and sensitivity. Finally, the method was successfully used as a convenient and robust analytical procedure to accurately quantitate SSF in stratified tablets from a continuous manufacturing process to confirm the excipient uniformity throughout the process.     

Carbon dots with strong excitation-dependent fluorescence changes towards pH. Application as nanosensors for a broad range of pH

In this study, preparation of novel pH-sensitive N-doped carbon dots (NCDs) using glucose and urea is reported. The prepared NCDs present strong excitation-dependent fluorescence changes towards the pH that is a new behavior from these nanomaterials. By taking advantage of this unique behavior, two separated ratiometric pH sensors using emission spectra of the NCDs for both acidic (pH 2.0 to 8.0) and basic (pH 7.0 to 14.0) ranges of pH are constructed. Additionally, by considering the entire Excitation–Emission Matrix (EEM) of NCDs as analytical signal and using a suitable multivariate calibration method, a broad range of pH from 2.0 to 14.0 was well calibrated. The multivariate calibration method was independent from the concentration of NCDs and resulted in a very low average prediction error of 0.067 pH units. No changes in the predicted pH under UV irradiation (for 3 h) and at high ionic strength (up to 2 M NaCl) indicated the high stability of this pH nanosensor. The practicality of this pH nanosensor for pH determination in real water samples was validated with good accuracy and repeatability.     

An improved cellular automaton model with the consideration of a multi-point tollbooth

Based on the classical Nagel–Schreckenberg model, we in this paper propose an improved cellular automaton (CA) model to study the influences of a multi-point tollbooth on traffic flow. The numerical results show that the multi-point tollbooth can be looked at as a bottleneck and that it can improve the road capacity compared with other tolling stations, which shows that the proposed model is more effective than other traffic flow models. In addition, the results can help readers to better understand the effects of a multi-point tollbooth on traffic flow and help traffic engineers to reasonably design the tolling station.     

Uranium Dissolution in Hyperalkaline TMA-OH Solutions: Preliminary Results

Leaching experiments were performed with depleted UO₂ powders in tetramethylammonium solutions (TMA-OH) at pH 13.5 and 12.5, and at different UO₂ surface area to volume of solution (SA/V) ratio's to determine the solubility and the dissolution kinetics of UO₂ at high pH in absence of cations dominating cementitious waters (Ca,Na, K).The solubility of UO₂ increased from pH 12.5 to 13.5 and by increasing the SA/V ratio up to 100 m^-1. However, no known U secondary-phases were predicted by geochemical calculations to control the measured U-concentrations. A two-step dissolution process was put forward: 1-a fast initial rate, surface controlled and hydroxo promoted and 2-a sorption process at low SA/V ratio or a continuous residual dissolution process at high SA/V ratio.