Preparation of Highly Stable and Photoluminescent Cadmium-Free InP/GaP/ZnS Core/Shell Quantum Dots and Application to Quantitative Immunoassay

Indium phosphide (InP) quantum dots (QDs) are ideal substitutes for widely used cadmium-based QDs and have great application prospects in biological fields due to their environmentally benign properties and human safety. However, the synthesis of InP core/shell QDs with biocompatibility, high quantum yield (QY), uniform particle size, and high stability is still a challenging subject. Herein, high quality (QY up to 72%) thick shell InP/GaP/ZnS core/shell QDs (12.8 ± 1.4 nm) are synthesized using multiple injections of shell precursor and extension of shell growth time, with GaP serving as the intermediate layer and 1-octanethiol acting as the new S source. The thick shell InP/GaP/ZnS core/shell QDs still keep high QY and photostability after transfer into water. InP/GaP/ZnS core/shell QDs as fluorescence labels to establish QD-based fluorescence-linked immunosorbent assay (QD-FLISA) for quantitative detection of C-reactive protein (CRP), and a calibration curve is established between fluorescence intensity and CRP concentrations (range: 1–800 ng mL⁻¹, correlation coefficient: R² = 0.9992). The limit of detection is 2.9 ng mL⁻¹, which increases twofold compared to previously reported cadmium-free QD-based immunoassays. Thus, InP/GaP/ZnS core/shell QDs as a great promise fluorescence labeling material, provide a new route for cadmium-free sensitive and specific immunoassays in biomedical fields.     

The selective introduction of organometallic markers into estrogens. A-ring propargylation of β-estradiol

Introduction of the propargyl dicobalt hexacarbonyl moiety onto the estradiol A ring as a potential probe in receptor studies requires protection of the ring phenolic group, and the regio-selectivity of the attack (2- versus 4-position) depends on the bulkiness of the organometallic carbenium ion.     

β‐AgVO3 Nanorods as Peroxidase Mimetic for Colorimetric Determination of Glucose

β‐AgVO₃ nanorods have been demonstrated to exhibit intrinsic peroxidase‐like activity. The oxidation of glucose can be catalyzed by glucose oxidase (GOx ) to generate H₂O₂ in the presence of O₂ . The β‐AgVO₃ nanorods can catalytically oxidize peroxidase substrates including o‐phenylenediamine (OPD ), 3,3′,5,5′‐tetramethylbenzidine (TMB ), and diammonium 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonate) (ABTS ) by H₂O₂ to produce typical color reactions: OPD from colorless to orange, TMB from colorless to blue, and ABTS from colorless to green. The catalyzed reaction by the β‐AgVO₃ nanorods was found to follow the characteristic Michaelis–Menten kinetics. Compared with horseradish peroxidase and AgVO₃ nanobelts, β‐AgVO₃ nanorods showed a higher affinity for TMB with a lower Michaelis–Menten constant (K _m) value (0.04118 mM ) at the optimal condition. Taking advantage of their high catalytic activity, the as‐synthesized β‐AgVO₃ nanorods were utilized to develop a colorimetric sensor for the determination of glucose. The linear range for glucose was 1.25–60 μM with the lower detection limit of 0.5 μM . The simple and sensitive GOx ‐β–AgVO₃ nanorods–TMB sensing system shows great promise for applications in the pharmaceutical, clinical, and biosensor detection of glucose.     

Optimum extraction process of polyphenols from Bridelia grandis stem bark using experimental design

Euphorbiaceae barks are known to contain an appreciable amount of polyphenolic compounds responsible for several biological activities. Preliminary extraction from Bridelia grandis stem bark afforded high content of polyphenols, determined by spectrophotometric methods such as Folin–Ciocalteu (for total phenols, TP) and n‐butanol‐HCl (for condensed tannins, CT). A preliminary Plackett–Burman screening design was used to identify the key factors that influence the TP and CT extraction. Between all the variables known to influence the extraction from vegetable matrixes, six were selected; maceration was chosen as traditional extraction methodology. To investigate the effect of solvents and extraction method, methanol, acetone 70% (v/v in water), centrifugation and ultrasound were chosen. A full factorial design 2³ was applied to optimize the extraction procedure. The responses were obtained analyzing the extracts for their TP and CT contents determined by the above‐mentioned spectrophotometric methods. The results confirm that, within the explored domain, the optimum solvent is methanol and the optimum method is one‐cycle centrifugation. Finally, it was also compared with the effect of maceration on the considered responses. It has never given results better than centrifugation, whereas in the case of CT it represents an advantage to employ a three‐cycle centrifugation instead of one.     

Direct and rapid electrochemical immunosensing system based on a conducting polymer

A system device using multifunctional conjugated copolymer poly(5-hydroxy-1,4-naphthoquinone-co-hydroxy-2-thioacetic acid-1,4-naphthoquinone) acting both as immobilizing and transducing element for reagentless immunosensor has been constructed. Its functionality was evaluated in an antigen-antibody interaction model using ovalbumin-anti-ovalbumin. It was shown that the system specifically detects via electrochemical signal the antigen-antibody immune interaction in a reagentless context. Comparison to the conventional ELISA technique relevant to performance and sensitivity was presented.     

Ratiometric fluorescence transduction by hybridization after isothermal amplification for determination of zeptomole quantities of oligonucleotide biomarkers with a paper-based platform and camera-based detection

Paper is a promising platform for the development of decentralized diagnostic assays owing to the low cost and ease of use of paper-based analytical devices (PADs). It can be challenging to detect on PADs very low concentrations of nucleic acid biomarkers of lengths as used in clinical assays. Herein we report the use of thermophilic helicase-dependent amplification (tHDA) in combination with a paper-based platform for fluorescence detection of probe-target hybridization. Paper substrates were patterned using wax printing. The cellulosic fibers were chemically derivatized with imidazole groups for the assembly of the transduction interface that consisted of immobilized quantum dot (QD)–probe oligonucleotide conjugates. Green-emitting QDs (gQDs) served as donors with Cy3 as the acceptor dye in a fluorescence resonance energy transfer (FRET)-based transduction method. After probe-target hybridization, a further hybridization event with a reporter sequence brought the Cy3 acceptor dye in close proximity to the surface of immobilized gQDs, triggering a FRET sensitized emission that served as an analytical signal. Ratiometric detection was evaluated using both an epifluorescence microscope and a low-cost iPad camera as detectors. Addition of the tHDA method for target amplification to produce sequences of ∼100 base length allowed for the detection of zmol quantities of nucleic acid targets using the two detection platforms. The ratiometric QD-FRET transduction method not only offered improved assay precision, but also lowered the limit of detection of the assay when compared with the non-ratiometric QD-FRET transduction method. The selectivity of the hybridization assays was demonstrated by the detection of single nucleotide polymorphism.     

Colorimetric enantiodiscrimination of mandelic acid by indicator displacement assay

The colorimetric enantiodiscrimination between mandelic acid and L-proline-Cu(II) is exploited to develop enantioselective indicator displacement assays. The sensitivity of the assay could be tuned by using a colorimetric indicator. The chromophoric ligand, pyrocatechol violet, effectively competes with the mandelic acid guest for open coordination sites on L-proline-Cu(II). The DA could be increased to 0.12 by changing the ratio of(+)- and(à)-mandelic acid concentrations that were found to be optimal from the displacement experiments. The resultant enantiomer excess versus DA relationship is linear. From the calibration curves, the absorbance values of the unknowns may be calculated for the enantiomeric excess value and the colorimetric enantiodiscrimination of mandelic acid can thus be obtained.     

Online Flowing Colloidosomes for Sequential Multi‐analyte High‐Throughput SERS Analysis

3D plasmonic colloidosomes are superior SERS sensors owing to their high sensitivity and excellent tolerance to laser misalignment. Herein, we incorporate plasmonic colloidosomes in a microfluidic channel for online SERS detection. Our method resolves the poor signal reproducibility and inter‐sample contamination in the existing online SERS platforms. Our flow system offers rapid and continuous online detection of 20 samples in less than 5 min with excellent signal reproducibility. The isolated colloidosomes prevent cross‐sample and channel contamination, allowing accurate quantification of samples over a concentration range of five orders of magnitude. Our system demonstrates high‐resolution multiplex detection with fully preserved signal and Raman features of individual analytes in a mixture. High‐throughput multi‐assay analysis is performed, which highlights that our system is capable of rapid identification and quantification of a sequence of samples containing various analytes and concentrations.     

Development of an efficient protein phosphatase-based colorimetric test for okadaic acid detection

Okadaic acid (OA), responsible for gastrointestinal problems, inhibits protein phosphatase 2A (PP2A). Therefore, the inhibition exerted by the toxin on PP2A could be used to detect the presence of OA in aqueous solution and in shellfish sample.In this work, two commercial PP2As (from ZEU Immunotec and Millipore) and one produced by molecular engineering (from GTP Technology) were tested. Enzymes were used in solution and also immobilized within a polymeric gel. In solution, best performances were obtained using PP2A purchased from ZEU Immunotec (Spain). OA was detected in aqueous solution in concentration as low as 0.0124 μg L⁻¹ using the enzyme from ZEU Immunotec whereas the detection limits were 0.47 μg L⁻¹ and 0.123 μg L⁻¹ with PP2As from Millipore and GTP Technology, respectively. Considering that the immobilization step contributes to stabilize the PP2A activity, enzymes were entrapped within a photopolymer and an agarose gel. These different polymeric matrices were optimized, tested and compared. Agarose gel seems to be a good alternative to the photopolymer largely used in our group. For instance, the IC₅₀ value obtained with the test based on PP2A from ZEU Immunotec immobilized within an agarose gel was 1.98 μg L⁻¹. This value was 1.8-fold lower than those obtained with the photopolymer test using the same enzyme. The proposed test is sensitive, fast and does not require expensive equipment. To evaluate the efficiency of the assay, PP inhibition tests based on PP2A from ZEU Immunotec in solution or immobilized within a gel were used for OA detection in contaminated shellfish.