超声场下刚性界面附近溃灭空化气泡的速度分析

为了揭示刚性界面附近气泡空化参数与微射流的相互关系, 从两气泡控制方程出发, 利用镜像原理, 建立了考虑刚性壁面作用的空化泡动力学模型. 数值对比了刚性界面与自由界面下气泡的运动特性, 并分析了气泡初始半径、气泡到固壁面的距离、声压幅值和超声频率对气泡溃灭的影响. 在此基础上, 建立了气泡溃灭速度和微射流的相互关系. 结果表明: 刚性界面对气泡振动主要起到抑制作用; 气泡溃灭的剧烈程度随气泡初始半径和超声频率的增加而降低, 随着气泡到固壁面距离的增加而增加; 声压幅值存在最优值, 固壁面附近的气泡在该最优值下气泡溃灭最为剧烈; 通过研究气泡溃灭速度和微射流的关系发现, 调节气泡溃灭速度可以达到间接控制微射流的目的.     

The progress and perspective of strategies to improve tumor penetration of nanomedicines

Tumor penetration is important fo r effectively tumor targeting drug delivery.Recently,many researches are published to overcome the barriers that restrict tumor penetration and improve drug delivery efficiency.In the mini review,we first analyzed the barriers influence the tumor penetration,including tumor microenvironment barriers,nanoparticle properties,and interaction barriers between tumor and nanoparticles.To overcome the barrier,several strategies are developed,including modulating tumor microenvironment,changing particle size,transcytosis enabled tumor penetration,cell penetrating peptide modification and overcoming binding site barrier,which could effectively improve tumor penetration,and finally enhance tumor treatment outcome.     

NaN_3对玉米萌发过程中超弱光子辐射的影响

为了解读植物种子萌发过程中超弱光子辐射信息的生物学意义,采用呼吸抑制剂NaN3处理萌发玉米种子,跟踪测量和分析了玉米种子萌发过程中超弱光子辐射中自发光子辐射和外界光诱导的延迟光子辐射的变化规律,同时研究了萌发玉米种子鲜质量的变化.结果发现,NaN3同步抑制了萌发玉米自发光子辐射和鲜质量的增长,造成萌发玉米延迟光子辐射的初始光子数和延迟光子辐射积分强度大幅度降低,相干时间减小.机理分析表明,NaN3对呼吸代谢电子传递链的抑制造成的自由基反应减弱是萌发玉米自发光子辐射减小的原因,自发光子辐射强度可以作为玉米萌发状态的信号,延迟光子辐射动力学参数的大小可以表征萌发玉米呼吸代谢的强弱,相干时间是种子细胞组织序性的量度,通过对萌发种子超弱光子辐射的采集和分析可以实现对萌发种子细胞代谢和功能状态变化的灵敏和无损检测.     

Improving the flame retardancy of polyamide 6 by incorporating hexachlorocyclotriphosphazene modified MWNT

A nitrogen‐, phosphorus‐ and chlorine‐containing flame retardant, hexachlorocyclotriphosphazene (HCTP), has been covalently grafted onto the surface of multi‐wall carbon nanotubes (MWNT) to obtain MWNT‐HCTP. Polyamide 6 (PA6)/MWNT composites were then prepared via melt compounding. The flammability of PA6/MWNT composite was characterized by cone calorimetry, limiting oxygen index (LOI) and UL‐94 tests. The results showed that peak heat release rate of samples containing 3 wt% MWNT‐HCTP was only 460 kW/m², which decreased by 35.2% compared with that of a neat PA6 sample. The LOI value was increased from 22.7% to 26.5%, and UL‐94 test performance was also significantly improved by the presence of MWNT‐HCTP. Scanning electron microscope (SEM) and optical microscope analysis showed that modified MWNT had a better dispersion and compatibility in PA6 than unmodified MWNT. The composition of residue chars and volatile products was investigated by SEM/energy dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric‐FTIR, respectively. It was proposed that grafted HCTP was mainly functioned in the condensed phase, where P, N can synergistically promote char formation and Cl element can catch free radicals to terminate the chain reaction during combustion of the PA6 composite. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimental research of effects of different rotation radii on the growth rate of potassium dihydrogen phosphate crystals

Comparing with the traditional concentric rotation method (rotation radius is 0 cm), the effects of different rotation radii on the growth rate of KDP crystals were studied by experimental methods. It was found that with the increase of rotation radius from 0 cm, the growth rate of each direction of crystals first increased and then decreased in a size‐unchanged vessel. The smaller the distance between the crystal and vessel wall, the less the growth rate. This phenomenon was named the “wall collision effect”. Also, the value of growth rate reached a maximum when the rotation radius was about half of its allowable largest value in the size‐unchanged vessel. In addition, an increase of the rotation radius could improve the crystal growth rate under the same linear velocity of crystal movement. Finally, the uniformity of crystal growth has also been analyzed compared with the concentric rotation radius. It was found that the uniformity of crystal growth was best when the rotation radius was half of its allowable maximum value, and it was more conducive to the actual application of KDP crystals.     

新型环状聚(ε-己内酯-co-γ-三乙基硅氧基-ε-己内酯)的合成

设计合成了具有精确分子结构的聚合物对深入了解其结构与性能之间的关系起着至关重要的作用。研究了一种合成带有三乙基硅氧侧基的环状无规共聚酯的新方法。功能性单体γ-三乙基硅氧基-ε-己内酯(γ-Et3SiOεCL)和ε-己内酯(ε-CL)在环状引发剂2,2-二丁基-2-锡-1,3-二氧环庚烷(DSDOP)的作用下,进行活性开环聚合反应以制备活性环状无规共聚酯(LCP(εCLcoγEt3SiOεCL))前体,当单体完全转化后,以该活性环状前体作为大分子引发剂,引发反应性单体α-(1-丙烯酰氧乙基)-ε-己内酯(αAEεCL)进行嵌段聚合反应,合成了在活性中心附近带有不饱和双键的功能性环状嵌段共聚酯,即活性环状聚(ε-己内酯-co-γ-三乙基硅氧基-ε-己内酯)-b-(α-(1-丙烯酰氧乙基)-ε-己内酯)。最后该活性环状嵌段共聚酯在紫外光照射下,反应性单体结构单元中的双键发生分子内交联反应,从而制得稳定的不含有机锡的新型环状无规共聚酯cP(εCLcoγEt3SiOεCL)(Mn,NMR=28500)。采用SEC、1H NMR以及DSC等技术手段对聚合物的结构和性能进行表征。该方法的突出特点是能够高效地合成带有功能性侧基的高相对分子质量的环状无规共聚酯。     

Double‐Wall Carbon Nanotube–Porphyrin Supramolecular Hybrid: Synthesis and Photophysical Studies

Double‐wall carbon nanotubes (DWCNTs) with pyridyl units covalently attached to the external wall through isoxazolino linkers and carboxylic groups that have been esterified by pentyl chains are synthesized. The properties of these modified DWCNTs are then compared with an analogous sample based on single‐wall carbon nanotubes (SWCNTs). Raman spectroscopy shows the presence of characteristic radial breathing mode vibrations, confirming that the samples partly retain the integrity of the nanotubes in the case of DWCNTs, including the internal and external nanotubes. Quantification of the pyridyl content for both samples (DWCNT and SWCNT derivatives) is based on X‐ray photoelectron spectroscopy and thermogravimetric profiles, showing very similar substituent load. Both pyridyl‐containing nanotubes (DWCNTs and SWCNTs) form a complex with zinc porphyrin (ZnP), as evidenced by the presence of two isosbestic points in the absorption spectra of the porphyrin upon addition of the pyridyl‐functionalized nanotubes. Supramolecular complexes based on pyridyl‐substituted DWCNTs and SWCNTs quench the emission and the triplet excited state identically, through an energy‐transfer mechanism based on pre‐assembly of the ground state. Thus, the presence of the intact inner wall in DWCNTs does not influence the quenching behavior, with respect to SWCNTs, for energy‐transfer quenching with excited ZnP. These results sharply contrast with previous ones referring to electron‐transfer quenching, in which the double‐wall morphology of the nanotubes has been shown to considerably reduce the lifetime of charge separation, owing to faster electron mobility in DWCNTs compared to SWCNTs.     

High‐expression β1 adrenergic receptor/cell membrane chromatography method based on a target receptor to screen active ingredients from traditional Chinese medicines

β‐Adrenergic receptors are important targets for drug discovery. We have developed a new β₁‐adrenergic receptor cell membrane chromatography (β₁AR‐CMC) with offline ultra‐performance LC (UPLC) and MS method for screening active ingredients from traditional Chinese medicines. In this study, Chinese hamster ovary‐S cells with high β₁AR expression levels were established and used to prepare a cell membrane stationary phase in a β₁AR‐CMC model. The retention fractions were separated and identified by the UPLC–MS system. The screening results found that isoimperatorin from Rhizoma et Radix Notopterygii was the targeted component that could act on β₁AR in similar manner of metoprolol as a control drug. In addition, the biological effects of active component were also investigated in order to search for a new type of β₁AR antagonist. It will be a useful method for drug discovery as a leading compound resource.     

Modelling of a tubular solid oxide fuel cell with different designs of indirect internal reformer

The cell performance and temperature gradient of a tubular solid oxide fuel cell with indirect internal reformer(IIR-SOFC) fuelled by natural gas, containing a typical catalytic packed-bed reformer, a catalytic coated wall reformer, a catalytic annular reformer, and a novel catalytic annular-coated wall reformer were investigated with an aim to determine the most efficient internal reformer system. Among the four reformer designs, IIR-SOFC containing an annular-coated wall reformer exhibited the highest performance in terms of cell power density(0.67 W cm-2)and electrical efficiency(68%) with an acceptable temperature gradient and a moderate pressure drop across the reformer(3.53×10-5kPa).IIR-SOFC with an annular-coated wall reformer was then studied over a range of operating conditions: inlet fuel temperature, operating pressure, steam to carbon(S : C) ratio, gas flow pattern(co-flow and counter-flow pattern), and natural gas compositions. The simulation results showed that the temperature gradient across the reformer could not be decreased using a lower fuel inlet temperature(1223 K–1173 K)and both the power density and electrical efficiency of the cell also decreased by lowering fuel inlet temperature. Operating in higher pressure mode(1-10 bar) improved the temperature gradient and cell performance. Increasing the S : C ratio from 2 : 1 to 4 : 1 could decrease the temperature drop across the reformer but also decrease the cell performance. The average temperature gradient was higher and smoother in IIR-SOFC under a co-flow pattern than that under a counter-flow pattern, leading to lower overpotential and higher cell performance. Natural gas compositions significantly affected the cell performance and temperature gradient. Natural gas containing lower methane content provided smoother temperature gradient in the system but showed lower power density and electrical efficiency.