Effects of a liquid lithium curtain as the first wall in a fusion reactor plasma

This paper explores the effect of a liquid lithium curtain on fusion reactor plasma, such curtain is utilized as the first wall for the engineering outline design of the Fusion Experimental Breeder （FEB-E）. The relationships between the surface temperature of a liquid lithium curtain and the effective plasma charge, fuel dilution and fusion power production have been derived. Results indicate that under normal operation, the evaporation of liquid lithium does not seriously affect the effective plasma charge, but effects on fuel dilution and fusion power are more sensitive. As an example, it has investigated the relationships between the liquid lithium curtain flow velocity and the rise of surface temperature based on operation scenario II of the FEB-E design with reversed shear configuration and high power density. Results show that even if the liquid lithium curtain flow velocity is as low as 0.5 m/s, the effects of evaporation from the liquid lithium curtain on plasma are negligible. In the present design, the sputtering of liquid lithium curtain and the particle removal effects of the divertor are not yet considered in detail. Further studies are in progress, and in this work implication of lithium erosion and divertor physics on fusion reactor operation are discussed.[第一段]     

Kerr-Newman-de Sitter黑洞的统计熵

避开求解波动方程的困难，利用量子统计的方法，直接计算Kerr-Newman-de Sitter黑洞背景下玻色场和费米场的配分函数.然后利用砖墙膜模型计算和讨论黑洞背景下的玻色场和 费米场的熵. 关键词： 量子统计 砖墙膜模型 Kerr-Newman-de Sitter黑洞 统计熵     

静止水中单个上升气泡的直接数值模拟

本文发展了基于Front Tracking的直接数值模拟方法研究气液两相界面的迁移特性,该方法对气液两相采用半隐式的分步法直接求解N-S方程,耦合Front Tracking Method获得两相界面的三维变形。针对无边界以及垂直壁面附近静止水中的单个气泡上升过程进行模拟,研究气泡运动的机理以及气泡与壁面的相互作用。数值模拟准确再现了气泡的上升过程和变形,不同Re数下气泡的上升速度计算结果同经验关联式非常吻合,验证了该方法的有效性。随后分析了气泡周围流场的结构,发现壁面对气泡周围流场的抑制是壁面对气泡作用力的主要原因,将导致气泡逐渐偏离垂直壁面。     

水喷射淬冷高温壁面的传热实验研究

本文采用直接表面温度测量的方法对水喷射高温壁面的传热过程进行实验研究．系统地研究了射流出口速度、冷却水过冷度、喷嘴至加热面的间距、初始壁温以及水喷雾的流量密度等参数对淬冷表面的膜态沸腾、最小临界点、过渡沸腾、最大临界点等传热过程的影响，给出了有关实验结果，分析了它们的特点。     

Bounds on the Mass for the High Dimensional Gaussian Lattice Field between Two Hard Walls

We consider the d(≥3)-dimensional Gaussian lattice field confined between two hard walls. We show that the field becomes massive and identify the precise asymptotic behavior of the mass and the variance of the field as the height of the wall goes to infinity.     

The use of acoustic radiation forces to position particles within fluid droplets

Handling of micrometer sizes particles, such as biological cells or coated beads, plays a relevant role in the field of life science. A number of devices have been presented in the last years, in which acoustic forces generated by coupling the vibration of a solid structure excited by a piezoelectric transducer to the particle suspension are used to collect particles in lines or position them in clumps on a grid. Following the trend of lab-on-a-chip devices, efforts have been made to shrink the size of such systems, aiming at less reagent consumption and shorter reaction times. The majority of these systems consist of closed fluid filled volumes, typically channels. Here the use of an open fluid volume, a droplet, is examined. By exciting resonances into the droplet positioned on a surface, particles can be gathered into a line, two parallel lines or, as the frequency of excitation is increased, into more complex patterns. Such a concentration process will have useful applications in improved detection sensitivity of low concentration particulate solutions.     

EAST超导托卡马克装置真空室壁处理的研究

壁处理技术被广泛应用于托卡马克装置上,以降低装置本底杂质水平,改善器壁的再循环.自2008年起,EAST面向等离子体的第一壁采用全碳材料,由于特殊的石墨晶体多孔结构,具有高放气率以及对H₂O,H₂等杂质气体的高吸附性,从而使等离子体放电前期的装置真空室壁处理尤为关键.本文介绍了EAST装置真空室壁处理的实验系统,并研究了装置烘烤与不同工作气体及工作参数下的直流辉光放电清洗对杂质粒子的清除效果.实验结果表明:EAST装置真空室在经过长时问的前期壁处理后,显著地降低了真空室内壁的出气率与本底杂质浓度,这对随后进行的等离子体放电实验非常有必要.     

A general 3-D nonlinear magnetostrictive constitutive model for soft ferromagnetic materials

In this paper, a new general nonlinear magnetostrictive constitutive model is proposed for soft ferromagnetic materials, and it can predict magnetostrictive strain and magnetization curves under various pre-stresses. From the viewpoint of magnetic domain, it is based on the important physical fact that a nonlinear part of the elastic strain produced by magnetic domain wall motion under a pre-stress is responsible for the change of the maximum magnetostrictive strain in accordance with the pre-stress. Then the reduction of magnetostrictive strain from the maximum is caused by the domain rotation. Meanwhile, the magnetization under various pre-stresses in this model is introduced by magnetostrictive effect under the same pre-stress. A simplified 3-D model is put forward by means of linearizing the nonlinear function, i.e. the nonlinear part of the elastic strain produced by domain wall motion, and by using the quartic of magnetization to describe domain rotation. Besides, for the convenience of engineering applications, two-dimensional (plate or film) and one-dimensional (rod) models are also given for isotropic materials and their application ranges are discussed too. In comparison with the experimental data of Kuruzar and Jiles, it is found that this model can predict magnetostrictive strain and magnetization curves under various pre-stresses. The numerical simulation further illustrates that the new model can effectively describe the effects of the pre-stress or residual stress on the magnetization and magnetostrictive strain curves. Additionally, this model can be degenerated to the existing magnetostrictive constitutive model for giant magnetostrictive materials (GMM), i.e. a special soft ferromagnetic material.     

Dynamics of sandwich domain structure in Co-based amorphous ribbons with helical magnetic anisotropy: Part I

The distribution of axes of easy magnetization close to a homogeneous distribution is revealed in each half-thickness of a ribbon after annealing it in a helical magnetic field. The transition from magnetic reversal of a ribbon by the displacement of two domain walls formed near a middle plane of a ribbon to magnetic reversal of a ribbon by displacement of two domain walls formed near to the main surfaces of a ribbon is found out during each half-period of a magnetic reversal.     

双光子激发荧光成像技术对小鼠植入前胚胎的实时观测

双光子激发的蓝移效应可使利用同一束超快激光同时激发多种不同荧光特性的生物荧光染料的设想得以实现。选取锁模飞秒掺钛蓝宝石(Ti-sapphire)激光器输出的730nm激光,分别激发Hoechst33342,Fluo-4,PI和Indo-1四种常用生物荧光染料,分别利用(455±15)nm,(540±15)nm,(580±16)nm和(500±15)nm四种滤光片获得特异性荧光图像。结合双光子激发荧光成像技术穿透深,光损伤小,信噪比好等优势,选取合适的荧光染料组,应用单束激光激发、双染双通道成像方法,对小鼠植入前胚胎内细胞中的钙信号和染色体进行三维、四维实时成像,为探究小鼠植入前胚胎发育规律提供一种全新的多参数观测手段。