极低频高压脉冲电场对萌发玉米种子超弱发光的影响

生物超弱发光是来自细胞的电磁信号,在揭示电磁生物学效应的机理研究中具有重要作用.为了研究极低频脉冲电场生物学效应及其机理,采用基于玉米细胞电位波动频率的1 Hz极低频高压脉冲电场处理萌发玉米种子,结果发现玉米种子的萌发过程明显加快,根长和芽长均有显著增长.对萌发种子的自发发光和延迟发光的测量结果显示,1 Hz极低频高压脉冲电场对萌发过程中玉米种子的自发发光和延迟发光积分强度都有明显的促进作用,表明1 Hz极低频高压脉冲电场加速了玉米种子萌发过程中的DNA合成和细胞代谢.     

火焰原子吸收光谱法测定钴-镍合金镀层中的钴和镍

利用原子吸收光谱法研究了在氨基磺酸钴-镍镀液中，赫尔槽试片上不同电流密度区合金镀层中钴、镍的含量。实验表明，该方法简便，快捷，结果准确，精密度高。相对标准偏差（RSD）为0.30%-0.62%，加标回收率为97.0%-104.0%。     

细胞培养基的吸收光谱研究

使用日本岛津UV 310 1分光光度计分别测量培养了宫颈癌细胞 (Hela)和鼻咽癌细胞 (CNE)的RP MI 16 4 0培养基和DMEM高糖培养基的紫外吸收光谱 ,分析了培养基中蛋白质的紫外吸收特性。RPMI16 4 0培养基的 2 2 7nm吸收峰在培养细胞生长过程中位移至 2 2 2或 2 18nm ,2 78nm的吸收峰位移至 2 80nm ;而DMEM高糖培养基 2 2 4nm吸收峰在培养细胞生长过程中位移至 2 2 1nm附近 ,2 78nm吸收峰基本没有位移。这些位移说明培养基中芳香族氨基酸中各种氨基酸如色氨酸和酪氨酸的含量有变化。也就是说 ,癌细胞在生长过程中对色氨酸和酪氨酸的消耗不是按等量比的。实验也说明Hela和CNE在生长过程中 ,对RPMI 16 4 0培养基和DMEM高糖培养基中氨基酸的消耗是不同的。实验结果为癌细胞生长过程中所需培养基中氨基酸的含量提供了依据     

A cell functional minimization scheme for parabolic problem

We are interested in a robust and accurate finite volume scheme for 2-D parabolic problems derived from the cell functional minimization approach. The scheme has a local stencil, is locally conservative, treats discontinuity rigorously and leads to a symmetric positive definite linear system. Since the scheme has both cell centered unknowns and cell edge unknowns, the computational cost is an issue and a parallel algorithm is then suggested based on nonoverlapping domain decomposition approach. The interface condition is of the Dirichlet–Robin type and has a parameter λ. By choosing this parameter properly, the convergence of the iteration process could be sped up. Numerical results for linear and nonlinear problems demonstrate the good performance of the cell functional minimization scheme and its parallel version on distorted meshes.     

A fluorescent chemosensor for Cu2+ ions and its application in cell imaging

A new on-off fluorescent probe 1 for Cu²⁺ based on Schiff base compound was designed and synthesized by one-step reaction. The single probe 1 exhibited strong green fluorescence emission. A fluorescence quenching effect and faint color change were observed as soon as the Cu²⁺ was added to the probe system in H₂O/EtOH (v/v = 8:2, HEPES buffer, 0.05 M, pH = 7.4) solution. Other common metal cations did not cause the changes in the fluorescence and color of the probe 1. The optical properties were studied by the fluorescence emission and UV–Vis spectra. Meanwhile, the geometry optimizations of probe 1 and the [1-Cu²⁺] coordination complexes were also carried out by DFT using the Gaussian 09 program, in which the B3LYP function was used. Based on experimental measurement and theoretical analysis, we can know that the combination ratio of the probe and Cu²⁺ is 2:1 and the limit of detection (LOD) is as low as 5.3 × 10^?9 M Besides, the probe 1 was also used to analyze the Cu²⁺ in living cells.     

Cooperation within the Small Cell: The indoor,correlated shadowing case

The deployment of Small Cells in fourth generation (4G) communication systems is aimed at providing significant capacity improvements and higher availabilities. However, the design of Small Cell systems in indoor environments is especially challenging due to high shadowing attenuation induced by clutter and human blockage. This paper studies node cooperation and multiple relaying and proposes novel analytical formulas for the outage probability of cooperative Small Cells suffering from shadowing. The channel fading gains are modeled as correlated lognormal random variables, in order to reflect the properties of indoor propagation environments. Various cooperative strategies are considered, taking into account the use of one or two relays and different receiver combining techniques. In addition, the relative performance of each cooperative configuration and the benefit of cooperation over non-cooperation are investigated. Finally, interesting and useful insights are produced regarding the impact of the correlated lognormal environment parameters on the configuration of cooperative Small Cells.     

Influence of cell packing by centrifugation on 40-MHz ultrasound backscatter

High-frequency ultrasound (HFUS) signals backscattered from RBL-2H3 cell pellets prepared under different centrifugal forces were analyzed to investigate the packing effect of cell aggregates. The measurements were performed in a pulse-echo setup with a 40-MHz transducer. The changes of ultrasound signals from cell pellet in backscattered power, statistical parameter, and pellet thickness were monitored after centrifugation at between 100g and 1600g. Experimental results showed that the HFUS backscattered power from cell pellets was inversely proportional to centrifugal force and increased to a plateau within 1-2 h after centrifugation. The initial thickness of cell pellets decreased with higher centrifugal force, but the changes in thickness and time that took to reach a plateau increased at higher centrifugal force. The envelope statistics of backscattered signals with Nakagami distribution indicates that the centrifugal force and elapsed time after centrifugation affected the backscattering characteristics. The present study suggests that centrifugal force and data acquisition time after cell pellet formation should be considered in in vitro cell packing method with centrifugation to emulate the tissue in vivo.     

Characterization of Compounds Acting on the α1A Adrenergic Receptor from Caulis spatholobi by Cell Membrane Chromatography with Possible Application for Treatment of Benign Prostatic Hyperplasia

Tamsulosin hydrochloride is a commonly used drug for treatment of benign prostatic hyperplasia which is a disease affecting elderly men. However, adverse reactions may occur when tamsulosin hydrochloride is used for long-term treatment. Caulis spatholobi is a traditional Chinese medicine with many pharmacological effects. In this study, a cell membrane chromatography column was combined with high-performance liquid chromatography–mass spectrometry to determine the active compounds acting on α1A adrenergic receptor from Caulis spatholobi. Formononetin was shown to be active on the α1A adrenergic receptor. This was investigated by a competitive binding assay that demonstrated that tamsulosin hydrochloride and formononetin employ the same binding sites. Thus, formononetin is a potential α1A adrenergic receptor antagonist for treating benign prostatic hyperplasia.     

Investigation on cell biocompatible behaviors of polyaniline film fabricated via electroless surface polymerization

Considering for the potential application in tissue engineering, polyaniline (PANi) film was fabricated via a two-step route: a self-assembled monolayer of C₆H₅NHC₃H₆Si(OMe)₃ was firstly formed on the single-crystal Si substrate; the conducting PANi film was then prepared through electroless surface polymerization of the aniline molecules on the aniline monolayer-bearing silane surface in an acidic aqueous solution. The formation of PANi film on Si surface was confirmed by characterizations of X-ray photoelectron spectroscope (XPS) and specular reflectance Fourier transform infrared (SR-FTIR) spectrum, etc. At last, the proliferation behaviors of PC-12 cells on the PANi film surface were studied by the [3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide] (MTT) colorimetric assays, acridine orange fluorometric staining, and scanning electron microscope (SEM) observation, etc. The results demonstrate that the as-prepared PANi film provides high ability for cell proliferation, exhibiting promising potentials as surface coating to cultivate neuronal cells for applications in the tissue engineering.     

Engineering quadrupole magnetic flow sorting for the isolation of pancreatic islets

Quadrupole magnetic flow sorting (QMS) is being adapted from the separation of suspensions of single cells (<15 μm) to the isolation of pancreatic islets (150–350 μm) for transplant. To achieve this goal, the critical QMS components have been modeled and engineered to optimize the separation process. A flow channel has been designed, manufactured, and tested. The quadrupole magnet assembly has been designed and verified by finite element analysis. Pumps have been selected and verified by test. Test data generated from the pumps and flow channel demonstrate that the fabricated channel and peristaltic pumps fulfill the requirements of successful QMS separation.