Design,synthesis and docking studies of new hydrazinyl-thiazole derivatives as anticancer and antimicrobial agents

Increase in the number of infections caused by pathogenic microbes in cancer patients has prompted the searcher to invest in the development of agents having dual anticancer and antimicrobial properties. The present study is concerned with synthesis and screening for anticancer and antimicrobial activity of a series of 5-hydrazinyl-2-(2-(1-(thien-2-yl)ethylidene)hydrazinyl)thiazole derivatives. The structure elucidation of the synthesized hydrazinyl thiazole derivatives was illustrated by spectroscopic and elemental analysis. All the newly synthesized compounds 5a-p were evaluated for in-vitro cytotoxic activity against breast carcinoma (MCF-7 cell line), hepatocellular carcinoma (HePG-2) and colorectal cancer (HCT-116) cell lines using MTT assay method. Compounds 5 g, 5h showed broad spectrum activity against three cancer cell lines with IC₅₀ ranged from 3.81 to 11.34 µM in compared to the reference drug Roscovitine (IC₅₀ = 9.32 to 13.82 µM), while compounds 5 l and 5 m were found to be more selective against HePG-2 and HCT-116 cell line (IC₅₀ = 9.29 and 8.93 µM respectively) and compound 5j was more selective against HePG-2 and MCF-7 cell lines (IC₅₀ = 6.73 and 10.87 µM respectively). The inhibitory activity of the most promising compounds was tested against the EGFR and ARO enzymes and were further tested for apoptosis and Annexin V/PI staining. The results of enzyme-based tests revealed that the tested compound 5j has a dual inhibitory effect on the EGFR and ARO enzymes with IC₅₀ = 82.8 and 98.6 nM respectively in compared to the reference drugs Erlotinib and Letrozole (IC₅₀ = 62.4 and 79 nM respectively). Furthermore, the majority of the tested hydrazinyl thiazole derivatives exhibited significant antimicrobial activity against the used pathogenic microbes species. Compounds 4b, 5h, 5j and 5 m exerted a good antibacterial and antifungal activity against all tested pathogenic microbes. Therefore, it was concluded that compounds 5 h, 5j and 5 m proved to possess dual anticancer and antimicrobial agent and may serves as a useful lead compounds in search for further modification or derivatization to give more potent and selective agents.     

黏惰化及酸敏感修饰对纳米粒子黏膜穿透的影响

使用纳米粒子进行疾病的诊断和治疗是当前研究的一个热点. 由于受到黏液层的阻碍, 纳米粒子对于黏膜上皮细胞的进入效果不佳, 从而限制了其对黏膜相关疾病的诊断和治疗. 本文设计合成了一种具有黏惰性的酸敏感纳米粒子(MSNs-pCBMA-DMMA), 可有效穿透黏液层进入黏膜上皮细胞. 首先采用溶胶-凝胶法合成了表面氨基化的介孔二氧化硅纳米粒子(MSNs-NH₂), 然后通过原子转移自由基聚合法(ATRP)使两性离子羧基甜菜碱甲基丙烯酸酯(CBMA)在MSNs-NH₂表面上聚合形成聚羧基甜菜碱甲基丙烯酸酯(pCBMA), 获得惰性化的粒子(MSNs-pCBMA), 最后将酸响应性分子2,3-二甲基马来酸酐(DMMA)修饰于MSNs-pCBMA表面, 制备了MSNs-pCBMA-DMMA. 场发射透射电子显微镜(TEM)、 傅里叶变换红外光谱(FTIR)、 氢核磁共振波谱(¹H NMR)和纳米粒度Zeta电位测定仪等分析结果表明, 本文合成了MSNs-pCBMA-DMMA, 且粒子表面电位随pH值降低显著增加, 在pH=7.4~5.7范围内具有酸敏感能力. Transwell^?小室实验表明, pCBMA的接枝提高了粒子在模拟黏液中的渗透速率, 而DMMA的修饰则进一步增强了粒子的扩散能力, 4 h内MSNs-pCBMA-DMMA的模拟黏液渗透率达到16.3%, 为MSNs-pCBMA的1.9倍, MSNs-NH₂的3倍, 而以MSNs-NH₂的表观渗透系数（P_app）为标准计算得到的MSNs-pCBMA-DMMA的相对表观渗透系数达到了2.96. 细胞毒性试验验证MSNs-pCBMA-DMMA粒子的生物安全性良好. 细胞摄取试验表明, 相比于其它粒子MSNs-pCBMA-DMMA能够更快的被黏膜上皮细胞摄取. 本文所构建的纳米粒子能够快速渗透黏液且易于被黏膜上皮细胞摄取, 为其应用于黏膜相关疾病的活体诊断和治疗提供了基础.     

有机分析研究进展——单原子、单分子、单细胞的分析进展

简要地对单原子、单分子、单细胞的分析方法和研究进展情况进行了评述 ,共引用文献 193篇     

燃料电池用质子交换膜的研究进展

质子交换膜燃料电池 (PEMFC)以质子交换膜 (PEM )作为电解质和隔膜 ,其性能强烈地依靠PEM的性质 .本文分析了PEMFC对PEM的要求 ,对全氟化、部分氟化和非氟化的PEM进行了分类介绍 ,着重讨论了膜的结构、制备、性质以及它们在PEMFC中的应用     

白血病细胞酶联免疫酶催化银沉积于插指电极阵列电化学免疫分析新方法

建立了一种检测白血病细胞表面抗原的细胞酶联免疫电化学分析新方法. 该方法兼有细胞酶联免疫分析抗原、抗体结合的特异性和插指电极阵列酶催化银沉积电化学分析的灵敏性. 在聚苯乙烯微孔板中包被白血病细胞, 先后加入鼠抗人抗体及碱性磷酸酶(ALP)标记的马抗鼠抗体, ALP催化抗坏血酸磷酸酯(AAP)水解成抗坏血酸(AA), AA使银离子还原成银单质并沉积到插指电极阵列表面, 导致插指电极阵列上相邻两个梳齿导通. 通过对电导率的测定, 可实现对细胞表面抗原的高灵敏分析. 此分析方法灵敏度高(可检测出50个左右的HL-60细胞)、特异性好, 且可用于大量样品的分析, 为白血病等肿瘤疾病的早期诊断和免疫分型提供了新技术. 此外, 该方法也可用于细胞表面分子基因工程抗体活性的检测.     

High Resolution Crossed Beams Scattering Study of the F＋HD→DF＋H Reaction

Crossed beams scattering study was carried out on the F＋HD→DF＋H reaction using high- resolution H-atom Rydberg tagging time-of-flight technique. Vibrational state-resolved differential cross sections were measured, with partial rotational state resolution, at eight collision energies in the range of 2.51-5.60 kJ/mol. Experimental results indicated that the product angular distributions are predominantly backward scattered. As the collision energy increases, the backward scattered peak becomes broader gradually. Dependence of product vibration branching ratios on the collision energy was also determined. The experimental results show that the DF products are highly inverted in the vibrational state distribution and the DF （v＇=3） product is the most populated state. Furthermore, the DF （v＇=l） product has also been observed at collision energy above 3.97 kJ/mol.     

Evaluation of photodynamic therapy (PDT) procedures using microfluidic system

A hybrid PDMS/glass microfluidic system for evaluation of the efficiency of photodynamic therapy is presented. 5-aminolevulinic acid (ALA) was used as a precursor of photosensitizer. The geometry of the microdevice presented in this paper enables to test different concentrations of the photosensitizer in a single assay. The viability of the A549 cells was determined 24 h after PDT procedure (irradiation with light which induced a photosensitizer accumulated in carcinoma cells, λ = 625 nm). The presented results confirmed the possibility to perform the photodynamic therapy process in vitro in microscale and the possibility to assess its effectiveness. Moreover, because two identical microstructures on a single chip were performed, the microchip can be used for examination simultaneously various cell lines (carcinoma and normal) or various photosensitizers.     

Physics-based plasticity model incorporating microstructure changes for severe plastic deformation

During machining processes, materials undergo severe deformations that lead to different behavior than in the case of slow deformation. The microstructure changes, as a consequence, affect the materials properties and therefore influence the functionality of the component. Developing material models capable of capturing such changes is therefore critical to better understand the interaction process–materials. In this paper, we introduce a new physics model associating Mechanical Threshold Stress (MTS) with Dislocation Density (DD) models. The modeling and the experimental results of a series of large strain experiments on polycrystalline copper (OFHC) involving sequences of shear deformation and strain rate (varying from quasi-static to dynamic) are very similar to those observed in processes such as machining. The Kocks–Mecking model, using the mechanical threshold stress as an internal state variable, correlates well with experimental results and strain rate jump experiments. This model was compared to the well-known Johnson–Cook model that showed some shortcomings in capturing the stain jump. The results show a high effect of rate sensitivity of strain hardening at large strains. Coupling the mechanical threshold stress dislocation density (MTS–DD), material models were implemented in the Abaqus/Explicit FE code. The model shows potentialities in predicting an increase in dislocation density and a reduction in cell size. It could ideally be used in the modeling of machining processes.     

双光子激发荧光成像技术对小鼠植入前胚胎的实时观测

双光子激发的蓝移效应可使利用同一束超快激光同时激发多种不同荧光特性的生物荧光染料的设想得以实现。选取锁模飞秒掺钛蓝宝石(Ti-sapphire)激光器输出的730nm激光,分别激发Hoechst33342,Fluo-4,PI和Indo-1四种常用生物荧光染料,分别利用(455±15)nm,(540±15)nm,(580±16)nm和(500±15)nm四种滤光片获得特异性荧光图像。结合双光子激发荧光成像技术穿透深,光损伤小,信噪比好等优势,选取合适的荧光染料组,应用单束激光激发、双染双通道成像方法,对小鼠植入前胚胎内细胞中的钙信号和染色体进行三维、四维实时成像,为探究小鼠植入前胚胎发育规律提供一种全新的多参数观测手段。     

新型BODIPY荧光染料的合成及光谱性质研究

传统的BODIPY荧光染料具有荧光量子效率高、摩尔消光系数大、紫外吸收和荧光发射峰窄等优点,然而这类荧光染料普遍存在荧光发射波长短和Stokes位移小的缺点,因而限制了它们在体内生物传感及成像方面的广泛应用。为了得到荧光发射波长较长和Stokes位移大的BODIPY荧光染料,以BODIPY母核为基本结构,通过在它的8位连接吸电子性质的酯基来增加分子内电荷转移程度,同时在其3,5位引入供电子的芳香取代基增加分子的π共轭结构,合成得到了一类8位酯基取代的新型BODIPY荧光染料。所得到的新型BODIPY荧光染料的化学结构经过1H NMR, 13C NMR和HR-MS得以确认。光谱测试结果表明,这类染料的紫外吸收光谱(λ_abs=536 nm)和荧光发射光谱(λ_em=592 nm)与普通的BODIPY相比都发生显著红移(80 nm),并且保持了较高的荧光量子效率(Ф=0.43)。此外,这类BODIPY荧光染料的紫外可见吸收光谱和荧光发射光谱几乎完全分开,Stokes位移长达60 nm,可以有效地避免自吸收和生物样品的背景干扰。密度泛函理论计算结果表明,这种相对较大的Stokes位移主要是由于染料分子在基态和激发态下不同的几何构型所造成的。该类化合物的光物理性能受溶剂的影响小,是一类性能优良的新型荧光染料。细胞成像结果表明,染料1具有良好的细胞渗透性和光稳定性,可以实现对细胞的荧光成像。