Improved estimation of duality gap in binary quadratic programming using a weighted distance measure

We present in this paper an improved estimation of duality gap between binary quadratic program and its Lagrangian dual. More specifically, we obtain this improved estimation using a weighted distance measure between the binary set and certain affine subspace. We show that the optimal weights can be computed by solving a semidefinite programming problem. We further establish a necessary and sufficient condition under which the weighted distance measure gives a strictly tighter estimation of the duality gap than the existing estimations.     

A three-dimensional in vitro culture model for primary neonatal rat ventricular myocytes

To overcome bad prognosis of patients with heart failure and the lack of organ donors, cardiac tissue engineering has developed as a biomimetic approach to repair, replace, and regenerate the damaged cardiac tissue. During the past decade years, researchers are devoted to find different natural and/or synthetic materials that can build appropriate physical structures to contain and organize implanted cells. In this study, we present a new method for primary neonatal rat cardiomyocytes culture in vitro using alginate/collagen/chitosan hydrogel. To investigate the feasibility of this material as scaffold for cardiac myocytes, neonatal rat ventricular myocytes were isolated and encapsulated in alginate-based beads cross-linked with calcium ion. The growth of cells was evaluated by staining with α-Sarcomeric actin (α-SCA) and Troponin T type 2 (TNNT2), and the viability of cardiomyocytes was studied in vitro by assessing the expression levels of several cardiac ion channels, including CACNL1A1, Connexin 43 and SCN5A. The results showed a significant increase in cardiac myocytes number, and the expression levels of CACNL1A1, Connexin 43 (Cx43) were up-regulated significantly except SCN5A, as compared with two-dimensional cultures. Moreover, extracellular matrix produced by the seeded cells themselves was observed by staining with fibronectin. Taken together, these findings indicate that this alginate/collagen/chitosan hydrogel bead is suitable for supporting the growth and retaining the morphologic and electrophysiologic characteristics of primary cultured rat cardiac muscle cells.     

明胶改性聚醚醚酮微载体的制备、表征及性能

微载体因其具有较高的表面积/体积比等优点可以大大提高哺乳动物细胞培养效率,被广泛应用于生物制药和组织工程等领域。 但微载体多为一次性使用,不耐高温,且主要依赖进口,价格昂贵,因而限制了其国内的应用和推广。 聚醚醚酮(PEEK)材料具有良好的生物相容性、化学稳定性及耐高温等特性,是一种优异的微载体材料,但存在熔点高,加工方法单一和生物惰性等缺陷。 本文以浓硫酸为溶剂,乙醇溶液为萃取剂,采用气流辅助滴注/相分离法,将PEEK制备成448 μm左右,尺寸均匀的微球;经氨丙基三乙氧基硅烷(APTES)处理,获得表面氨基化修饰的PEEK微球(PEEK-N);进一步,以N,N'-羰基二咪唑(CDI)为活性中间体,将明胶分子接枝到PEEK-N微球表面,获得表面明胶修饰的PEEK微载体(PEEK-G)。 对材料的物理化学性质、表面接枝量进行表征;并通过体外细胞实验评估其细胞毒性、细胞粘附效率和细胞增殖能力。 结果显示,通过该方法制备成功了3种不同明胶接枝含量的PEEK细胞微载体(PEEK-G1,PEEK-G2,PEEK-G3),其中明胶含量较高的PEEK-G3毒性最低,细胞粘附和增殖效果最理想。     

Modelling toxin effects on protein biosynthesis in eukaryotic cells

We present a rather generic model for toxin (ricin) inhibition of protein biosynthesis in eukaryotic cells. We also study reduction of the ricin toxic effects with application of antibodies against the RTB subunit of ricin molecules. Both species initially are delivered extracellularly. The model accounts for the pinocytotic and receptor-mediated toxin endocytosis and the intact toxin exocytotic removal out of the cell. The model also includes the lysosomal toxin destruction, the intact toxin motion to the endoplasmic reticulum (ER) for separation of its molecules into the RTA and RTB subunits, and the RTA chain translocation into the cytosol. In the cytosol, one portion of the RTA undergoes degradation via the ERAD. The other its portion can inactivate ribosomes at a large rate. The model is based on a system of deterministic ODEs. The influence of the kinetic parameters on the protein concentration and antibody protection factor is studied in detail.     

Fabrication of the First Disposable Three‐dimensional Paper‐based Concentration Cell as Ammonia Sensor with a New Method for Paper Hydrophobization by Laser Patterned Parafilm®

A new, simple and low‐cost method for patterning hydrophobic barriers in porous support such as paper by Parafilm® has been introduced. This method is then used for electrochemical paper‐based ammonia sensor construction. Ammonia sensor is based on electrochemical concentration cell which ammonia reaction with electrolyte in halves cell caused in concentration gradient and therefore potential difference dependent on ammonia concentration. The effect of concentrations of the involved chemicals, time periods of the required processes, the presence of Faraday cage as well as the effects of different salts used in the salt bridge on the response of the sensor, were investigated in order to find the optimized conditions.     

Numerical simulation of indoor suspension particles based on v-f model

This paper presents a new algorithm for the prediction of indoor suspension particle dispersion based on a v²-f model. In order to handle the near-wall turbulence anisotropy properly, which is significant in the dispersion of fine particles, the particle eddy diffusivity is calculated using different formulae among regions of the turbulent core and in the vicinity of walls. The new algorithm is validated by several cases performed in two ventilated rooms with various air distribution patterns. The simulation results reveal that v²-f nonlinear turbulence model combined with a particle convective equation gives satisfactory agreement with the experimental data. It is generally found that the dynamic equation combined with the v²-f model can properly handle low Reynolds number (LRN) flows which are usually encountered in indoor air flows and fine particle dispersion.     

Preparation of 17β‐estradiol surface molecularly imprinted polymers and their application to the analysis of biological samples

17β‐Estradiol (E2) surface molecularly imprinted polymers have been prepared using functionalized monodispersed poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) beads as a support. The resulting polymers were found to be uniform in size (5 μm), and the surfaces of the microspheres possessed large pore‐like structures. A chromatographic experiment demonstrated that the resulting microspheres exhibited high levels of recognition and selectivity toward the target molecule. The particles were employed as a novel sorbent in a molecularly imprinted SPE protocol. A method was then developed involving the combination of the pretreatment with HPLC to determine the levels of estrogen secreted from Michigan Cancer Foundation‐7 cells. The obtained results revealed that the extraction recoveries of E2 from real samples were in the range of 73.0–97.5% with RSDs of < 7.5% (n = 3). Calibration curves were established with R values > 0.9996 for concentrations in the range of 0.50–100.00 ng/mL. The LOD of this new method was 0.14 ng/mL. Compared with traditional C₁₈ SPE agents, the particles showed high selectivity and extraction efficiency for E2 in the pretreatment process. The particles could therefore be used to determine trace estrogen in biological samples with a UV detector only.     

Residual determination and risk assessment of buprofezin in plum (Prunus domestica) grown in open‐field conditions following the application of three different formulations

This study was conducted to characterize the residual level and perform a risk assessment on buprofezin formulated as an emulsifiable concentrate, wettable powder, and suspension concentrate over various treatment schedules in plum (Prunus domestica). The samples were extracted with an AOAC quick, easy, cheap, effective, rugged, and safe, ‘QuEChERS’, method after major modifications. As intrinsic interferences were observed in blank plum samples following dispersive‐solid phase extraction (consisting of primary secondary amine and C₁₈ sorbents), amino cartridges were used for solid‐phase extraction. Analysis was carried out using liquid chromatography with diode array detection and confirmed by liquid chromatography–tandem mass spectrometry. The method showed excellent linearity with determination coefficient (R² = 1) and satisfactory recoveries (at two spiking levels, 0.5 and 2.5 mg/kg) between 90.98 and 94.74% with relative standard deviation (RSD) ≤8%. The limit of quantification (0.05 mg/kg) was considerably lower than the maximum residue limit (2 mg/kg) set by the Codex Alimentarius. Absolute residue levels for emulsifiable concentrates were highest, perhaps owing to the dilution rate and adjuvant. Notably, all formulation residues were lower than the maximum residue limit, and safety data proved that the fruits are safe for consumers. Copyright © 2016 John Wiley & Sons, Ltd.     

SYNTHESIS OF A NOVEL POLYSACCHARIDE HYDROGEL

ABSTRACT

A modified hyaluronic acid (HA) biopolymer was synthesized that can be photocrosslinked to form a stable hydrogel. The chemical and physical properties including the amount of modification of the polymer with methacrylate anhydride, the viscosity of the modified biopolymer, and the solute diffusion characteristics of the polymer have been determined.