The boundary condition at the air–liquid interface and its effect on film drainage between colliding bubbles

The drainage of thin liquid films between colliding bubbles is strongly influenced by the boundary conditions at the air–liquid interface. Theoretically, the interface should not resist any tangential stress (fully mobile) in a clean water system, resulting in very fast film drainage and coalescence between bubbles within milliseconds. In reality, under most experimental and industrial conditions, the presence of impurities or surfactants can immobilize the interface and significantly hinder bubble coalescence by several orders of magnitude. In this opinion, we introduce the recent progress on understanding the boundary conditions at the air–water interface, and how they may affect the outcome of bubble collisions. The transition from mobile to immobile boundary conditions in the presence of contaminations is discussed. Despite the considerable recent progress, there are still experimental and theoretical challenges remaining on this topic, for example, finding the mechanism for hindered bubble coalescence by high salt concentrations.     

High Na+ Mobility in rGO Wrapped High Aspect Ratio 1D SbSe Nano Structure Renders Better Electrochemical Na+ Battery Performance

We chose to understand the cyclic instability and rate instability issues in the promising class of Na⁺ conversion and alloying anodes with Sb₂Se₃ as a typical example. We employ a synthetic strategy that ensures efficient rGO (reduced graphene oxide) wrapping over Sb₂Se₃ material. By utilization of the minimum weight of additive (5 wt.% of rGO), we achieved a commendable performance with a reversible capacity of 550 mAh g⁻¹ at a specific current of 100 mA g⁻¹ and an impressive rate performance with 100 % capacity retention after high current cycling involving a 2 Ag⁻¹ intermediate current step. The electrochemical galvanostatic intermittent titration technique (GITT) has been employed for the first time to draw a rationale between the enhanced performance and the increased mobility in the rGO wrapped composite (Sb₂Se₃-rGO) compared to bare Sb₂Se₃. GITT analysis reveals higher Na⁺ diffusion coefficients (approx. 30 fold higher) in the case of Sb₂Se₃-rGO as compared to bare Sb₂Se₃ throughout the operating voltage window. For Sb₂Se₃-rGO the diffusion coefficients in the range of 8.0×10⁻¹⁵ cm² s⁻¹ to 2.2×10⁻¹² cm² s⁻¹ were observed, while in case of bare Sb₂Se₃ the diffusion coefficients in the range of 1.6×10⁻¹⁵ cm² s⁻¹ to 9.4×10⁻¹⁵ cm² s⁻¹ were observed.     

Self-Assembly of DNA and RNA Building Blocks Explored by Nitrogen-14 NMR Crystallography: Structure and Dynamics

The isotopic enrichment of nucleic acids with nitrogen-15 is often carried out by solid-phase synthesis of oligonucleotides using phosphoramidite precursors that are synthetically demanding and expensive. These synthetic challenges, combined with the overlap of chemical shifts, explain the lag of nitrogen-15 NMR studies of nucleic acids behind those of proteins. For the structural characterization of DNA and RNA-related systems, new NMR methods that exploit the naturally occurring 99.9 % abundant nitrogen-14 isotope are therefore highly desirable. In this study, we have investigated nitrogen-14 spectra of self-assembled quartets based on the nucleobase guanine in the solid state by means of magic-angle spinning NMR spectroscopy. The network of dipolar proton–nitrogen couplings between neighboring stacked purine units is probed by 2D spectra based on ¹H→¹⁴N→¹H double cross-polarization. Interplane dipolar contacts are identified between the stacked G quartets. The assignment is supported by density functional theory (DFT) calculations of the anisotropic chemical shifts and quadrupolar parameters. The experimental spectra are fully consistent with internuclear distances obtained in silico. Averaging of chemical shifts due to internal motions can be interpreted by semiempirical calculations. This method can easily be extended to synthetic G quartets based on nucleobase or nucleoside analogs and potentially to oligonucleotides.     

有机单晶场效应晶体管

有机单晶场效应晶体管的研究对于探索电子的本质特性具有十分重要的意义。近几年来,不管是在制备技术还是在器件性能的研究方面,有机单晶场效应晶体管均取得了很大的进步,并由此引起了社会的广泛关注,成为场效应晶体管领域的一个重要研究方向。本文主要介绍了有机单晶的生长方法、有机场效应器件的各种制备技术、器件的迁移率及其影响因素,并对有机单晶场效应晶体管的发展前景和面临的一些问题作了简要的讨论。     

漂移管工作温度对离子迁移率谱的影响

离子迁移率、反应物离子的种类和产量与漂移管工作温度有很大的关系。本研究在不同温度下进行了离子迁移率实验,结果表明,离子迁移率随温度的升高而增大,而提高工作温度可以减少水分子对产物离子的影响,有利于改善系统检测的分辨率;选择合适漂移管工作温度,能有效地增加反应物离子的产量,从而提高系统检测的灵敏度和选择性。     

壳聚糖溶液pH对载细胞海藻酸钠-壳聚糖微胶囊性能的影响

以激光共聚焦扫描显微镜为研究手段, 原位直观地考察了在不同pH条件下聚电解质膜的络合程度和蛋白扩散情况. 通过分析pH值对微胶囊膜性能的影响规律, 并结合不同种类细胞对环境pH的敏感特性, 确定了制备细胞培养用海藻酸钠-壳聚糖微胶囊的最佳pH值. 结果表明, 当壳聚糖溶液的pH值由3.50增加到6.50, 微胶囊膜的络合深度呈现高-低-高的趋势, 而微胶囊膜的膨胀性能呈现低-高-低的趋势, 模型蛋白通过微囊膜的扩散呈现低-高-低的趋势, 拐点均出现在pH=4.00和5.50处. 结合动物细胞及微生物细胞对环境pH耐受能力的考察, 确定制备微囊化动物细胞时, 微胶囊成膜反应溶液的最佳pH值为5.50; 制备微囊化大肠杆菌时, 反应溶液的最佳pH值为5.00; 制备微囊化酵母菌时, 反应溶液的最佳pH值为4.50.     

Co@SiO2核壳式纳米粒子的合成、性质表征及在细胞分离和细胞芯片上的应用

合成了Co@SiO2核壳式纳米粒子, 并采用透射电镜(TEM)、 X射线衍射(XRD)、扫描电镜(SEM)和振动样品磁强计(VSM)对其形状、尺寸、荧光及磁特性进行了表征, 探讨了其在细胞分离和细胞芯片上的应用和原理.     

A review of mobility metrics for next generation vehicle mobility models

In the United States, the NATO Reference Mobility Model (NRMM) has been used for evaluating military ground vehicle mobility and the Vehicle Cone Index (VCI) has been selected as a mobility metric. VCI represents the minimum soil strength required for a vehicle to consistently make a specific number of passes, usually one or fifty passes. In the United Kingdom, the Mean Maximum Pressure (MMP) has been adopted as a metric for assessing military vehicle cross-country mobility. MMP is the mean value of the maxima occurring under all the wheel stations of a vehicle. Both VCI and MMP are empirically based. This paper presents a review of the basis upon which VCI and MMP were developed, as well as their applications to evaluating vehicle mobility in practice. With the progress in terramechanics and in modelling and simulation techniques in recent years, there is a growing desire to develop physics-based mobility metrics for next generation vehicle mobility models. Based on the review, criteria for selecting physics-based mobility metrics are proposed. Following these criteria, metrics for characterizing military vehicle traction limits and traversability on a given operating area are recommended.     

基于拉曼热测量技术的铜基复合物法兰GaN基晶体管的热阻分析

采用拉曼热测量技术结合有限元热仿真模型,分析比较新型铜/石墨复合物法兰封装与传统铜钼法兰封装的GaN器件的结温与热阻,发现前者的整体热阻比铜钼法兰器件的整体热阻低18.7%,器件内部各层材料的温度分布显示铜/石墨复合物法兰在器件中的热阻占比相比铜钼法兰在器件中的热阻占比低13%,这证明使用高热导率铜/石墨复合物法兰封装提高GaN器件热扩散性能的有效性.通过对两种GaN器件热阻占比的测量与分析,发现除了封装法兰以外,热阻占比最高的是GaN外延与衬底材料之间的界面热阻,降低界面热阻是进一步提高器件热性能的关键.同时,详细阐述了使用拉曼光热技术测量GaN器件结温和热阻的原理和过程,展示了拉曼光热技术作为一种GaN器件热特性表征方法的有效性.     

Effects of ultrasound on Microcystis aeruginosa cell destruction and release of intracellular organic matter

Harmful algal blooms negatively impact ecosystems and threaten drinking water sources. One potential method to effectively counteract algal blooms is ultrasonication. However, ultrasonication can easily lead to the release of intracellular organic matter (IOM). The purpose of this study was to investigate the relationship between the destruction of algal cells and IOM release at different ultrasound frequencies. Microcystis aeruginosa cells were ultrasonicated at 20 kHz with an intensity of 0.038 W/mL, 740 kHz with an intensity of 0.113 W/mL, and 1120 kHz with an intensity of 0.108 W/mL. The IOM release was detected by fluorescence spectroscopy in addition to the more commonly used haemocytometry and optical density. After ultrasonication for 15 min, the removal rate of algal cells reached 10.5% at 20 kHz, 9.46% at 740 kHz, and 35.4% at 1120 kHz. The 20 kHz and 740 kHz ultrasound caused local damage to algal cells and then disrupted them, whereas the 1120 kHz ultrasound directly disrupted most algal cells. The extracellular organic matter (EOM), which was increased by ultrasonication, mainly consisted of protein-like compounds, chlorophyll, and a small amount of humic-like substances. Gas vacuoles had been destructed before the cells were broken, as indicated by the decrease of cell size and the wrinkles on the cell surface. Moreover, the removal of algae cells while upholding integrity is more conducive to the safety of the water environment.