Gas Phase Catalysis by Metal Nanoparticles in Nanoporous Alumina Membranes

Nanoporous alumina membranes, loaded with palladium and ruthenium nanoparticles of various size, were used for gas phase hydrogenation of 1, 3‐butadiene and for oxidation of carbon monoxide, respectively. Those membranes contain 10⁹ ‐ 10¹¹ pores per cm², all running perpendicular to the surface. Membrane discs of 20 mm in diameter and only 60 μm thick, incorporated in a reactor in which the reactants can be pumped in a closed circuit through the pores, turned out to very actively catalyze hydrogenation of butadiene (Pd) and oxidation of CO (Ru). The activity of the Pd catalysts depends characteristically on the particles size, the gas flow, and of the educts ratio. As could be expected, larger particles are less active than smaller ones, whereas increasing gas flows in case of hydrogenation accelerates the reactions. Excessive hydrogen reduces selectivity with respect to the various butenes, but favours formation of butane.     

Photocatalytic Synthesis of Composite CdSe/CdS Nanoparticles

We have shown that CdSe/CdS nanocomposites can be obtained in a photocatalytic reaction with participation of CdS nanoparticles from sodium selenosulfate. We have studied the kinetic characteristics of this process in detail and have shown that its most likely mechanism includes a step involving reaction between SeSO^3/2− anions and electrons generated in the conduction band of the CdS nanoparticles during irradiation and stabilized in traps on the semiconductor surface.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 3, pp. 171–175, May–June, 2005.     

Analysis of thermal behaviour of high power semiconductor laser arrays by means of the finite element method (FEM)

New results of steady-state two-dimensional finite-element computations of temperature distributions of high power semiconductor laser arrays are presented. The influence of different thermal loads on the 2D temperature distribution in AlGaAs/GaAs gain-guided laser arrays is investigated. TheFEM model is tested by comparing it with analytical solutions. For numerical convenience, the latter is rewritten in a novel form, which is free of overflow problems. The maximum temperatures calculated by both methods agree within 1%. Several factors determining the thermal resistance of the device are quantitatively examined: the ratio of light emitting to non-emitting areas along the active zone, the amount of Joule losses, the current spreading, the solder thickness, and voids in the solder. This yields design rules for optimum thermal performance.     

Effect of WO3 particle size on the type and concentration of surface oxygen

1. Download : Download high-res image (65KB)
2. Download : Download full-size image

     

TiO2／Ti／TiO2半导体隔片光电化学电池的性能

研究了半导体隔片光电化学电池(SC-SEP)中光池溶液的pH、暗池溶液的氧化还原电对以及两池中的暗电极对电池的开路电压、光生电压、短路光电流和光伏安特性的影响。对它们的影响机制进行了初步分析。通过合理选择电池体系,SC-SEP的性能可比单隔室的光电化学电池(PEC)优越。     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

Plasmid DNA isolation using amino-silica coated magnetic nanoparticles (ASMNPs)

A simple and efficient approach for the rapid isolation of plasmid DNA from crude cell lysates has been described. The approach took advantage of the amino-modified silica coated magnetic nanoparticles (ASMNPs) with positive zeta potential at neutral pH and superparamagnetism under the external magnetic fields. As a demonstration, the pEGFP-N3 plasmid has been concentrated and isolated from the E. coli DH5α transformed with pEGFP-N3 plasmid through electrostatic binding between the positive charge of the amino group of ASMNPs and the negative charge of the phosphate groups of the plasmid DNA. Then the pEGFP-N3 plasmid has been released easily and quickly from the pEGFP-N3 plasmid-ASMNPs complexes with 3 M NaCl. The entire procedure could be carried out by the aid of external magnetic fields in 15 min and eliminate the need of phenol, cesium chloride gradients or other noxious reagents and complexes operation. Moreover, the pEGFP-N3 plasmid obtained by this approach retains biological activity that can be suitable for restriction enzyme digestion and cells transfection with expression of green fluorescence protein.     

可见光化的半导体光催化剂

光解水制氢能否实用化取决于太阳光的有效利用率, 研究开发可见光化的光催化剂成为当前光催化剂研究中的重要课题.本文介绍了利用 光解水制氢的反应机理,综述了近年来半导体光催化剂在利用可见光方面的研究进展,重点描述了这些光催化剂的结构,并对该领域今后的研究方向进行了展望.     

A method to construct polyelectrolyte multilayers film containing gold nanoparticles

Gold nanoparticles in polyelectrolyte multilayers film can be easily prepared by repeating immersion of a substrate in poly(diallyl dimethylammonium) chloride (PDDA)-AuCl₄⁻ complexes solution followed by reduction Au³⁺ through heating. UV-vis spectroscopy, cyclic voltammetry (CV) and tapping-mode atomic force microscopy (AFM) are used to confirm the successful construction of the polyelectrolyte multilayers film and the formation of gold nanoparticles. The multilayers film shows electrocatalytic activity to dioxygen reduction.     

纳米核壳式铜-锡双金属粉的制备及性能研究

A kind of novel core-shell Cu-Sn bimetallic nanoparticles has been prepared by a new method (displacement method), in which Sn was made to cover on the surface of Cu nano-core. The preparation method and reaction mechanism have been discussed. This reaction happened under the existence of coordinate agent-(NH₂)₂CS and protective agent PVP. The nanoparticles prepared were with a core-shell structure, granule diameter between 50～100 nm and good dispersing capability. The Cu-Sn nanoparticles proposed has better oxidation-resistant ability than Cu nanoparticles with corresponding granule diameter and can be applied as lubricant additives as well as antibacterial agent. When the additive amount is very low (0.1wt‰～0.5wt‰), it can improve the P_B of the lubricant by 92%～106%, and also enhance its antiwear characteristics and friction-reducing properties. At the concentration of 1 000 ppm, it can reach an antibacterial ratio of 99.99%.