新显色剂二溴硝基苯基重氮氨基偶氮苯的合成及与镉的显色反应的研究

作者合成了新显色剂2,6-二溴-4-硝基苯基重氮氨基偶氮苯(DBNDAA)。在pH8.5的硼砂-盐酸缓冲介质中,在Tween 80-SDBS存在下,该试剂与镉(Ⅱ)生成络合比为3:1的红色络合物,λ_(max)=500nm,ε_(500)=1.52×10~5L·mol~(-1)·cm~(-1)。镉量在0～28μg/25ml范围内遵守比耳定律。并测定了试剂的表观离解常数和络合物的表观不稳定常数。方法有良好的选择性。用该试剂测定了铝合金标样、环境水样及废水中的痕量镉,结果满意。     

Reaktionen vonN-Sulfinylverbindungen mit dem 1,2,4-Trithia-3,5-diborolan-Ringsystem und Substitutionsreaktionen am 1,2,4-Trithia-3,5-diborolan und 1,2-Dithia-4-aza-3,5-diborolidin

The reaction of trimethylsilyl- and pentafluorophenyl-N-sulfinylamine respectively with 3,5-dihalogeno-1,2,4-trithia-3,5-diborolanes yields the 1,2-dithia-4-aza-3,5-diborolidines1-3.Tert-butyl-N-sulfinylamine and 3,5-dimethyl-1,2,4-trithia-3,5-diborolane react analogous. OtherN-sulfinylamines however split the disulfane bridge in 3,5-dimethyl-1,2,4-trithia-3,5-diborolane and the 1,4-dithia-2-aza-3,5-diborolidines5A-7(A) are formed. Besides of boroxines, cyclo-2,4,6-trimethyl-1,3-dioxa-5-aza-2,4,6-triboranes and cyclo-2,4,6-trimethyl-1-oxa-3,5-diaza-2,4,6-triboranes are formed as byproducts,8–10 have been isolated. In 1,2,4-trithia-3,5-diborolanes and 1,2-dithia-4-aza-3,5-diborolidines the bromo-atoms can be substituted by alkyl (13, 14), by amino (15–20) and by isothiocyanato groups. The compounds were characterised analytically and spectroscopically (MS; NMR:¹H,¹¹B,¹⁹F,²⁹Si; IR).

     

含氮给体结构对丙烯腈电荷转移光聚合的影响

<正> 对于正性烯类单体,主要是乙烯基咔唑的电荷转移聚合,诚田已作过详细综述。负性烯类单体的电荷转移聚合主要研究的单体是丙烯腈(AN)及甲基丙烯酸甲酯(MMA)。Barton等研究了芳烃为引发剂的MMA光聚合。我们研究了芳胺为引发剂的光聚合。 芳胺,尤其是芳叔胺,是较强的电子给体,与负性单体在光照下经激基复合物而引发聚合,我们的实验表明,吡啶及其同系物(喹啉与吖啶)并不象吡咯及其同系物(吲哚与咔唑)那样有效地引发AN等负性单体的光聚合(见表1)。从图1所示的结构看,它们有     

The research on the high quality TiO2, MoO3-doped WO3 electrochromic film

The high quality TiO2, MoO3-doped WO3 electrochromic film was prepared by the sol–gel method for the first time. The sol, which has hydrogen peroxide (H2O2) and oxalic acid (H2C2O4), was very stable at room temperature and quite suitable for the deposition of films. The WO3 electrochromic film prepared from this doped sol had excellent performance, such as short response time, no cracks, good adhesion to the substrate, high coloring efficiency and longevity of service.     

超高效合相色谱法快速检测塑料食品接触材料中13种紫外吸收剂

建立了一种同时检测塑料食品接触材料中13种紫外吸收剂的超高效合相色谱法。以甲醇为溶剂对塑料食品接触材料样品进行超声提取，经C18固相萃取柱净化，过0.22 μm有机滤膜，采用超高效合相色谱仪分析。选择ACQUTY UPC² HSS C18 SB色谱柱（150 mm×3.0 mm，1.8 μm），以超临界二氧化碳为流动相，异丙醇为改性剂进行梯度洗脱，在最优色谱条件下，13种紫外吸收剂能够在4 min内实现有效分离。结果表明，在各自线性范围内，13种紫外吸收剂的线性关系良好，标准曲线相关系数不低于0.9985，检出限（S/N=3）为0.05~0.15 mg/kg，加标回收率为86.8%~115.7%，相对标准偏差为0.73%~5.61%。该方法快速简便，准确可靠，同时大大减少了有机溶剂的消耗，可用于塑料食品接触材料中13种紫外吸收剂的快速检测。     

Isolation of lappaconitine from Aconitum septentrionale roots by adsorption

Extracts of Aconitum septentrionale Koelle roots obtained using chloroform, isopropanol, and ethanol were purified using chloroform and basic γ-Al₂O₃. Ballast materials were selectively adsorbed by γ-Al₂O₃, increasing the mass fraction of lappaconitine in the extract. The ethanol extract was purified most. The degree of lappaconitine extraction by chloroform was unaffected by the presence of γ-Al₂O₃. However, the mass fraction in the extract and lappaconitine extraction from Aconitum septentrionale were increased more than twice. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 274–276, May–June, 2006.     

Interfacial tension and fluorine evolution on a carbon anode

During electrolysis of molten KF-2HF, strongly adherent fluorine bubbles are generated at the surface of carbon anode. The current was passing even if the horizontal anode was fully covered with gas film. The formation and growth of gas bubbles were studied by transient electrochemical techniques. It was observed that the fluorine bubbles do not have the spherical cap shape predicted by the classical theory. The curvature radius of the interface profile is not constant, the edge of the bubble being flat with a contact angle close to zero. The results are interpreted in the frame of a model which takes into account the predominant role of the interfacial properties.     

Development of rectangular column structured titanium oxide photocatalysts anchored on silica sheets by a wet process

Commercially available powdered photocatalysts such as P-25 are known to show high photocatalytic performance. However, in practical use, their anchoring onto a substrate without any binders is still very difficult. The purpose of this study is to design and develop high-performance photocatalysts that can be anchored onto a substrate, and to this end we have prepared a titanium oxide photocatalyst using a wet process. The results of this study led to the successful development of rectangular column structured titanium oxide crystals which could be anchored onto silica sheets. The rectangular columnar crystal was 100- 500 nm wide and 1000- 5000 nm long. Moreover, investigations on the complete oxidation reaction of acetaldehyde into CO₂ and H₂O showed a high performance equivalent to that of the most efficient marketed powdered photocatalysts.     

Chemiluminescence in O2 oxidation of organosodium compounds of polycyclic aromatic hydrocarbons and benzophenone

Chemiluminescence (CL) in oxidation of organosodium compounds by O₂ in THF was studied. Emitters of CL are excited complexes of polycyclic aromatic hydrocarbons, excimers¹(R·R)^*. The mechanism of their formation was proposed. The Na⁺, R^.−+O₂ CL system is a unique source for the selective generation of excimers of aromatic hydrocarbons. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 284–288, February, 1997.     

气相[（SiO2）nX]^—团簇产生机理

利用ＸｅＣｌ准分子激光烧蚀多种硅氧多孔结构材料，在负离子通道测得丰富的「（ＳｉＯ２）ｎＸ」＾－负离子团簇，并讨论了多孔网结构和表面活性基团的分布对激光能量的吸收，传输及团簇产生的重要作用。