Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.     

Synthesis of some sulfur-containing pyrido[1,2-α]pyrimidines

4-Methylthiopyrido[1,2-α]pyrimidin-2-one and 2-hydroxypyrido[1,2-α]pyrimidine-4-thione derivatives were synthesized by the addition ofN-(4-R-pyrid-2-yl)acetoacetamides (R = H, Me) to CS₂ under phase-transfer conditions followed by the alkylation of the reaction products with Mel. The molecular structure of 3-acetyl-4-methylthiopyrido[1,2-α]pyrimidin-2-one is established by X-ray analysis.     

Photochemical degradation of hyaluronic acid by singlet oxygen

Changes of the rheological properties of hyaluronic acid (sodium-magnesium salt) solutions after exposure to UV radiation indicate a vigorous decrease in their viscosity, but its still strong shear rate dependence. Whereas the presence of the singlet oxygen sensitizer (anthracene-1-sulphonic acid) brings about a loss of shear dependence; the studied solutions show newtonian behavior.     

An Efficient Method for the Synthesis of Acyl-diazenes Using NaNO_2/NaHSO_4·H_2O

Azo compounds are widely utilized as analytic reagents and dyes1, they can also be used in material of non-linear optics, material of optics information storing in laser disks, and dyes with oil solubility in photochromy in modern technology2. Recently, many noteworthy studies have shown that some azo compounds possess excellent optical memory and photoelectric properties3,4. For example, polymer scaffolds bearing azobenzene-potential are useful for optical information storage, azo-dye doped…     

Fractionation and purification of antioxidant peptides from Chinese sturgeon (Acipenser sinensis) protein hydrolysates prepared using papain and alcalase 2.4L

Protein hydrolysates have the potential to be natural and safer sources of bioactive peptides. In this study, two proteases were used to hydrolyze Chinese sturgeon (Acipenser sinensis) protein, and the hydrolysates were then purified to yield antioxidant peptides. The degree of hydrolysis of 23.56 % and 18.14 % was obtained using papain and alcalase 2.4L, respectivly, and hydrolysates had 96.80 % and 87.24 % total amino acid content, respectivly. The papain hydrolysate (PH) and alcalase 2.4L hydrolysate (AH) showed good antioxidant activity against DPPH^? (IC₅₀ of 3.64 and 3.15 mg/mL) and ABTS^?+ (IC₅₀ of 1.92 and 1.58 mg/mL), respectively. The low-molecular-weight (<1000 Da) fraction of both hydrolysates demonstrated the highest antiradical activity (IC₅₀ of 2.59 and 2.31 mg/mL, DPPH) and (IC₅₀ of 1.54 and 1.36 mg/mL, ABTS), respectively. Nine peptides were separated from both hydrolysates using reverse phase high performance liquid chromatography (RP-HPLC). The IC₅₀ for ABTS^?+ scavenging activity of peptide P5 with valine, glycine and asparagine (MW of 282.13 Da) from PH, and peptide P3 with histidine, glycine and alanine (MW of 302.74 Da) from AH was 0.89 and 0.72 mg/mL, respectively. The fractions and purified peptides obtained from Chinese sturgeon hydrolysates could be utilized as natural antioxidant substitutes in pharmaceuticals and food products.     

Wavelength-modulated,continuum-source excited atomic fluorescence spectrometric system for wear metals in jet engine lubricating oils using electrothermal atomization

A system for measuring atomic fluorescence of atoms produced via an electrically-heated graphite filament in a flame (acetylene/air or acetylene/nitrous oxide) and excited with a 300-W Eimac xenon are lamp is described. The experimental system also included wavelength modulation for background emission/fluorescence/scatter correction and an optically-triggered electronic integrator for efficient monitoring of the analyte fluorescence signal. Copper, aluminum and molybdenum were determined in jet engine lubricating oil samples (1 μl) with no pretreatment. The determinations are evaluated with respect to the accuracy and repeatability criteria of the U.S. Joint Oil Analysis Program.     

Thermal Decomposition of Bi(III), Cd(II), Pb(II) and Cu(II) Thiocyanates

Thermal decomposition of Bi(SCN)₃, Cd(SCN)₂, Pb(SCN)₂ and Cu(SCN)₂ has been studied. The thermal analysis curves and the diffraction patterns of the solid intermediate and final products of the pyrolysis are presented. The gaseous products of the decomposition (SO₂ and CO₂) were detected and quantitatively determined. Thermal, X-ray and chemical analyses have been used to establish the nature of the reactions occurring at each stage in the decomposition.This revised version was published online in November 2005 with corrections to the Cover Date.     

2-Polyfluoroalkylchromones. 9. Synthesis and structures of 5-(2-hydroxyaryl)-7-polyfluoroalkyl-1,4,8-triazabicyclo[5.3.0]dec-4-enes

2-Polyfluoroalkylchromones reacted with diethylenetriamine at 20 °C to form the corresponding 1,4,8-triazabicyclo[5.3.0]dec-4-ene derivatives. The crystal structures of 5-(2-hydroxyphenyl)-7-trifluoromethyl-1,4,8-triazabicyclo[5.3.0]dec-4-ene and 1-(2-aminoethyl)-7-(2-hydroxy-5-methoxyphenyl)-5-(1,1,2,2-tetrafluoroethyl)-2,3-dihydro-1H-1,4-diazepine were established by X-ray diffraction analysis.