Refining adsorption parameters of n-butyl alcohol at the interface of mercury electrode with aqueous NaF and Na2SO4 solutions by correcting the adsorbate concentration

As an adjunct to the regression analysis of differential capacitance curves, which allows refining the adsorption parameters, a program, which takes into account possible errors in volume concentrations of organic substances, is developed. Using this procedure, the earlier data on the differential capacitance of a mercury electrode in aqueous solutions of normal butanol (1-BuOH) containing either 0.1 M NaF or 0.05 and 0.5 M Na₂SO₄ as the supporting electrolyte are analyzed. This allows obtaining the most accurate values of adsorption parameters for the systems mentioned above within the framework of the model of two parallel capacitors and the Frumkin isotherm. It is shown that, when a linear dependence of the intermolecular interaction parameter on the electrode potential is taken into account, the standard deviation of experimental capacitance values from those calculated using the mentioned model is 6.8–8.8%, which points to very high accuracy of this phenomenological model.     

Effects of type of adsorption isotherms on parallel diffusion of sulfonated dyes into porous cellulose membrane

Transport phenomenon of three sulfonated azo dyes, C.I. Acid Red 88, C.I. Direct Yellow 12, and C.I. Direct Blue 15 into water-swollen cellulose membranes has been analyzed on the basis of parallel transport theory by surface and pore diffusion. Langmuir equation was applied into the mass balance equation to estimate dye concentration in the pores. The results were compared with the results obtained by applying Freundlich equation in our previous papers. The surface diffusivity (D _s) and the pore diffusivity (D _p) for the parallel diffusion model obtained by applying Langmuir equation agreed with those obtained by applying Freudlich equation. The theoretical concentration profiles for parallel diffusion calculated usingD _s andD _p coincided accurately with the experimental data when we applied either Langmuir or Freundlich equations.     

Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

气固吸附等温线的研究进展

综述了近些年来在气固吸附理论研究领域对吸附等温线的研究进展。论述了从早期的BDDT的5种类型吸附等温线，到IUPAC的6种类型吸附等温线，再到基于Ono-kondo晶格模型的Gibbs吸附分类的5种类型吸附等温线．讨论了与各种类型吸附等温线类型相对应的吸附机理，并对滞留回环现象进行了解释和分析。     

几种非金属矿物对硫化氢吸附性能的研究

某些非金属矿物具有吸附性[1 5]。本文测试了硅藻土、浮岩、沸石和麦饭石等非金属矿物的主要理化性能,研究了上述矿物在不同条件下对硫化氢的吸附性能,探讨了吸附剂粒度、用量、吸附时间和温度对吸附率的影响及吸附机理。在适当的条件下,各种材料对硫化氢的吸附率均能达到90%;吸附能力依次为硅藻土>麦饭石>沸石>浮岩。1　实验部分1 1　材料和试剂采集原矿标本硅藻土(抚松露水河)、浮岩(长白山天池)、麦饭石(长白山遥林)、斜发沸石(长春市净月潭),经粗选、粉碎、制备成不同粒径的吸附剂。X荧光光谱仪(PW140/10型,荷兰)和等离子直读光谱…     

超高交联吸附树脂吸附对硝基苯乙酮的热力学研究

比较两种超高交联聚苯乙烯吸附树脂NJ-8、AM-1与Amberlite XAD-4(以下简称XAD-4)对对硝基苯乙酮的静态吸附行为，根据吸附等温线研究了吸附热力学性质．在298～318K和研究的浓度范围内，NJ-8，AM-1、XAD-4对对硝基苯乙酮的吸附平衡数据符合Freundlich吸附等温方程．结果表明：吸附为放热过程，适当降低温度有利于吸附．计算了对硝基苯乙酮在NJ-8，AM-1、XAD-4树脂上的吸附焓变、自由能变，吸附熵变．对吸附行为作了合理的解释。     

Enhancing the enzymatic hydrolysis of cellulosic materials using simultaneous ball milling

One of the limiting factors restricting the effective and efficient bioconversion of softwood-derived lignocellulosic residues is the recalcitrance of the substrate following pretreatment. Consequently, the ensuing enzymatic process requires relatively high enzyme loadings to produce monomeric carbohydrates that are readily fermentable by ethanologenic microorganisms. In an attempt to circumvent the need for larger enzyme loadings, a simultaneous physical and enzymatic hydrolysis treatment was evaluated. A ball-mill reactor was used as the digestion vessel, and the extent and rate of hydrolysis were monitored. Concurrently, enzyme adsorption profiles and the rate of conversion during the course of hydrolysis were monitored. α-Cellulose, employed as a model substrate, and SO₂-impregnated steam-exploded Douglas-fir wood chips were assessed as the cellulosic substrates. The softwood-derived substrate was further posttreated with water and hot alkaline hydrogen peroxide to remove >90% of the original lignin. Experiments at different reaction conditions were evaluated, including substrate concentration, enzyme loading, reaction volumes, and number of ball beads employed during mechanical milling. It was apparent that the best conditions for the enzymatic hydrolysis of α-cellulose were attained using a higher number of beads, while the presence of air-liquid interface did not seem to affect the rate of saccharification. Similarly, when employing the lignocellulosic substrate, up to 100% hydrolysis could be achieved with a minimum enzyme loading (10 filter paper units/g of cellulose), at lower substrate concentrations and with a greater number of reaction beads during milling. It was apparent that the combined strategy of simultaneous ball milling and enzymatic hydrolysis could improve the rate of saccharification and/or reduce the enzyme loading required to attain total hydrolysis of the carbohydrate moieties.     

Stainless steel modified with poly(ethylene glycol) can prevent protein adsorption but not bacterial adhesion

The surface of AISI 316 grade stainless steel (SS) was modified with a layer of poly(ethylene glycol) (PEG) (molecular weight 5000) with the aim of preventing protein adsorption and bacterial adhesion. Model SS substrates were first modified to introduce a very high density of reactive amine groups by the adsorption of branched poly(ethylenimine) (PEI) from water. Methoxy-terminated aldehyde-poly(ethylene glycol) (M-PEG-CHO) was then grafted onto the PEI layers using reductive amination at the lower critical solution temperature (LCST) of the PEG in order to optimize the graft density of the linear PEG chains. The chemical composition and uniformity of the surfaces were determined using X-ray photoelectron spectroscopy (XPS) and time-of-flight static secondary ion mass spectrometry (ToF-SSIMS) in the imaging mode. The effects of PEI concentration and different substrate pre-cleaning methods on the structure and stability of the final PEG layer was examined. Piranha solution proved to be the most effective method for removing adventitious hydrocarbon contamination, compared to cleaning with ultrasonication in organic solvents, and was the SS substrate that produced the most stable and thickest PEI layer. The surface density of PEI was shown to increase with increasing PEI concentration (up to 30 mg/ml), as determined from XPS measurements, and subsequently produced the PEG layer with the highest density of attached chains. In model experiments using β-lactoglobulin no protein adsorption was detected on the optimized PEG surface as determined by XPS and ToF-SSIMS analysis. However, neither the adhesion of a Gram-negative (Pseudomonas sp.) nor a Gram-positive (Listeria monocytogenes) bacterium was affected by the coating as equal numbers adhered to all surfaces tested. Our results show that preventing protein adsorption is not a prerequisite stopping bacterial adhesion, and that other mechanisms most likely play a role.     

Structural and Adsorptive Characteristics of Pyrocarbon/Silica Gel Si-60

Pyrocarbon/silica gel adsorbents (carbosils, CS) with mesoporous Si-60 (Merck, granule size 0.2–0.5 mm) modified by pyrolysis of CH₂Cl₂ at 823 K and reaction time from 0.5 to 6 h and then hydrothermally treated at 473 K for 6 h were studied by means of TEM, adsorption and ¹H NMR methods. Changes in the structural and adsorptive characteristics of hybrid adsorbents before and after hydrothermal treatment, which depend on pyrocarbon content (C _C), were analyzed on the basis of TEM micrographs and p-nitrophenol and nitrogen adsorption isotherms treated using a constrained regularization method. Interfacial water layers in aqueous suspension of CS were investigated by means of ¹H NMR with freezing-out of bulk water at T < 273 K showing nonlinear changes in the Gibbs free energy of interfacial water with increasing C _C because of nonlinear dependence of the structural characteristics of pyrocarbon deposits and CS as a whole on C _C.     

Dissociation equilibrium between uncharged and charged local anesthetic lidocaine in a surface-adsorbed film

The dissociation equilibrium between uncharged local anesthetic lidocaine (LC) and charged local anesthetic LC (LCH⁺) in a surface-adsorbed film was investigated by measuring the surface tension and pH of aqueous solutions of a mixture of hydrochloric acid and LC. The surface tension values decreased slightly with increasing total molality m_t at 0X₂0.5, where X₂ is the mole fraction of LC in the mixture, while they decreased rapidly with increasing m_t at 0.5<X₂1. It was shown from the pH measurements that almost all LC molecules were changed into LCH⁺ ions by protonation at 0X₂0.5 and both forms coexisted only at 0.5<X₂1. The quantities of the respective LC and LCH⁺ transferred from the aqueous solution to the adsorbed film, i.e., their surface densities, were calculated by applying the thermodynamic equations derived to the surface tension and pH data. A greater quantity of LC than LCH⁺ existed in the adsorbed film at the coexisting composition. The partitioning behavior of LC and LCH⁺ in the adsorbed film was characterized by three composition regions: (1) slight partitioning of low surface-active LCH⁺ in the region at 0X₂0.5, (2) preferential partitioning of LC at 0.5<X₂<around 0.7, and (3) negative partitioning of LCH⁺ at around 0.7X₂1. The present results clearly indicate that uncharged local anesthetics transfer into hydrophobic environments such as cell membranes more than charged ones.