Application of a chemical equilibrium model to thermodynamic functions of transfer of alcohols from water to aqueous surfactants

In ternary aqueous solutions, hydrophobic solutes such as alcohols tend to aggregate with surfactants to form mixed micelles. These systems can be studied by meas of the functions of transfer of hydrophobic solutes from water to aqueous solutions of surfactant. These thermodynamic functions often go through extrema in the critical micellar concentration (CMC) region of the surfactant. A simple model based on interactions between surfactant and hydrophobic solute monomers, on the distribution of the hydrophobic solute between water and the micelles and on the shift in the CMC induced by the hydrophobic solute, can simulate the magnitude and trends of the transfer functions using parameters which are mostly derived from the binary systems. In order to check the model more quantitatively, volumes and heat capacities of transfer of alcohols from water to aqueous solutions of a nonionic surfactant, octyldimethylamine oxide, were measured. A quantitative agreement was achieved with three adjustable parameters. Good fits are also obtained for the transfers to the ionic surfactants, octylamine hydrobromide and sodium dodecylsulfate. When the equilibrium displacement contribution is small, the distribution constants and the partial molar properties of the alcohols in the micellar phase agree well with the parameters obtained with similar models.     

Fluorescent probes for detection of amphiphilic polymer hydrophobic microdomains: A comparative study between pyrene and molecular rotors

 Cationic amphiphilic polymers (e.g. polyvinylpyridinium bromides and polyvinylimidazo-lium bromides) adopt a compact coiled form in aqueous solutions. In the case of former polymers, the resulting hydrophobic microdomains are evidenced only by fluorescence spectroscopy if a molecular rotor (DMAC) is used as a fluorescent probe, while the behaviour of the latter can be studied in aqueous solution by using both types of fluorescent probes, i.e., pyrene and the molecular rotor. The purpose of the present investigation deals with a comparative study between the magnitude of the local viscosity and the polarity of the hydrophobic microdomains generated by poly(3-hexadecyl-1-vinylimidazolium bromide) in an aqueous medium using pyrene and DMAC as fluorescent probes. Moreover, the results are compared with the data obtained with micelles of conventional surfactants such as the homopolymer repetitive unit model and CTAB. Received: 3 June 1996 Accepted: 29 September 1996     

阳离子聚合合成聚苯乙烯大分子单体

<正> 近十年来,对大分子单体的合成和表征进行了较广泛的研究,其中尤以聚苯乙烯大分子单体研究得更多。Milkovich等用阴离子聚合合成了一系列具有不同端基的大分子单体。本文采用实验要求比阴离子简单的阳离子聚合方法,用对-氯甲基-β-溴乙苯和三     

Redox polymerization of 2-hydroxyethyl methacrylate (HEMA). I. Influence of surfactants on polymerization kinetics

Oxidation of ferrous orthophenanthroline (FeP) by peroxydiphosphate (PP) in aqueous medium at pH 1 was followed spectrophotometrically. Kinetic analysis has shown that oxidation occurs via the formation of an intermediate complex between FeP and PP. Equi-librium and rate constants were calculated. Influence of surfactants on the oxidation of FeP by PP was also Investigated. The equilibrium constant for complex formation was found to be higher in the presence of surfactants. The enhanced complex formation has been attributed to the ionic interactions between the charged surfactant and the ionic species in the reaction medium. Polymerization of HEMA initiated by the redox system,FeP/PP, was carried out in aqueous medium, under the conditions of excess reductant over oxidant and excess oxidant over reductant. The polymerization followed different mech-anisms under these conditions; with excess oxidant, the growing polymer radicals underwent oxidative termination, while with excess reductant, primary radical termination was pre-ferred. The effect of surfactants on the aqueous polymerization of HEMA using the redox system FeP/PP was also investigated. In addition to the decrease in rate, the polymerization followed a different mechanism in the presence of surfactants, the growing radicals ter-minated by mutual interaction. © 1995 John Wiley & Sons, Inc.     

Enantioselective separation in capillary electrophoresis using a novel mono-6-propylammonium-β-cyclodextrin as chiral selector

The chiral resolving ability of a novel single-isomer cationic β-cyclodextrin (CD), mono-6^A-propylammonium-6^A-deoxy-β-cyclodextrin chloride (PrAMCD), as a chiral selector in capillary electrophoresis (CE) is reported in this work for the enantioseparation of hydroxy, carboxylic acids and amphoteric analytes. The effect of chiral selector concentration on the resolution was studied. Good resolutions were achieved for hydroxy acids. Optimum resolutions were obtained even at 3.5 mM CD concentration for carboxylic acids. The electrophoretic method showed good linearity and reproducibility in terms of migration times and peak areas, which should make it suitable for routine analysis. In addition, baseline chiral separation of a six-acid mixture was achieved within 20 min. PrAMCD proved to be an effective chiral selector for acidic analytes.     

Permselective and Preconcentration Properties of a Surfactant‐Intercalated Clay Modified Electrode

This work is focused on the voltammetric examination of the ion exchange properties of a smectite type clay, before and after its modification by the replacement of its native interlamellar cations (Na⁺, K⁺, Ca²⁺) by hexadecyltrimethylammonium cations (HDTMA⁺). The raw clay and its organically modified form were first characterized by X‐ray diffraction (XRD) and N₂ adsorption–desorption isotherms (BET method) that confirmed the modification via an intercalation process. These materials were subsequently coated onto glassy carbon surfaces, and the resulting modified electrodes were evaluated for the uptake of [Ru(NH₃)₆]³⁺ and [Fe(CN)₆]^3? ions used as redox probes. Some experimental parameters affecting the incorporation of the probes within the film, including the ionic strength, the surfactant loading and the solution pH are thoroughly examined, in order to highlight the mechanism of the process. The possibility of using the surfactant‐intercalated clay modified electrode as an electrochemical sensor for [Fe(CN)₆]^3? is also evaluated.     

Intercalation and exchange reactions of clay minerals and non-clay layer compounds

Presently, a large variety of layered materials are synthesized that are able to intercalate neutral guest molecules or to exchange inorganic and organic ions for interlayer ions. Several of these materials are also found as minerals.The intracrystalline reactivity of a few selected compounds will be described and compared to clay minerals:

A proton NMR study on aggregation of cationic surfactants in water: effects of the structure of the headgroup

 ¹H NMR chemical shifts of solutions of the following cationic surfactants in D₂O were determined as a function of their concentrations: cetyltrimethylammonium chloride, CTACl, a 1 : 1 molar mixture of CTACl and toluene, cetylpyridinium chloride, CPyCl, cetyldimethylphenylam-monium chloride, CDPhACl, cetyldimethylbenzylammonium chloride, CDBzACl, cetyldimethyl-2-phenylethylammonium chloride, CDPhEtACl, and cetyldimethyl-3-phenylpropylammonium chloride, CDPhPrACl. Plots of observed chemical shifts versus [surfactant] are sigmoidal, and were fitted to a model based on the mass-action law. Satisfactory fitting was obtained for the discrete protons of all surfactants. From these fits, we calculated the equilibrium constant for micelle formation, K, the critical micelle concentration, CMC and the chemical shifts of the monomer, δ_mon and the micelle δ_mic. ¹H NMR-based CMC values are in excellent agreement with those which we determined by surface tension measurements of surfactant solutions in H₂O, allowing for the difference in structure between D₂O and H₂O. Values of K increase as a function of increasing the size of the hydrophilic group, but the free energy of transfer per CH₂ group of the phenylalkyl moiety from bulk water to the micellar interface is approximately constant, 1.9±0.1 kJ mol^-1. Values of (δ_mic–δ_mon) for the surfactant groups at the interface, e.g., CH₃–(CH₂)₁₅–N+(CH₃)₂ and within the micellar core, e.g., CH₃–(CH₂)₁₅–N⁺ were used to probe the (average) conformation of the phenyl group in the interfacial region. The picture that emerges is that the aromatic ring is perpendicular to the interface in CDPhACl and is more or less parallel to it in CDBzACl, CDPhEtACl, and CDPhPrACl. Received: 23 February 1996 Accepted: 29 August 1996     

Cationic polymerization of dienes VII. New electron donors in the polymerization of 1,3-pentadiene initiated by aluminum trichloride in non-polar solvent

The aim of this research was to investigate new bulky electron donors (EDs) generating hindered active species in the cationic polymerization of 1,3-pentadiene initiated by AlCl₃ in pentane, in order to avoid or strongly reduce the reaction between the active species and the double bonds of the polymer which are responsible for side reactions. At room temperature, the polymerization in the presence of new ED, such as OPh₂, N(PhBr)₃, NPh₃ and SPh₂, allowed to obtain higher conversions and lower insoluble fractions than without electron donor. The formation of a complex ED/AlCl₃ was shown for each electron donor. However, in the case of NPh₃ and SPh₂, variations of the polymer microstructure demonstrated an interaction between active species and these EDs. Similar results were obtained at lower temperature (−10 °C). The beneficial effect of the presence of electron donors such as NPh₃ and SPh₂ demonstrated the validity of the concept of sterically hindered active species, but the polymerization was still uncontrolled.