Template functions of particle monolayers on hydrophobic solid substrates

The template function of cationic particle monolayers bearing quaternary ammonium groups on their surfaces towards anionic colloids was investigated in this paper. Monodispersed cationic polymer particles having quaternary ammonium groups were self-organized on octadecylated glass plates through hydrophobic interaction. The morphology of the resulting particle monolayers was changed by tuning hydrophilic–hydrophobic balance of particles to fabricate aggregated type and dispersed type of particle monolayers. Gold and silver colloids were selectively deposited onto the particle monolayers through electrostatic interaction. The deposited gold and silver colloids on particle monolayers showed plasmon absorbance. Fluorescent silica colloids were also selectively deposited on particle monolayers to permit fluorescence labeling of the particle monolayers. Cationic particle monolayers fabricated on hydrophobic solid octadecylated were found to effectively work as templates for the deposition of above mentioned inorganic colloids.     

Surface forces in wetting films

A short review of various components of surface forces acting in a non-symmetrical system such as wetting films is presented here. Experimental results are compared with modified DLVO theory, which includes, besides dispersion and electrostatic, structural (solvation) forces caused by a change in liquid structure in conditions of confined geometry. The peculiarities of disjoining pressure isotherms and conditions of the film stability of non-polar and polar simple liquids, as well as of aqueous solutions of electrolytes and surfactants, are systematically considered from a historical perspective.     

Sodium “stuffed” Ba2−xSrxFe4O8 ferrites: new cationic conductors

Sodium insertion in the tetrahedral layer structure of the ferrites Ba_2−xSr_xFe₄O₈ was performed by solid state reaction at 1220 K in air. Superstoichiometric oxides with the actual formula (Ba_2−xSr_x)_1−y/4Na_yFe₄O₈—y0.56; 0.60Ba/Sr1.67—were characterized by X-ray and neutron powder diffraction. The hexagonal unit-cell volume shows an increasing dependence on the sodium insertion when the Ba/Sr ratio reaches the largest values. The marked expansion of the c parameter is the likely signature of the location of the inserted sodium cations within the interlayer space. One-half of the sodium cations partly sits on the Sr(Ba) sites in octahedral coordination and the other half occupies extra octahedral and tetrahedral sites. ac conductivity measurements point to a cationic conductivity whose thermally activated regime—E_a 0.7 eV—evidenced from 570 K, is unsensitive to the sodium content. The bottleneck of the 2D sodium mobility regards the crossing of the oxygen triangular faces shared by the different polyhedra within the interlayer space.     

Effects of Nonionic and Mixed Cationic-Nonionic Micelles on the Rate of Alkaline Hydrolysis of 4-Nitrophthalimide

Pseudo-first-order rate constants (k_obs) for alkaline hydrolysis of 4-nitrophthalimide show a monotonic decrease with increase in [C₁₂E₂₃]_T (total concentration of Brij 35) at constant [CH₃CN] and [NaOH]. This micellar effect is explained in terms of a pseudophase micelle model. The rate of hydrolysis becomes too slow to monitor at [C₁₂E₂₃]_T≥0.03 M in the absence of cetyltrimethylammonium bromide (CTABr) and at [C₁₂E₂₃]_T≥0.04 M in the presence of 0.006–0.02 M CTABr at 0.01 M NaOH. The plots of k_obs versus [C₁₂E₂₃]_T show minima at 0.006 and 0.01 M CTABr, while such a minimum is not visible at 0.02 M CTABr.     

八甲基环四硅氧烷正离子细乳液开环聚合动力学

以十二烷基苯磺酸钠(SDBS)为乳化剂,硫酸或盐酸为催化剂,八甲基环四硅氧烷(D4)为单体,十六烷为共稳定剂,超声预乳化,制备了聚硅氧烷细乳液,研究了超声时间、催化剂用量、乳化剂用量和温度对聚合动力学的影响.结果表明,在一定酸度范围内,聚合速度与硫酸浓度0.81次方、与盐酸浓度1.02次方、与乳化剂浓度-0.66次方成正比,反应的表观活化能为40.56kJ/mol.     

Spreading of Oil Droplets Containing Surfactants and Pesticides on Water Surface Based on the Marangoni Effect

Oil droplets containing surfactants and pesticides are expected to spread on a water surface, under the Marangoni effect, depending on the surfactant. Pesticides are transported into water through this phenomenon. A high-speed video camera was used to measure the movement of Marangoni ridges. Gas chromatography with an electron capture detector was used to analyze the concentration of the pesticide in water at different times. Oil droplets containing the surfactant and pesticide spread quickly on the water surface by Marangoni flow, forming an oil film and promoting emulsification of the oil–water interface, which enabled even transport of the pesticide into water, where it was then absorbed by weeds. Surfactants can decrease the surface tension of the water subphase after deposition, thereby enhancing the Marangoni effect in pesticide-containing oil droplets. The time and labor required for applying pesticides in rice fields can be greatly reduced by using the Marangoni effect to transport pesticides to the target.     

Amphiphilic Graft Copolymers of Hydroxypropyl Cellulose Backbone with Nonpolar Polyisobutylene Branches

The novel amphiphilic graft copolymers with hydrophilic hard polar hydroxypropyl cellulose(HPC) backbone and hydrophobic soft nonpolar polyisobutylene(PIB) branches have been successfully synthesized through nucleophilic substitution reaction of living PIB chains carrying oxonium ions with the-OH groups along HPC backbone. The PIB branch length in the graft copolymers could be designed by living cationic polymerization and the grafting density could be adjusted by PIB~+/-OH molar ratio. The living PIB chains carrying oxonium ion were prepared by transformation of allyl bromide end groups in the presence of AgClO_4 and silver nanoparticles(3.2±0.3 nm, 0.7 wt%-1.8 wt%)generated in situ from AgBr. The phase-separation morphology was formed in the graft copolymers due to their incompatibility between backbone and branches. The hydrophilicity on the surface of graft copolymer films could be turned to hydrophobicity by increasing grafting density or/and length of PIB branches. The soft PIB segments in graft copolymers provided an unique surface via self-assembly for anti-protein adsorption against bovine serum albumin. A small amount of Ag nanoparticles in the copolymers contributed to good antibacterial activities against Staphylococcus aureus or Escherichia coli.     

Application of a chemical equilibrium model to thermodynamic functions of transfer of alcohols from water to aqueous surfactants

In ternary aqueous solutions, hydrophobic solutes such as alcohols tend to aggregate with surfactants to form mixed micelles. These systems can be studied by meas of the functions of transfer of hydrophobic solutes from water to aqueous solutions of surfactant. These thermodynamic functions often go through extrema in the critical micellar concentration (CMC) region of the surfactant. A simple model based on interactions between surfactant and hydrophobic solute monomers, on the distribution of the hydrophobic solute between water and the micelles and on the shift in the CMC induced by the hydrophobic solute, can simulate the magnitude and trends of the transfer functions using parameters which are mostly derived from the binary systems. In order to check the model more quantitatively, volumes and heat capacities of transfer of alcohols from water to aqueous solutions of a nonionic surfactant, octyldimethylamine oxide, were measured. A quantitative agreement was achieved with three adjustable parameters. Good fits are also obtained for the transfers to the ionic surfactants, octylamine hydrobromide and sodium dodecylsulfate. When the equilibrium displacement contribution is small, the distribution constants and the partial molar properties of the alcohols in the micellar phase agree well with the parameters obtained with similar models.     

The catanionic system dodecyltrimethylammonium hydroxide–n-dodecanephosphonic acid–water. Triangular phase diagram

 The triangular phase diagram of the system dodecyltri-methylammonium hydroxide (DTAOH)–dodecanephosphonic acid (H₂DP)–water was studied by several techniques. The DTAOH-rich zone could not be studied because DTAOH decomposed when it was dried. Pure H₂DP only forms lamellar mesophases with water. The inclusion of DTAOH in the system produces the appearance of cubic and hexagonal mesophases. The gradual increase in DTAOH proportion lead to the gradual reduction in the existence of the lamellar mesophase domain, and increase of the hexagonal liquid crystal domain. At high DTAOH content, the lamellar mesophase disappeared. This behavior was explained by the gradual destruction of the hydrogen-bonded structure in the polar headgroup layer of liquid crystal aggregates. H₂DP-rich anhydrous crystals were triclinic. Received: 8 September 1997 Accepted: 17 February 1998     

十二烷基伯胺盐酸盐与十二烷基聚氧乙烯硫酸钠复配体系中的表面性质

研究了十二烷基胺盐酸盐(DAC)和十二烷基聚氧乙烯硫酸钠(AES)复配体系的表面性质与胶束化行为.发现该体系在广泛的复配比例区间和温度区间内保持了极为优异的表面活性,测定了该体系的临界胶束浓度(cmc)与其对应的表面张力(γcmc)的具体值,并研究了温度、pH值和离子强度等环境因素对相关体系的影响.