Advantages to Conversion of Lattice Heat Capacity to Cv in the Resolution of Excess Properties The Ln2S3's as an example

This paper represents a fitting (modeling) of the temperature dependence of the Komada-Westrum characteristic temperature for those γ-, δ- and ε-phase lanthanide sesquisulfides for which the total heat capacities, including internal degrees of freedom (e.g., Schottky and magnetic contributions), were connected to the residue of only lattice vibrations yielding lattice heat-capacity contributions. These characteristic temperatures (θ_KW) at 298.15 K are seen to behave smoothly (nearly linearly) as a function of (cationic) atomic number within the region of stability of each phase as does the density. The trends between the phases also show some consistency but not predictability of one from the other. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mass distribution in a dynamic sample zone inside a flow injection manifold: modelling integrated conductimetric profiles

A mathematical model for fitting the experimental ICM (integrated conductimetric method) curves developed by the authors in a previous work, is presented for the first time in this study. The proposed model fits the experimental curves with great precision and allows to predict physical dispersion for single-line flow injection system. The correlation of the model’s parameters with typical reactionless FIA peak parameters is also assessed. The IDQ coefficient—a novel dispersion estimator previously reported by the authors—can also be predicted when operational FIA variables are changed. Experimental and modelled profiles are compared as a function of the system’s variables, showing an excellent agreement.     

Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

Cure kinetics of epoxy-amine resins used in the restoration of works of art from glass or ceramic

The cure kinetics of two epoxy/amine resins, Araldite 2020 and AY103-HY956 widely used as adhesives in the restoration of works of art from glass or ceramic was investigated using FTIR spectroscopy. These resins are two-part adhesives, consisting of a resin - A, based on a diglycidyl ether of bisphenol A, and a hardener - B which is either a cycloaliphatic amine (isophorone diamine) for Araldite 2020, or a mixture of three aliphatic amines in HY956. The study was based on the collection of IR spectra, in the middle range (4000-600 cm⁻¹), of mixtures of resin and hardener at different proportions and isothermal temperatures (22-70 °C) as a function of curing time. A kinetic model was employed to simulate the experimental data using two kinetic rate constants. Diffusion control was incorporated to describe the cure behaviour at high degrees of conversion. From fitting to experimental data the kinetic and diffusional parameters were estimated, together with the activation energies of the kinetic and autocatalytic rate constants. It was found that higher degrees of curing are obtained at higher temperatures and increased amounts of hardener. Differences in the performance of the two adhesives are explained based on the type of the amines used as hardener.     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

Thermal techniques to study complex elastomer/filler systems

The transfer of heat through an elastomeric matrix is important for both the processing of the material and its subsequent lifetime. Thermal conductivity can be used to evaluate the influence of different polymers and fillers on heat transfer. Additionally, the dispersion of the filler has an effect on heat transfer and thermal conductivity measurements can be used to provide semi-quantitative estimations of filler dispersion. The degradation of sulfur-crosslinked elastomer systems has been studied for many years. The degradation of the crosslinks (changes in sulfur rank) and degradation of the polymer backbone by thermal and/or oxidative processes have been studied extensively using many techniques including thermal analysis (references). However, the degradation of the crosslinked-polymer 'network' is less well understood. The relationship of the crosslink network to this degradation process is a key to both the long term and higher temperature performance of the sulfur-crosslinked elastomer. The changes in physical properties observed upon exposure of sulfur-crosslinked elastomers can be monitored using dynamic mechanical analysis. Subsequently, other thermal techniques can be used to monitor the chemistry that is occurring during these degradations. Thermal desorption/mass spectroscopy and dynamic scanning calorimetry are used to complete the picture of the degradation processes taking place. Examples of these techniques will be provided to illustrate the utility of the analytical approach, the chemistry involved in these degradation processes and the effect of changes in the polymer, cure package and other ingredients. This revised version was published online in August 2006 with corrections to the Cover Date.     

3，9－二羟乙基－3＇，9＇－二苯甲基－1，5，7，11－四氧杂螺环［5，5］十一烷的合成和聚合反应

从两二酸二乙酯、氯乙酸乙酯和氯苄出发，经ＬｉＡｌＨ４还原，合成新的二元醇，进而合成新的螺环化合物：３，９－二羟乙基－３＇，９＇－二苯甲基－１，５，７，１１－四氧杂螺［５，５］十一烷．该化合物的结构由它的氢和碳－１３核磁共振谱、红外光谱和元素分析得到证明．该单体在三氟化硼乙醚络合物的作用下进行开环聚合反应．由于环上四个取代基的稳定作用，聚合物的收率比较低（产率１０％左右）．通过对聚合物的结构分析，提出了这一单体的阳离子开环聚合反应机理．对随聚合温度升高，聚合物中酯基／苯基的克分子比降低，以及本体聚合时得到交联聚合物等一系列现象作了探讨．     

新的聚合物支载硼氢负离子还原剂系统研究 3: 聚合物支载还原剂III

硼氢化钠的低分子还原系统研究很多,但其聚合物支载还原剂相对来说就很少,而且仅以强碱型阴离子交换树脂来制备的聚合物试剂。为了寻找用途更广泛的、新的聚合物支载还原剂,我们进行了硼氢负离子的聚合物还原系统的研究;发现能用弱酸型阳离子交换树脂制备出新的聚合物支载还原剂。前文报道了用NaBH_4的水溶液和阴离子交换树脂     

离子交换-双氧水氧化法制备纳米CeO2晶体

以99.995% Ce(NO₃)₃和强碱性阴离子交换树脂为原料，采用离子交换-双氧水氧化法合成制备出纳米CeO₂晶体。并就离子交换反应中的Ce³⁺浓度、树脂加入速度和离子交换温度及H₂O₂加入速度等条件对CeO₂粒径的影响进行了探讨，得出了离子交换-双氧水氧化法制备纳米CeO₂晶体的最佳工艺条件。FTIR、TEM分析表明，离子交换法无需对合成的Ce(OH)₃溶胶进行洗涤即可去除NO₃^-、CO₃^2-等阴离子杂质，并用H₂O₂将该溶胶氧化，经真空干燥可制得粒径分布均匀，平均晶粒尺寸约3 nm，高纯度的CeO₂粉体。