三氟化硼引发四氢呋喃聚合的研究——Ⅳ.1,4-丁二醇的影响

前报中已证明用三氟化硼-环氧氯丙烷(ECH)引发四氢呋喃(THF)聚合具有较高的引发效率,并对在Ac_2O、水和无水存在下的聚合反应进行了研究。本文报道1,4-丁二醇(BG)对BF_3引发THF聚合反应的影响。通常认为在BG存在下,BF_3是不能引发THF聚合的,但本工作证明BG是有效的分子量调节剂,制备分子量在     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

Synthesis and thermal stability of the resins prepared from the reactions of 1,4-bis(2,2-dicyanovinyl)benzene with aromatic diamines and electrical conductivity of the resulting materials following pyrolysis

New thermosetting resins were prepared from the reaction of 1,4-bis(2,2-dicyanovinyl)benzene with aromatic diamines in varying molar ratios. The thermal stability of these resins was correlated with their composition and the curing conditions. They were stable in N₂ up to 370–448°C and afforded anaerobic char yields of 73–84% at 800°C after curing at 300°C for 20–60 h. The temperature dependence of the electrical resistivity of all resins pyrolyzed at 700°C for 15 h was studied in the temperature range from ?173–327°C (100–600 K). The results showed that at room temperature the unpyrolyzed polymers have insulating properties, whereas a dramatic decrease in the electrical resistivity is observed following pyrolysis. The temperature dependence of the electrical resistivity suggests that all of the materials studied have semiconducting properties. The observed electrical conductivity is thermally activated with activation energies ranging from 0.03–0.06 eV. © 1994 John Wiley & Sons, Inc.     

微波萃取花生壳天然黄色素及其稳定性研究

对福建产花生壳进行了微波萃取天然黄色素及其稳定性的研究 .研究表明微波萃取的工艺条件是 :以pH =3,体积分数 70 %的乙醇水溶液作提取剂 ,原料与提取剂配比为 1g∶5mL ,微波辐射功率为 12 0W ,辐射时间2 4 0s.对该色素稳定性研究结果表明 ,该色素为水溶性色素 ,属黄酮类色素 ,适用pH值范围比较宽 ,尤其碱性状态效果最佳 ,对光、热稳定性好 ,大多数食品添加剂对色素稳定性影响不大 ,对氧化剂H2 O2 的耐受能力较差 ,对还原剂Na2 SO3 的耐受能力强     

MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.     

CuO/γ-Al2O3单分散催化剂的XAFS研究

采用XAFS方法研究浸渍法制备并于低温焙烧的CuO/γ-Al2O3催化剂的局域结构.对于CuO负载量小于单层分散阈值的CuO/γ-Al2O3(0.4 mmol/100 m2),结果表明,CuO物种是以层状分散的孤立原子簇存在于γ-Al2O3载体表面,其第一近邻Cu－O配位环境的结构与晶态CuO的相似,键长和配位数分别为0.195 nm和4.对于CuO负载量等于单层分散阈值的CuO/γ-Al2O3(0.8 mmol/100 m2),已有少量的CuO纳米颗粒生成.对于CuO负载量大于单层分散阈值的CuO/γ-Al2O3(1.2 mmol/100 m2),其结构与多晶CuO的相近.基于CuO在γ-Al2O3载体上的三种不同分散状态的结构特点,我们提出了CuO/γ-Al2O3催化剂的结构模型.     

紫荆花红色素开发利用的研究

首次报道紫荆花红色素的提取纯化方法及红色素的理化性质，并与玫瑰茄红色素作对比研究，证实同属于花青甙类化合物，又经急性毒性试验证明其毒性极低，故紫荆花天然红色素具有开发利用的价值。     

控制异丁烯阳离子聚合终止方式的新方法—活性中心转化法

控制异丁烯阳离子聚合终止方式的新方法──活性中心转化法曹宪一，王强，武冠英（北京化工大学高分子材料研究所，北京，１０００２９）关键词异丁烯，阳离子聚合，活性中心转化自八十年代中期Ｈｉｇａｓｈｉｍｕｒａ及Ｋｅｎｎｅｄｙ等人陆续发现乙烯基醚类单体及异丁烯...     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.     

Application of matrix solid-phase dispersion in the analysis of priority polycyclic aromatic hydrocarbons in fish samples

The performance of matrix solid-phase dispersion (MSPD) for the extraction of polycyclic aromatic hydrocarbons (PAHs) in fish tissue is described. The suitability of different solid supports was tested as well as the influence on the extraction efficiency of the natural fat content in samples. Under optimal conditions 0.6-0.8 g of tissue sample, are dispersed with 2 g of octadecylsiloxane (C18) and 0.5 g of anhydrous sodium sulphate and transferred to the top of a polyethylene solid-phase extraction cartridge which already contains 2 g of florisil and 1 g of C18. Cartridges were eluted with acetonitrile. The analysis of the extracts was carried out by high-performance liquid chromatography (HPLC) coupled with fluorescence detection. The proposed method provides detection limits between 0.04 and 0.32 ng/g for the different considered PAHs, below the maximum levels established by the some regulatory bodies for the six PAHs after recent oil spill episodes and European Union regulations. Recoveries over 80% were obtained for all compounds. Accuracy validation was carried out using the US National Institute of Standards and Technology (NIST) SRM 2977 reference material.