The effects of solvation in the theoretical spectra of cationic dyes

We present a quantum-mechanical study on the solvent effects in the structure and electronic spectra of some cationic dyes: acridine orange, proflavine, safranine, neutral red, thionine and methylene blue. The geometry optimizations were carried out with the AM1 and DFT (with B3LYP functional) methods and the theoretical spectra of the dyes under study were obtained with Zindo time-dependent methods (TD–DFT and TD–HF). The solvation methodology adopted was the integral equation formulation (IEF) version of the polarizable continuum model (PCM).     

Complexation of an acrylic resin by tertiary amines: synthesis and characterisation of new binders for antifouling paints

Antifouling coatings are the most reliable way to prevent biofouling of immersed surfaces. As concerning the high toxicity of organotin paints, the tendency is the development of coatings, which do not present environmental risks. In this work, we prepare binders from modification of acrylic copolymers containing free carboxylic acid groups. Biocides chosen are tertiary ammonium salts; alkyl chain substituents with different length are considered. The chemical modifications of resins are carried out via a single step reaction. Modification extents are monitored through proton nuclear magnetic resonance and thermogravimetric analysis and the modified resins are characterised by Fourier transform infrared spectroscopy. The glass transition temperature of the acrylate systems is assessed by dynamical mechanical analysis (pin point method) and compared with data obtained by differential scanning calorimetry. The erosion and antifouling properties of the binders are followed during an exposure to marine environment by a visual observation.     

Increased oxygen transfer in a yeast fermentation using a microbubble dispersion

A microbubble dispersion (MBD) was used to supply oxygen for aerobic fermentations in a standard 2 L stirred tank fermenter. The microbubble dispersion was formed using only surfactants produced naturally. Growth rates ofSaccharomyces cerevisiae cultures were found to be equal or greater with MBD sparging than with gas sparging. The oxygen transfer coefficent with MBD sparging was found to be 190/h and independent of impeller speed from 100–580 rpm. The oxygen transfer coefficient with air sparging rose from 55 to 132/h over the same range of impeller speeds. Power requirements for the fermenter systems were estimated.     

NixB/沸石催化剂的分散性和反应性

用晶内形成法制备了Ni_xB/沸石催化剂,用饱和氢化学吸附法结合TEM方法考察了负载金属的分散性,并研究了其己环烷脱氢反应性。结果表明,Ni_xB/沸石样品上负载金属的分散性高,金属粒径分布也相对集中;金属负载量、载体结构和性质以及Ni_xB的制备条件对负载金属的分散性有明显影响。Ni_xB/沸石样品呈现较好的环己烷脱氢反应性。     

X-Ray Powder Diffraction Studies of Polyhydrates of Cross-Linked Tetraisoamylammonium Polyacrylates

X-ray powder diffraction studies were performed of the polyhydrates, formed at positive temperature in swelled grains of carboxylic cation-exchange resins in the form of tetraisoamylammonium (cross-linked tetraisoamylammonium polyacrylates, differing in the degree of cross-linking: 1, 2 and 3%). It was shown that the polyhydrates exist as the crystalline phase under specific conditions, determined earlier by DTA technique. Diffraction patterns of the samples, recorded at the temperature +3 ± 1 °C, indicate that the polyhydrates crystallize in hexagonal symmetry, the unit cell parameters are close to a=12.25 Å, c=12.72 Å and do not depend significantly upon the degree of cross-linking. The suppositions were made concerning the size of hydrate crystallites, formed in the swelled grains of the studied resins.This revised version was published online in July 2005 with a corrected issue number.     

Highly crosslinked micron-range polymer microspheres by dispersion polymerization of divinylbenzene

Narrow disperse microparticles are formed by dispersion polymerization of commercial divinylbenzene in acetonitrile or ethanol solution in the presence of 2,2′-azobis(2-methylpropionitrile) initiator and polyvinylpyrrolidone stabilizer. The particles have average diameters between 1 and 9 μm depending on monomer concentration, solvent, and temperature. While the smaller particles are relatively smooth, surface texture increases with diameter to give popcorn shapes at 9 μm diameter. High crosslinker concentration is shown to be essential for particle formation. © 1993 John Wiley & Sons, Inc.     

以硫醚为主链的螯合树脂研究Ⅳ．含硫代硫酸根、叠氮基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物分别与硫代硫酸钠，叠氮化钠反应，制得四种侧链带有硫代硫酸根或叠氮基的新型螯合树脂。它们对贵金属离子具有较高的吸附容量和较好的吸附选择性。     

Demonstration of methylene-ether bridge formation in melamine-formaldehyde resins

¹H and ¹³C NMR have been used for the quantitative determination of methylene-ether bridges in melamine-formaldehyde (MF) resins. The amount of methylene-ether bridges was determined by ¹³C NMR from the number of monomethylolated amino groups consumed in the condensation reactions and is in agreement with that calculated from the condensation water contents. This latter method, which involves a combination of ¹H and ¹³C NMR, is based on the amount of condensation water released during the formation of both methylene and methylene-ether bridges. © 1995 John Wiley & Sons, Inc.     

乙基苯乙烯与二乙烯苯球形共聚物吸附树脂作反相薄层色谱固定相

本文合成了乙基苯乙烯与二乙烯苯球形共聚物PED－9吸附树脂，粒径3～7μm，用作薄层色谱固定相，对板效进行了研究，并通过分离实例说明它对硝基苯酚及芳胺具有优良的分离性能。     

Preconcentration and Separation Procedures for the Spectrochemical Determination of Platinum and Palladium

Low concentrations of Pt and Pd in industrial (µgg^–1 level) and environmental samples (ngg^–1 level) together with the complexity of the matrix causing many interferences during the determination of noble metals often require elaboration and application of pre-concentration/matrix separation procedures before detection of the analyte. Different pre-concentration/matrix separation procedures applied prior to the determination of Pt and Pd by atomic spectrometric techniques are reviewed and critically compared taking into account potential interferences. The methods studied are divided into 5 groups including precipitation and coprecipitation, liquid–liquid extraction, solid phase extraction, electrochemical pre-concentration and biosorption. The main analytical problems occuring during sample preparation and storage are discussed.