ESR Studies on a Friedel‐Crafts Alkylation Reaction in [bmim]Cl‐AlCl3 Ionic Liquid

The paramagnetic complexes formed in Friedel‐Crafts alkylation reaction systems are invistigated by electron spin resonance (ESR) spectroscopy, in room temperature ionic liquids system 1‐butyl‐3‐methyl‐limidazolium chloride‐aluminium chloride ([bmim]Cl‐AlCl₃). The results indicate that ESR spectra observed are due to polycyclic aromatic radical cations formed from their parent hydrocarbons. ESR spectrum of spin adduct is obtained in an ionic liquid system composed of [bmim]Cl‐AlCl₃. In acidic solution the ¹⁴N hyperfine coupling constant of 4‐oxo‐TEMPO, 2.15 mT, is appreciably larger due to an adduct formed with AlCl₃.     

Silicon-29 NMR Study of Alkali-Exchanged NaY Zeolites

High-resolution solid-state ²⁹Si NMR has been applied to the study of partially exchanged Li, K, and Cs NaY zeolites. The order of the ²⁹Si chemical shifts of dehydrated samples is Li, Na-Y < Na-Y < K, Na-Y. The correlation between the ²⁹Si chemical shift and the Li or K loading on Li, Na-Y or K, Na-Y was rationalized in terms of the interaction between the framework and the cations inside the small cages. Because of the restrictive migration of large Cs⁺ ions from the supercages to the small cages, the ²⁹Si chemical shift of Cs, Na-Y was found to be similar to that of Na-Y.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Synthese,Kristallstruktur und festkörper‐NMR‐spektroskopische Untersuchung neuer Oxonitridosilicate der Mischkristallreihe Ba4−xCaxSi6N10O

The new oxonitridosilicates Ba_4?xCa_xSi₆N₁₀O have been synthesized by means of high‐temperature synthesis in a radio‐frequency furnace, starting from calcium, barium, silicon diimide and amorphous silicon dioxide. The maximum reaction temperature was at about 1450 °C. The solid solution series Ba_4?xCa_xSi₆N₁₀O with a phase width 1.81 ≤ x ≤ 2.95 was obtained. The crystal structure of Ba_1.8Ca_2.2Si₆N₁₀O was determined by X‐ray single‐crystal structure determination (P2₁3, no. 198), a = 1040.2(1) pm, Z = 4, wR2 = 0.082). It can be described as a highly condensed network of corner‐sharing SiN₄ and SiON₃ tetrahedra, the voids of which are occupied by the alkaline earth ions. The structure is isotypic with that of BaEu(Ba_0.5Eu_0.5)YbSi₆N₁₁. In the ²⁹Si solid‐state MAS‐NMR spectrum two isotropic resonances at ?50.0 and ?53.6 ppm were observed.     

Real-time sensing and three-dimensional display of far outdoor scenes based on asymmetric integral imaging

A new asymmetric integral imaging (AII) system for real-time pickup and three-dimensional (3-D) display of far outdoor scenes based on dynamic-pixel-mapping (DPM) is proposed. DPM is a digital process to transform the elemental images captured with a lens array into the perspective-variant object images (POIs) whose structures are matched with those of display lenses, where the orders of pixels in each POI are reversely mapped, and then capture a set of virtual elemental images (EIs) at the specific depth planes from the back-propagated POIs. This DPM enables an asymmetrical use of pickup and display lens arrays, allowing the long-ranged pickup of far outdoor scenes and their resolution-enhanced 3-D reconstruction. Experiments with a pair of pickup and display lens arrays whose pitches and focal lengths are given by 7.5 mm, 30 mm and 1.2 mm, 8 mm, respectively, show that the effective pickup-range and resolution of the proposed system have been increased up to 6 m and 1600×1600 pixels, respectively, from 0.064 m and 480×480 pixels of the conventional systems employing the same pickup and display lens arrays. In addition, experiments with an implemented test bed confirms that the proposed system can provide real-time 3-D images in 25 frames per second.     

POLYCATION EFFECTS ON ELECTRONIC SPECTRA OF CONJUGATED POLYMERS IN PROGRAMMED ELECTROSTATIC ASSEMBLIES

A polysaccaride, chitosan, has been used to study polycation effects on electronic spectra of conjugated polymers in programmed electrostatic assemblies. Conjugated polyelectrolytes, poly[2-(3-thienyl)-ethanolhydroxycarbonylmethylurethane] (HPURET) and polydiacetylene from 5,7-dodecadiyn-1,12-bis-(hydroxycarbonylmethylurethane) (HP4BCMU), were assembled from aqueous solution alternately with the polycation, poly (diallydimethylammonium) chloride [PDADMAC], and with the polysaccharide cation, chitosan. Switching polycations did not significantly change the visible absorption spectra for HP4BCMU multilayers. The optical properties of the regiorandom polythiophene, HPURET, depend distinctly on the polycation and the pH of the solution, showing significant differences on visible absorption maxima of the assemblies ranging from 435 nm to 516 nm. After the assemblies were exposed to vapor of aqueous ammonia, they showed UV-vis maxima further red shifted and an enhanced emission intensity, compared to those of the original assemblies. A chitosan/HPURET complex was prepared as a precipitate from solution. Its visible absorption maximum is at 536 nm with a shoulder at 580 nm, reminiscent of regioregular poly(3-alkylthiophenes). This unusual sensitivity of conjugated polymers to polycations may have potential application in sensor devices.     

Specific ionic effect for simple and rapid colorimetric sensing assays of amino acids using gold nanoparticles modified with task-specific ionic liquid

In this study, a novel task-specific ionic liquid functionalized gold nanoparticle (TSIL-GNP) was successfully prepared and applied in the recognition of amino acids. Particularly, the surface of GNP was modified with the ionic liquid containing carbamido and ester group via thiol, which was characterized by Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The stability of this material in aqueous solution improves apparently and can remain unchanged for more than three months. The effect of pH was also discussed in this study. Attractive ionic interaction would effectively weaken intensity of the covalent coupling between the metal ion and the functional groups of amino acids. Thus, TSIL-GNP was successfully applied to recognizing serine, aspartic acid, lysine, arginine, and histidine in the presence of Cu²⁺ through distinctive color changes. Suspension would be generated once a spot of cysteine was added into the GNPs solution. Results indicated that it had a good linear relationship between extinction coefficients and concentration of amino acids in a wide range of 10⁻³–10⁻⁶ M. Moreover, the proposed strategy was successfully used to analyze the histidine in urinary samples. In brief, TSIL-GNP is a suitable substrate for discrimination of five amino acids in a rapid and simple way without sophisticated instruments.     

Carbon dots with strong excitation-dependent fluorescence changes towards pH. Application as nanosensors for a broad range of pH

In this study, preparation of novel pH-sensitive N-doped carbon dots (NCDs) using glucose and urea is reported. The prepared NCDs present strong excitation-dependent fluorescence changes towards the pH that is a new behavior from these nanomaterials. By taking advantage of this unique behavior, two separated ratiometric pH sensors using emission spectra of the NCDs for both acidic (pH 2.0 to 8.0) and basic (pH 7.0 to 14.0) ranges of pH are constructed. Additionally, by considering the entire Excitation–Emission Matrix (EEM) of NCDs as analytical signal and using a suitable multivariate calibration method, a broad range of pH from 2.0 to 14.0 was well calibrated. The multivariate calibration method was independent from the concentration of NCDs and resulted in a very low average prediction error of 0.067 pH units. No changes in the predicted pH under UV irradiation (for 3 h) and at high ionic strength (up to 2 M NaCl) indicated the high stability of this pH nanosensor. The practicality of this pH nanosensor for pH determination in real water samples was validated with good accuracy and repeatability.     

The Effect of Auxiliary Nitrogenated Linkers on the Design of New Cadmium-Based Coordination Polymers as Sensors for the Detection of Explosive Materials

Three new cadmium-based coordination polymers, denoted [Cd(hfipbb)(4,4’-bipy)] ( CdPF-1 ), [Cd(hfipbb)(2,2’-bipy)] ( CdPF-2 ), and [Cd(hfipbb)(1,10-phen)] ( CdPF-3 ), have been hydrothermally synthesized by using the well-known V-shaped organic linker 4,4’-(hexafluoroisopropylidene)bis(benzoic acid) (H₂hfipbb), together with different nitrogenated auxiliary linkers. Considering the d¹⁰ configuration of the transition metal selected, the luminescent properties for these CdPF-n materials were explored, finding that materials CdPF-2 and CdPF-3 act as excellent sensors in the detection of explosive nitro aromatic compounds. The photoluminescence properties of CdPF-2 and CdPF-3 revealed that significant and sensitive fluorescence quenching was observed toward NP (nitrophenol) for CdPF-2 and PA (picric acid) for CdPF-3 in MeOH suspensions.     

基于耦合T型空腔的多重法诺共振现象

提出由T型空腔和挡板组成的两种金属-电介质-金属(MIM)波导结构,分别为:正T型空腔结构和倒T型空腔结构,并应用有限元法系统地研究了该结构的透射特性.对于正T型空腔结构,仿真结果出现了双重法诺共振现象,并且共振波长可以通过改变T型空腔长度和高度进行调节.该结构有助于设计成敏感度达到1 620nm/RIU、品质因数为5.4×10~4的纳米传感器.对于倒置T型空腔,在波导中产生了多重法诺共振现象,其敏感度可达1 560nm/RIU,品质因数为9.37×104.该结构有望在光学集成回路,特别是纳米传感器、光束分路器方面具有广泛应用.