Hot Electron Induced Cathodic Electrochemiluminescence at Disposable Screen Printed Carbon Electrodes

Hot electron induced cathodic electrochemiluminescence (ECL) was observed at screen printed carbon electrodes (SPCEs) during pulse polarization. The thin insulating film resulted from the printing inks was found to be suitable for generating hot electrons, which can further be converted to hydrated electrons and induce the subsequent luminescence. Compared with disposable Al/Al₂O₃ electrode, SPCEs show more stable and reproducible ECL in a wider pH range without background emission. A sensitive ECL method for determination of quercetin is proposed. The detection limit is 8.0×10^?10 mol L^?1(S/N=3), which is two magnitudes lower than that of common ECL method.     

Assessment of accuracy and precision in speciation analysis by competitive ligand equilibration-cathodic stripping voltammetry (CLE-CSV) and application to Antarctic samples

The analytical performances of Competitive Ligand Equilibration with Cathodic Stripping Voltammetric detection of the labile fraction (CLE-CSV) were assessed. This speciation method enables the concentration of natural ligand(s) and their conditional stability constants for the complexation of the investigated metal to be determined through thermodynamic considerations.Literature data were discussed and general trends in the precision of the determined parameters identified: ligand concentrations were affected, on average, by a 10% relative percentage standard deviation (RSD%), whereas conditional stability constants showed much lower precision, with an average RSD% of 50%.New experimental data were collected to obtain a complete assessment of accuracy and precision attainable for the determination of strong ligands at the ultra trace level, enabling the whole protocol to be evaluated. Firstly, the side reaction coefficient alpha for the formation of the complex between the added ligand and the investigated metal (α_CuL) was determined. The method was subsequently applied to the analysis of solution containing ligand at trace levels (5-50 nM) with known complexing characteristics. Copper was used as the model metal ion and ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) as the model ligands. Results evidenced that the CLE-CSV protocol is not affected by systematic errors in the determination of both ligand concentration and the conditional stability constants. Good precision is obtained for ligand concentrations, with an average relative standard deviation (RSD%) of 5%; an average RSD% of 23% was calculated for the conditional stability constants. Including the contribution of the uncertainty in the value of α_CuL in the evaluation of the uncertainty in the latter parameter increased the RSD% up to 40%. The CLE-CSV protocol was subsequently applied to the detection of strong ligands in water samples collected in Antarctica: precision was shown to be comparable with literature data.     

Device quality ZnO grown using a Filtered Cathodic Vacuum Arc

In this paper we report on the structural, electrical and optical characteristics of unintentionally doped ZnO films grown on a-plane sapphire substrates using the Filtered Cathodic Vacuum Arc (FCVA) technique. The resulting films showed considerable promise for device applications with properties including high transparency, moderate intrinsic carrier concentrations (10¹⁷–10¹⁹ cm⁻³), electron mobilities up to 30 cm²/Vs, low surface roughness (typically <2% of film thickness) and well-structured photoluminescence. Post-annealing in oxygen at temperatures up to 800 °C produced significant improvements in the properties of these films. Silver oxide Schottky diodes fabricated on FCVA ZnO showed ideality factors as low as 1.20 and good sensitivity to ultraviolet light.     

Kinetic speciation of nickel in mining and municipal effluents

This study presents the results of kinetic speciation of nickel in undiluted mining and municipal effluents and effluents diluted with receiving freshwaters from the surrounding environment. The dilution ratios used for the dilution of the effluents were arbitrarily chosen, but were representative of the prevailing mining practices. The purpose of the this dilution was to mimic dilution with natural waters that result from dilution of the mining and municipal effluents with receiving freshwaters, so that this study would reveal environmental realities that are of concern to the managers and regulators of water resources. Ligand exchange kinetics using the competing ligand exchange method (CLEM) was studied using two independent techniques: graphite furnace atomic absorption spectrometry (GFAAS) with Chelex 100 resin as the competing ligand, and adsorptive cathodic stripping voltammetry (AdCSV) with dimethylglyoxime (DMG) as the competing ligand to determine the percentage of Ni metal released from Ni(II)–DOC complexes and the rate of dissociation of Ni(II)–DOC complexes. Using a sample containing a mixture of 30% Copper Cliff Mine effluent, 40% Sudbury municipal effluent and 30% Vermillion River water, both techniques gave results showing that the dilution of the effluent samples increased the percentage of nickel released from Ni(II)–DOC complexes. This increase in the release of nickel from the Ni(II)–DOC complexes may be of concern to managers and regulators of water resources. Agreement between the results of these two techniques has enhanced the validity of the competing ligand exchange method used by both techniques.     

X-ray photoelectron spectroscopy of nano-multilayered Zr-O/Al-O coatings deposited by cathodic vacuum arc plasma

Nano-multilayered Zr-O/Al-O coatings with alternating Zr-O and Al-O layers having a bi-layer period of 6-7 nm and total coating thickness of 1.0-1.2 μm were deposited using a cathodic vacuum arc plasma process on rotating Si substrates. Plasmas generated from two cathodes, Zr and Al, were deposited simultaneously in a mixture of Ar and O₂ background gases. The Zr-O/Al-O coatings, as well as bulk ZrO₂ and Al₂O₃ reference samples, were studied using X-ray photoelectron spectroscopy (XPS). The XPS spectra were analyzed on the surface and after sputtering with a 4 kV Ar⁺ ion gun. High resolution angle resolved spectra were obtained at three take-off angles: 15°, 45° and 75° relative to the sample surface.It was shown that preferential sputtering of oxygen took place during XPS of bulk reference ZrO₂ samples, producing ZrO and free Zr along with ZrO₂ in the XPS spectra. In contrast, no preferential sputtering was observed with Al₂O₃ reference samples. The Zr-O/Al-O coatings contained a large amount of free metals along with their oxides. Free Zr and Al were observed in the coating spectra both before and after sputtering, and thus cannot be due solely to preferential sputtering.Transmission electron microscopy revealed that the Zr-O/Al-O coatings had a nano-multilayered structure with well distinguished alternating layers. However, both of the alternating layers of the coating contained of a mixture of aluminum and zirconium oxides and free Al and Zr metals. The concentration of Zr and Al changed periodically with distance normal to the coating surface: the Zr maximum coincided with the Al minimum and vice versa. However the concentration of Zr in both alternating layers was significantly larger than that of Al. Despite the large free metal concentration, the Knoop hardness, 21.5 GPa, was relatively high, which might be attributed to super-lattice formation or formation of a metal-oxide nanocomposite within the layers.     

Bias voltage effect on the structure and property of chromium copper-diamond-like carbon multilayer films fabricated by cathodic arc plasma

Chromium copper-diamond-like carbon (Cr:Cu)-DLC films were deposited onto silicon and by cathodic arc evaporation process using chromium (Cr) and copper (Cu) target arc sources to provide Cr and Cu in the Me-DLC. Acetylene reactive gases were the carbon source and activated at 180 °C at 13 mTorr, and a substrate bias voltage was varied from −50 V to −200 V to provide the (Cr:Cu)-DLC structure. The structure, interface, and chemical bonding state of the produced film were analyzed by transmission electron microscope (TEM), IR Fourier transform (FTIR) spectra, and X-ray photoelectron spectroscopy (XPS). The results showed that the Cr-containing a-C:H/Cu coatings exhibited an amorphous layer of DLC:Cr layer and a crystalline layer of Cu multilayer structure. The profiles of sp³/sp² (XPS) ratios corresponded to the change of microhardness profile by varying the pressure of the negative DC bias voltage. These (Cr:Cu)-DLC coatings are promising materials for soft substrate protective coatings.     

Influence of Gas Entry Point on Plasma Chemistry,Ion Energy and Deposited Alumina Thin Films in Filtered Cathodic Arc

The effect of gas entry point on the plasma chemistry, ion energy distributions and resulting alumina thin film growth have been investigated for a d.c. cathodic arc with an aluminum cathode operated in an oxygen/argon atmosphere. Ions of aluminum, oxygen and argon, as well as ions originating from the residual gas are investigated, and measurements for gas entry at both the cathode and close to the substrate are compared. The latter was shown to result in higher ion flux, lower levels of ionised residual gas, and lower ion energies, as compared to gas inlet at the cathode. These plasma conditions that apply when gas entry at the substrate is used result in a higher film deposition rate, less residual gas incorporation, and more stoichiometric alumina films. The results show that the choice of gas entry point is a crucial parameter in thin film growth using reactive PVD processes such as reactive cathodic arc deposition.     

One-pot electrosynthesis of 2,3-bis(spiro-2-indanyl-1,3-dione)-indeno[1,2-b]furan-4-one

The 2,3-bis(spiro-2-indanyl-1,3-dione)-indeno[1,2-b]furan-4-one has been synthesized by cathodic reduction of 2,2-dibromo-1,3-indandione in dichloromethane-Bu₄NBF₄. In contrast, tris-indanedione was the main product when acetonitrile was used as a solvent. Sunlight exposition of the dispiro compound afforded the tris-indandione in quantitative yield.     

Determination of trace europium by adsorptive cathodic stripping voltammetry after complexation with cupferron

This article describes the determination of Eu by adsorptive cathodic stripping voltammetry after complexation with N-nitroso-N-phenylhydroxylamine (cupferron). The accumulation of the complex at the HMDE was performed at 0.0 V and the subsequent potential scan was made in the square wave mode. The analyte signal occurred at −0.88 V. The detection limit is 0.06 nmol dm⁻³. The effect of instrumental and chemical parameters on the peak height and potential was investigated. The same technique can be used for the determination of ytterbium and of the other rare earth elements (REEs) after separation.     

Ln1−xSrxCoO3(Ln = Sm, Dy) for the electrode of solid oxide fuel cells

The perovskite-type oxides were synthesized in the series of Ln_1−xSr_xCoO₃(Ln = Sm, Dy). The formation of solid solutions in Dy_{1 − x}Sr_xCoO₃ was limited, compared with that in Sm_{1 − x}Sr_xCoO₃. The electrical conductivities of the sintered samples were measured as a function of x in the temperature range 30 to 1000 °C. The highest conductivity of around 500 S/cm at 1000 °C was found in Sm_0.7Sr_0.3CoO₃. The reactivity of all the samples with YSZ was examined at 800–1000 °C for 96 h. The Sr-doped perovskite oxides were more reactive with YSZ and produced SrZrO₃ at 900 °C after 96 h. However, no reaction product between SmCoO₃ and YSZ was observed at 1000 °C for 96 h. The cathodic polarization of the oxide electrodes, sputtered on yttria stabilized zirconia (YSZ), was studied at 800–1000 °C in air. SmCoO₃ shows no degradation of the electrode performance at higher temperatures. The thermal expansion measurements on the sintered samples were carried out from room temperature to 1000 °C. Large thermal expansion coefficients were found in these samples.