Lamellar Organo-Bridged Silicones

The acid-hydrolysis of an organo-bridged bisdiethoxysilylated molecular precursor bearing urea groups, (EtO)₂MeSi(CH₂)₃NHCONH(CH₂)₁₂NHCONH(CH₂)₃SiMe(OEt)₂, has been performed in pure aqueous medium. Scanning electron microscopy (SEM) analysis of the resulting insoluble solid revealed plate-like forms with a lamellar structure as determined by powder X-ray diffraction (PXRD) studies with a sharp peak at 28.5 Å. The solid state ²⁹Si MAS-NMR spectrum of this bridged siloxane hybrid is consistent with a moderately condensed material with complete preservation of the Si–C bonds throughout the hybrid network. In comparison, the classical sol–gel hydrolysis-condensation of the molecular precursor in ethanol with stoichiometric amount of water and fluoride anion as catalyst produced an amorphous featureless solid.     

Application of preparative high-speed counter-current chromatography for the separation of flavonoids from the leaves of Byrsonima crassa Niedenzu (IK)

The methanolic extract of the leaves of the medicinal plant Byrsonima crassa (Malpighiaceae) contain flavonoids with antioxidant activity. They were separated in a preparative scale using high-speed counter-current chromatography. The optimum solvent system used was composed of a mixture of ethyl acetate-n-propanol-water (140:8:80 (v/v/v)) and led to a successful separation between monoglucosilated flavonoids (quercetin-3-O-alpha-L-arabinoside, quercetin-3-O-beta-D-galactoside) and the biflavonoid amentoflavone in only 3.5 h. The purities of quercetin-3-O-alpha-L-arabinoside (95 mg), quercetin-3-O-beta-D-galactoside (16 mg) and the biflavonoid amentoflavone (114 mg) were all isolated at purity over 95%. Identification was performed by 1H NMR, 13C NMR and UV analyses.     

Direct analysis of fly ash materials by inductively coupled plasma atomic emission spectrometry using slurry nebulization

Fly ash samples of cement works were analysed using slurry nebulization inductively coupled plasma atomic emission spectrometric (ICP-AES). Because of the influence of the experimental factors on the signal intensity, the optimal conditions of the analysis circumstances were determined. Control analyses (wet digestion followed by ICP-AES, and XRF of dry powders (pressed pellets)) were also carried out to compare the results. Based on the result, it was concluded that the slurry nebulization method using slurry standard of same type reference material for calibration can be applied for rapid but less precise (RSD 5–10%) determination of the elements in fly ash.     

层状LiMnO_2正极材料的研究进展

层状LiMnO2 化合物的研究是目前锂离子电池正极材料锂锰氧化物研究工作的新热点 ,本文综述了近年来国内外LiMnO2 化合物的研究进展 ,主要阐述了具有层状和扭曲层状结构的m LiMnO2和o LiMnO2 的结构、电性能、合成和改性方法等方面的研究状况 ,重点介绍了离子交换法合成层状LiMnO2 的原因和机理。探索新的合成方法和掺杂其它金属离子改性以提高循环性能是今后LiMnO2 的研究趋势。     

Luminescence Properties of Tb-Doped Yttrium Disilicate Prepared by the Sol–Gel Method

A sol–gel method for the synthesis of nanosized powders of yttrium disilicate doped with Tb^{3 +} is presented. The influence of grain size and annealing temperature on the structure and luminescence properties of the materials obtained has been investigated. The preparation of glass-ceramic composite has been also described. The effect of incorporating the nanocrystals into sol–gel silica glasses on their physicochemical properties has been shown and discussed. A lack of influence of the annealing above 1300°C on the lifetimes measured for the nanocrystals embedded in the glass, as compared to the Y₂Si₂O₇:Tb^{3 +} powders, has been observed.     

无机分子纳米材料的研究进展

无机分子纳米材料是至少在一个维度上为纳米尺寸的分子及以其为单元组成的材料。由于其特殊的结构和性质，这种材料可以作为未来纳米分子电子器件、小分子吸附及储存材料。本文将从合成、结构、性质、应用等方面, 结合最新进展对这一充满活力并有着应用前景的领域作一简要概述。     

Mesoporous electrode material from alumina-stabilized anatase TiO2 for lithium ion batteries

A mesoporous electrode material whose structure is composed of anatase nanocrystals stabilized by alumina is reported. Powder X-ray diffraction shows the anatase phase only, but micro-Raman spectroscopy shows that the materials have a core-shell morphology with grains of bulk anatase covered by a thin rutile layer on the surface. This structure is unique when compared to analogous materials stabilized by zirconia (PNNL-1). Nitrogen adsorption isotherms demonstrate a monotonous increase in surface area and mesopore volume with increasing Al content. Thin film electrodes from these materials were characterized by lithium insertion electrochemistry. Cyclic voltammograms exhibit significant differences in Li accommodation in Al-free and Al-stabilized materials.     

三维有序大孔杂化材料SiW11O39^8——SiO2和γ—SiW10O36^8——SiO2的制备与表征

通过溶胶 -凝胶和聚苯乙烯模板等方法制备了含缺位 Keggin阴离子 Si W1 1 O8- 3 9和 γ-Si W1 0 O8- 3 6的三维有序大孔杂化氧化硅复合材料 ,并通过紫外漫反射光谱 ( UV/ DRS)、傅里叶变换红外光谱 ( FTIR)、固体核磁共振波谱 ( MAS NMR)等手段对其结构进行了表征 .结果表明 ,杂化材料中的 Keggin阴离子仍保留其基本骨架结构 ,但其与氧化硅基体之间存在化学作用 .杂化材料的孔道结构用扫描和透射电子显微镜 ( SEM和TEM)进行表征 ,其平均孔径为 ( 335± 5 0 ) nm.对杂化材料孔壁的微孔性通过氮气吸附进行了测定 .此类材料对水溶液中羟基丁二酸的降解反应具有活性 ,光催化过程中未发现 Keggin阴离子自载体中脱落的现象 .     

La2O3,Y2O3-Mo次级发射材料研究

采用粉末冶金方法制备了La2O3，Y2O3-Mo次级发射材料，测试了各种材料的次级发射系数。结果表明在钼中加入稀土氧化物可以具有很好的次级发射性能。经过激活处理后，材料的最大次级发射系数均高于2．0，达到了材料使用要求的发射水平。应用扫描电镜(SEM)和光电能谱仪(XPS)研究了稀土元素在烧结体断口和发射前后在试样表面的分布情况。分析结果表明稀土元素易于在晶界处偏聚，且发射后试样表面稀土元素的相对浓度明显高于发射前的浓度。