Surfactant in the gaseous phase II. Influence on stability of foams and thin liquid films

The influence of the vapors ofn-amyl orn-decyl alcohol on the stability of single thin liquid films, single bubbles, and foam columns was determined. It was found that the presence of surfactant vapors lowered the stability of foams and single foam films. The mechanism of the destabilizing action of the surfactant vapors on wet, dynamic foams under dynamic conditions is discussed. It is shown that the destabilizing action of the surfactant vapors is a further indication that surface elasticity forces are the main factor determining stability of wet, dynamic foams.     

Effect of concentration on surfactant micelle shapes —A molecular dynamics study

Many aspects of the behavior of surfactants have not been well understood due to the coupling of many different mechanisms. Computer simulation is, therefore, attractive in the sense that it can explore the effect of different mechanisms separately. In this paper, the shapes, structures and sizes of sodium dodecylbenzenesulfonate (SDBS) micelles under different concentrations in an oil/water mixture were studied via molecular dynamics (MD) simulations using a simplified atomistic model which basically maintains the hydrophile and lipophile properties of the surfactant molecules. Above the critical micellar concentration (cmc), surfactant molecules aggregate spontaneously to form a wide variety of assemblies, from spherical to rodlike, wormlike and bilayer micelles. Changes in their ratios of the principle moments of inertia (g₁/g₃, g₂/g₃) indicated the transition of micelle shapes at different concentrations. The aggregation number of micelle is found to have a power-law dependence on surfactant concentration.     

Dynamic surface tension of micellar solutions studied by the maximum bubble pressure method

A theoretical model for the dynamic surface tension of an air bubble expanding in micellar surfactant solution is proposed. The model accounts for the effect of expansion of the bubble surface during the adsorption of surfactant molecules (monomers) and the effect of disintegration of polydisperse micelles on the surfactant diffusion. Assuming small deviations from equilibrium and constant rate of expansion analytical expression for the surface tension and the subsurface concentration of monomers as a function of time is derived. The characteristic time of micellization is computed from the experimental data for two surfactants (sodium dodecyl sulfate and nonylphenol polyglycol ether) obtained by the maximum bubble pressure method.     

PREPARATION OF PERFLUOROOCTANOYL-MODIFIED POLY(VINYL-ALCOHOL)S AND THEIR ADSORPTION AT AN AIR-WATER INTERFACE

Perfluorooctanoyl modified poly(vinyl alcohol)s (FPVA) were prepared by means of substituting a small amountof hydroxyl groups on the backbone of poly(vinyl alcohol), for which the initial degree of polymerization is equal to 1750.The substitution extent, defined by the number of substituting units in a chain, for the four FPVA samples was in the range of0.5-5 perfluorooctanoyl groups per chain. The FPVA samples with the highest substitution extent still had good solubility inwater. It was shown by experimental measurement at 30.0±0.1℃ that the surface tension of the aqueous solution of thehighest substituted FPVA decreased to 16.6 mN/In at a higher concentration, e.g about 0.1 g/mL. Obviously,macromolecules of FPVA exhibit a very strong tendency to adsorb at the air-water interface, because the hydrophobicperfluorooctanoyl groups in FPVA have a very high surface activity as they are in small molecular fluorinated surfactants.The chain conformation of such a model polymer adsorbed on the air-water interface was also discussed.     

Conformation of poly(L-glutamic acid) in aqueous solutions of linear amphiphiles with a cationic group at both ends

The conformations of poly(l-glutamic acid) [P(Glu)] in solutions of the bipolar amphiphile 1,20-icosanediylbis(alkylammonium chloride) [C20(RA)₂], where RA includes trimethylammonium (TMA), dimethylammonium (DMA), or methylammonium (MA), were investigated with measurements of the circular dichroism spectra at 10–35 °C. All C20(RA)₂ induced an α-helix of P(Glu) in the aqueous solutions. The residue molar ellipticity at 222 nm showed a similar dependence on the amphiphile concentration (C _s) below 0.5 of the ratio of 2C _s to the residue concentration (C _p) of P(Glu), but it separated into three directions at 2C _s/C _p>0.5. C20(MA)₂ induced an α-helix of P(Glu) at 2C _s/C _p<0.5 followed by a helix aggregate at 2C _s/C _p>0.5. C20(DMA)₂ and C20(TMA)₂ also induced an α-helix, but a helix aggregate. C20(TMA)₂ indicated a strong temperature dependence and did not induce a complete α-helix at 35 °C. Received: 20 June 2001 Accepted: 6 September 2001     

稳态荧光探针法测定三聚季铵盐表面活性剂的胶束聚集数

以芘为荧光探针, 十六烷基氯化吡啶(CPC)为猝灭剂, 以芘的饱和水溶液为溶剂配制表面活性剂溶液, 根据芘的荧光强度之比I1/I3随表面活性剂水溶液浓度的变化, 测定了三聚季铵盐表面活性剂CTTTA的cmc值, 测定值与表面张力法测定的cmc值一致；当猝灭剂CPC的浓度取0.1~0.3 mmol·L-1范围时, 用稳态荧光探针法测定了CTTTA的胶束聚集数. 实验数据表明, 表面活性剂溶液浓度为6~10倍cmc时, 胶束聚集数N随表面活性剂浓度增大而线性增大, 并用外推法得到CTTTA的临界胶束聚集数.     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

WATER MOVEMENT CAUSED BY SPREADING SURFACTANTS IN UNSATURATED SYSTEMS OF PARTICLES OF NONUNIFORM SIZE

The movement of water originated by the spreading of two surfactants was analyzed in glass beads as well as on soil systems, both of particles of nonuniform size

The higher difference of surface tension produced in the system by 1 -hexadecanol compared to that of 1-tetradecanol led therefore to a higher amount of water moved. Decreased proportion of the smaller sized particles in glass beads system produced a decrease in the total water moved by both surfactants.

Organic matter acted in soil as a second surfactant in glass beads. This effect was compared in glass beads systems once 1-hexadecanol was evenly distributed among the particles as continuous film, which played a role alike that of organic matter in soil and then a second surfactant 1-tetradecanol was added. These additional surfactant effect diminished the difference between initial and final surface tension (surface tension depression) of the system and so the total water moved.

The soil organic matter (1.7%) modified the water movement curve in the presence of low (0.2g) content of 1-hexadecanol, whereas for high content of either alcohol (0.4g) or low content of 1-tetradecanol content (0.2g) the water movement curves were the same     

Effect of anionic surfactant on alginate‐chitosan polyelectrolyte multilayer thickness

Alginate and chitosan are among the most common biopolyelectrolytes. Surfactants can be included in alginate and chitosan formulations in order to improve their physical and functional properties. In the present study, the effect of the anionic surfactant sodium dodecyl sulfate (SDS) on alginate‐chitosan polyelectrolyte multilayer (PEM) films is reported for the first time. Layer‐by‐layer deposition technique was employed to prepare the PEM samples and the samples were characterized by ellipsometry, X‐ray reflectivity, atomic force microscopy, and quartz crystal microbalance with dissipation. Incorporation of SDS into PEM formulations increased the film thickness and an increased adsorption behavior between alginate and chitosan layers are observed. Since the concentration of SDS was below its critical micelle concentration, no micelle formation was expected and hydrophobic‐hydrophobic interaction between alginate and SDS might be the main reason. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1798–1803     

Nanocrystalline cellulose/fluorinated polyacrylate latex via RAFT‐mediated surfactant‐free emulsion polymerization and its application as waterborne textile finishing agent

A simple method for nanocrystalline cellulose (NCC)/fluorinated polyacrylate was developed by RAFT‐mediated surfactant‐free emulsion polymerization, in which the nanocomposites formed a core‐shell spherical morphology. The influence of the content of NCC‐g‐(PAA‐b‐PHFBA) (AA was acrylic acid, HFBA was hexafluorobutyl acrylate) on the properties of latex and film were systematically studied. The monomer conversion, the tensile strength, and water–oil repellency of film increased first and then decreased, the latex particle size decreased first and then decreased, when the content of NCC‐g‐(PAA‐b‐PHFBA) increased from 1 to 6 wt %. Elongation at break and thermal stability distinctly decreased when the content of NCC‐g‐(PAA‐b‐PHFBA) gradually increased. XPS showed that the fluorine‐containing groups well concentrated at the film–air interfaces during the annealing process. SEM analysis revealed that the treated fiber had a rugged surface, and the treated fabric had an excellent water repellency. In addition, this green grafting method in water offered a new perspective for the fabrication of exceptional NCC‐based nanocomposites with NCC as the core and also helped to promote the potential applicability of NCC in a range of multipurpose applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1305–1314