介孔分子筛MSU-1的合成

MSU X介孔分子筛具有三维立体交叉排列的蠕虫状孔道结构,有利于客体分子在其孔道内扩散[1]。目前合成MSU X的原料[2 4]TEOS水解速度慢,合成过程较易控制,但价高、易燃、有刺激性。本文采用文献[5 7]法,以水玻璃、A(EO)9为原料,在酸性至近中性的范围里合成了MSU 1介孔分子筛,与TEOS为原料的MSU 1合成进行了比较,考察了pH值和不同类型表面活性剂(脂肪醇聚氧乙烯醚和烷基酚聚氧乙烯醚)对产物结构性质的影响。1　实验部分1 1　试剂和仪器水玻璃(SiO2%≈26、Na2O%≈8),工业级,青岛海洋化工厂生产;脂肪醇聚氧乙烯醚非离子表面活性…     

磷酸酯甜菜碱两性表面活性剂的合成与性能

磷酸酯甜菜碱从皮肤溶出的氨基酸量少,脱脂低,毒性和刺激性低,易降解,是一类性能优良两性表面活性剂[1,2]。它的合成大多以长链卤烷或胺为原料,成本较高。本文以高级脂肪醇、氯乙醇以及二甲胺为原料、P2O5为磷酸化剂,合成了C12H25OCH2CH(OOCCH3)CH2N+(CH3)2CH2CH2OP(O)(O )(OH)磷酸酯甜菜碱。测定了表面张力、泡沫性能、钙皂分散力及增溶能力。1　合成十二烷基缩水甘油醚(Ⅰ)[2]　在500ml三颈烧瓶中加入月桂醇0 2mol,正已烷200ml和四丁基溴化铵0 01mol;在室温和强烈搅拌下加入50%的NaOH水溶液48g,滴加环氧氯丙烷0 4mol后升…     

Determination of the surface tension of surfactant solutions applying the method of Lecomte du Noüy (ring tensiometer)

Summary Starting from a comparative assessment of the outstanding works on the ring method (du Noüy) for the determination of the surface tension of liquids and its solutions it is shown that the application of this method to surfactant solutions can lead to substantial errors if one follows conventional conditions. These errors are mainly connected with so far unknown phenomena occurring during the raising of the ring and concerning the influence of the hydrophilic vessel wall above the solution level and the stretching of the solution surface. This is demonstrated quantitatively with surfactant solutions of different kind and concentration. These effects can be explained theoretically very simply by introducing certain assumptions on the behaviour of a surfactant adsorption layer on the inner vessel wall. Conditions leading to the elimination of these errors are given, thus enabling the application of the ring method to the determination of the surface tension of surfactant solutions.With 10 figures and 3 tables     

Studies on the interactions between anionic surfactants and polyvinylpyrrolidone: Surface tension measurement, 13C NMR and ESR

 The interaction between anionic surfactants and polyvinylpyrrolidone (PVP) are investigated using ¹³C NMR, ESR spectroscopy and surface tension measurements at the air/water interface. The behavior of single-chained surfactant, sodium dodecyl sulphonate (AS), is compared with that of the double-chained surfactant, sodium bis(2-ethylhexyl) phosphate (NaDEHP). The results showed that a surfactant–polymer complex of “necklace and head structure” is formed in AS aqueous solutions in the presence of PVP due to the hydrophobic interaction between PVP and AS. The AS micelles nucleate on the polymer hydrophobic sites, and the mobility of the AS head groups is not affected. But, for NaDEHP surfactant, it was found that PVP is little effective in influencing the monomer–micelle equilibrium and no surfactant– polymer complex formed in the NaDEHP aqueous solution. Received: 8 May 1996 Accepted: 14 August 1997     

Fractal metal nanoparticle aggregates morphology formation mediated by polyelectrolyte/surfactant complex films at interfaces

In this work, the gold nanoparticle self-assembly behavior of mica-surface-confined polyelectrolyte/surfactant complex films was investigated. First, modified partially hydrated polyacrylamide (MHPAM)/hexadecyltrimethylammonium bromide (CTAB) complex films were deposited on the mica surface using Langmuir–Blodgett technique. Then, the preadsorbed MHPAM/CTAB complex film mica plate was dipped into the gold aqueous solution and the interesting fractal nanostructured gold network was formed. In addition, the effect of dipping time on gold nanoparticle self-assembly morphology was studied. The mechanism of formation process is briefly proposed.     

A Novel Synthesis of Two-dimensional Nanopatterned TiO2 Thin Film

Recently the research on structures with an ordered two-dimensional(2D) pattern has attracted great attention due to its versatile applications in the fields of microelectronic and optoelectronic devices, displays, biochips and sensors, enzymatic immobilization, drug carriers, and photonic band gap materials. Various well-arrayed 2D structures have been made by the modern technique such as laser writing pattern fabrication, photoetching technique, micro-electromechanical systems based on scann…     

水中阴离子表面活性剂的吸附分光光度法测定

研究萘基二苯甲烷与阴离子表面活性剂的缔合反应及缔合物在聚合物颗粒表面的吸附及洗脱 ,提出了碱性艳蓝BO分光光度法测定河水中的阴离子表面活性剂 ;碱性艳蓝BO与十二烷基苯磺酸钠、十二烷基硫酸钠、十二烷基磺酸钠的缔合物的表观摩尔吸光系数分别为3.76×104、3.63×104、2.15×104L·mol -1·cm -1 ,方法的线性范围为0.0～2.0mg/L,相对标准偏差3.8% (n=8);应用该法测定河水中阴离子表面活性剂含量 ,结果令人满意     

溶剂热法制备纳米氧化镍及其表征

以乙酰丙酮镍、油酸、油胺为原料，十八烯为溶剂，聚乙烯吡咯烷酮为表面活性剂，采用溶剂热法，在不同反应条件制备了纳米级氧化镍材料.通过X射线衍射（X-ray diffraction，XRD）、透射电子显微镜（Transmission electron microscope，TEM）、紫外-可见光吸收光谱（Ultraviolet-visible spectroscopy，UV-Vis）光谱分析以及塔菲尔（Tafel）测试考察了反应物比例、保温时间、表面活性剂（PVP）、油胺的量对产物微结构、粒径、形貌、光学以及电化学活性性能的影响.实验结果表明：在反应物n[Ni（acac）₂]∶n（OA）=1∶2、添加剂PVP质量分数为1.66%、油胺物质的量为30 mmol、200℃下保温8 h时，可获得粒径约为30～40 nm纯相氧化镍，具有最佳电化学活性，交换电流密度为J₀=1.23×10^-2 mA·cm^-2.     

Dynamic surface tension of micellar solutions studied by the maximum bubble pressure method. 1. Experiment

The effect of the micelles on the dynamic surface tension of micellar surfactant solutions is studied experimentally by means of the maximum bubble pressure method. Different frequencies of bubbling ranging approximately between 1 and 30 s^–1 are applied. The time dependence of the surface tension is calculated using a dead time correction. Water solutions of two types of surfactants with different concentrations are investigated: sodium dodecyl sulfate and nonylphenol polyglycol ether. The surface tension relaxes more quickly in the presence of micelles. The characteristic times of relaxation of the surface tension seem to be in the millisecond range. The time constants observed experimentally are explained in terms of the theory of surfactant diffusion affected by micellization kinetics.     

Surfactant effect on enhancing (S)-naproxen prodrug production from racemic naproxen by lipase

In the enantioselective esterification of racemic naproxen with 4(2-hydroxyethyl) morpholine by Lipase MY in organic solvents, a productivity improvement of the desired (S)-naproxen ester from 0.42 to 0.72 mM at the reaction time of 130 h was observed, when the surfactantbis (2-ethylhexyl) sodium sulfosuccinate (AOT) was added in the reaction mixture. The presence of a small amount of exogenously added water dramatically activated the enzyme in AOT/cyclohexane-reversed micelles. Desorption of the surfactant molecule from the enzyme mass and solubilization of the enzyme into reversed micelles were used to elucidate an existing maximum of the initial rate of (S)-naproxen synthesis with the water content. Moreover, the effects of alcohol and surfactant concentration on the enzyme activity are reported.