甲烷部分氧化制合成气：Ⅲ.镍系催化剂物性及与催化性能间的关联

使用ＴＰＲ和Ｈ２－ＴＰＤ技术对镍铝系催化剂的还原和氢脱附性能进行了研究，并与其催化性能相关联。结果发现，镍铝系催化剂的氢脱附能力与其催化性能之间有一定联系，脱附氢能力越强，催化剂的甲烷部分氧化反应性能就越好，但催化性能与还原性能无直接关联。     

A Method for the Acetylation of Alcohols Catalyzed by Heteropolyoxometallates

Summary. Esterifications of acetic acid with some linear, secondary, tertiary, and benzylic alcohols mediated by catalytic amounts of Keggin, Wells–Dawson, and Preyssler type heteropolyacids were carried out under reflux at mild reaction conditions with good to excellent yields. Among the examined catalysts, H₃PW₁₂O₄₀ and H₁₄NaP₅W₃₀O₁₁₀ revealed better results than other heteropolyacids. This work was performed with the aim of simplifying the esterification process by omitting any solvents and mineral acid catalysts. Easy work-up, low cost, and acidic waste reduction, which are all important features from the environmental and economical points of view, are distinct aspects of this protocol. Heteropolyacid catalysts could be separated after a simple work-up and reused for several times.     

中空纤维催化膜反应器中环戊二烯的选择加氢反应

将聚乙烯吡咯烷酮（ＰＶＰ）负载钯催化剂（ＰＶＰ－Ｐｄ）镶嵌到三种醋酸纤维（ＣＡ）中空膜（ＣＡ－Ｉ，ＣＡ－Ⅱ，ＣＡ－Ⅲ）内制各中空纤维催化膜，并进一步制成催化膜反应器，在４０℃和０．１ＭＰａ的反应条件下，在催化膜反应器中进行了环戊二烯的选择加氢反应，考察了具有不同氢气渗透率的醋酸纤维丝组成的三种膜反应器对反应的转化率及选择性的影响，并在此基础上考察了各种反应参数对反应的影响，ＣＡ中空纤维催化膜对环戊     

同步荧光法同时测定苯甲酸和水杨酸的研究

根据苯甲酸与水杨酸在酸性条件下荧光光谱出现的差异，用同步荧光法同时测定其混合物中二组份。苯甲酸及水杨酸的检测限分别为０．２４μｇ／ｍＬ和０．２５μｇ／ｍＬ相对标准偏差分别为１．３％和１．２％。方法用于商品杀菌腐剂中苯甲酸与水杨酸的同时测定，结果满意。     

新型芳基双西佛碱及其Ni（Ⅱ）,Fe（Ⅲ）配合物的合成

新型芳基双西佛碱及其Ｎｉ（Ⅱ），Ｆｅ（Ⅲ）配合物的合成蓝仲薇，严洪兴，李莉，余孝其（四川大学化学系，成都６１００６４）关键词西佛碱，合成，催化活性西佛碱除广泛用作螯合剂、稳定剂、分析试剂和生物活性剂以外。近年研究表明，其单核和双核金属配合物对于催化作...     

(NiV13O38)7-的电子结构和催化性质的探讨

使用SCC－DV－Xα方法研究了高钒杂多化合物（NiV13O38）7-的电子结构，并探讨了它的催化性质·结果表明，（NiV13O38）7-是一种比Keggin结构更强的催化剂。分析了该阴离子中的键的强弱关系，认为配位数越少的氧与V形成的键越强．并分析了前线轨道HOMO，LUMO的组成，从而得出它的催化活性中心是Ni，V、一配位端氧，二、三配位桥氧，五配位中心氧的结论。     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

Analytical applications of a differential technique in laser-induced fluorimetry: accurate and precise determination of uranium in concentrates and for designing microchemielectronic devices for on-line determination in processing industries

A novel instrumental technique for the direct, fast, accurate, and precise determination of uranium in concentrates and other U-rich materials (as well as to mineralized rocks) is presented. The proposed technique is an absolute methodology, based on the comparison of the fluorescence of the accurately known standard with a sample of similar but unknown concentration in the low operational range of the instrument (on same sample-dilution basis), by the use of H₃PO₄-NH₄H₂PO₄ as a fluorescence-enhancing reagent. The relative standard deviation of the proposed technique was 0.5-0.9% (n=9) at 18.1, 36.2, 61.2, and 99.6% U₃O₈. The proposed technique is suitable for the determination of uranium in samples arising from exploration projects, ores from mining operations, mill process samples, uranium ore concentrates leading to fuel fabrication as well as samples from environmental monitoring containing up to 100% uranium. The results are in good agreement with those obtained by titrimetric, gravimetric, and TBP extraction-H₂O₂ spectrophotometric methods. The precision of the technique is within the acceptable ‘pure geochemistry’ type of analysis (R.S.D. ∼ 1.0%) and is comparable even those obtained with titrimetric and gravimetric assay. The proposed differential technique coupled with flow injection may open up new advancement in instrumentation leading to design and development of microchemielectronic devices for direct on-line determination, more compatible with the tools of computer age as also to help in handling of radioactive solutions in chemical laboratories in uranium processing industries.