Kinetics of no decomposition over Cu/ZSM-5 catalyst

The kinetics of catalytic decomposition of NO over Cu/ZSM-5 catalyst has been studied in an integral flow reactor at atmospheric pressure. Kinetic analysis is based on the assumption that the surface reaction represents the rate-determining step. On the basis of theoretical considerations of different interactions between reactants and catalyst, and experimental evidences, three different mechanistic kinetic models were chosen. Also a power-law model was tested. The best agreement has been achieved with the model

催化动力学光度法测定微量钯

在硫酸 ( 1 + 1 )介质中 ,Pd(Ⅱ )催化过氧化氢氧化酸性铬蓝K的褪色反应。研究了反应的最佳条件 ,建立了催化光度法测定痕量钯的新方法。方法的最低检测限为 5 97× 1 0 - 4 μg/mL。线性范围为 5 97× 1 0 - 4 ～ 2 60× 1 0 - 2 μg/mL。该法用于合成样品和含钯催化剂的分析     

催化动力学极谱法测定痕量钼

在稀Ｈ２ＳＯ４介质中，钼（Ⅵ）对硫酸联氨还原乙基橙的反应有强烈的催化作用。建立了催化动力学极谱法测定痕量钼的新体系，方法线性范围为２０－３００ｎｇ／ｍＬ，检出限为３．５４ｎｇ／ｍＬ。方法应用于尿中中钼的测定，结果满意。     

FIA-fluorimetric determination of adrenaline in pharmaceutical formulations by oxidation with molecular oxygen

The fluorimetric determination of adrenaline is carried out in a continuous-flow assembly and by means of the molecular dissolved oxygen. The sample solution merges with an NaOH stream, then the resulting mixture is heated at 73 °C and led to the flow-cell of the fluorimeter. The flow-assembly is very simple and the procedure is quick (107 samples h^–1) reproducible (R.S.D. 0.6%), selective and suitable to be applied to determination of adrenaline in formulations. Calibrations graph are linear over the ranges 0.05–15 and 20–40 mgl^–1.     

PREPARATION OF CUO/γ-Al2O3 CATALYSTS FOR CATALYTIC COMBUSTION VOCS VIA PLASMA

CuO/γ-Al2O3 catalysts were prepared by plasma treatment and conventional impregnation methods. The catalytic combustion of two kinds of volatile organic compounds (VOCs), toluene and benzene, were carried out over these CuO/γ-Al2O3 catalysts. The surface properties of these catalysts were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The experimental results showed that in catalytic combustion the activity of the CuO/γ-Al2O3 catalyst prepared via plasma was much higher than that of the CuO/γ-Al2O3 catalyst prepared by conventional impregnation method. XRD results showed that an enhanced dispersion had been achieved with the plasma treatment. SEM results indicated that the size became much smaller and the surface became more uniform with the plasma treatment.     

催化光度法测定痕量铜的新体系研究

报道了在Ｈ２ＳＯ４介质中，溴代十六烷基吡啶和活化剂乙二胺存在下，痕量铜催化抗坏血酸还原ＣａｄｉｏｎＩ（苯基重氮氨基偶氮苯）的褪色反应，测定了反应表现活化能，探讨了反应机理，建立了选择性地测定痕量铜的新方法，线性范围为０～１．４μｇ／２５ｍＬ，方法用于人发及食品中痕量铜的测定，结果满意。     

氨-碘酸盐介质中白喉类毒素的平行催化氢波

在 0 .4mol/LNH3 NH4Cl (pH 8.3 1 )介质中 ,白喉类毒素 (DT)于 - 1 .89V(vs.SCE)处产生的极谱催化氢波可被碘酸钾进一步催化 ,峰电流明显增大 ,但峰电位不变 ,产生一种氢的新动力波 ,建议称其为平行催化氢波。在 0 .4mol/LNH3 NH4Cl(pH 8.3 1 ) - 5 .0× 1 0 - 3 mol/LKIO3介质中 ,DT平行催化氢波的二阶导数峰电流与其浓度在 0 .2 μg/mL～ 1 .0 μg/mL内呈线性关系 ,可用于生物制品中DT含量的测定。     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.     

测定痕量锰的锰(Ⅱ)-锌试剂-重铬酸钾体系催化分光光度法

在Na2B4O7-NaOH缓冲介质及加热条件下 ,锰 (Ⅱ )对重铬酸钾氧化锌试剂引起褪色 ,有明显的催化作用 ,据此建立了测定痕量锰的新方法 ;该法的线性范围为0.69～40μg/L,检出限为0.22μg/L ,反应表观活化能为87.1kJ/mol,反应表观速率常量1.10×10-3/s,用该法测定蒙药样品中锰含量 ,结果令人满意     

聚苯胺尿酸酶电极性能的研究

依据pH对聚苯胺尿酸酶电极最大响应电流的影响, logim～pH图表明尿酸酶电极的催化活性只与其电离基团的碱性形式有关. 扫描电镜的结果表明, 聚苯胺尿酸酶电极的稳定性与其制备方法有关. 电化学法固定的尿酸酶电极具有高的稳定性.